Robbert van der Helm
3be5e3fa99
Add a widget that controls the SC editor mode
2023-03-18 14:25:41 +01:00
Robbert van der Helm
c9793c6901
Add an editor mode enum for Spectral Compressor
...
To indicate that the GUI has been expanded.
2023-03-18 14:25:41 +01:00
Robbert van der Helm
f6041789cd
Use computed sizes for ViziaState
2023-03-07 21:22:15 +01:00
Robbert van der Helm
e3a923ff3b
Avoid restoring window sizes with ViziaState
...
Unless specified otherwise. This avoids some bugs where old, now
incorrect sizes are being recalled.
2023-02-28 18:50:15 +01:00
Robbert van der Helm
a14b4cf61e
Fix years in copyright headers
2023-02-27 00:59:56 +01:00
Robbert van der Helm
338f79e6be
Save and restore Spectral Compressor editor state
2023-02-26 17:35:04 +01:00
Robbert van der Helm
083326a933
Revert addition of Spectral Compressor standalones
...
Until the standalones at least have some way to change parameter values
without a GUI these probably shouldn't be published with standalones.
2023-02-26 16:25:11 +01:00
Robbert van der Helm
49e99eef53
Update the JACK bindings
...
We should no longer have to use our own fork for this.
2023-02-26 16:23:24 +01:00
Robbert van der Helm
72c43adda6
Mark the Spectral Compressor struct as pub
...
For testing with standalones.
2023-02-23 22:55:15 +01:00
Robbert van der Helm
e8fd18ab80
Completely reword the audio IO layout system
...
Instead of a VST3-style polling function to test if a plugin supports a
certain layout, the plugin now explicitly enumerates the supported
layouts. This aligns better with non-VST3 plugin formats.
2023-02-20 16:57:32 +01:00
Robbert van der Helm
d6184ea06e
Replace VST3 category string with enum slice
...
I've been putting this off for a while, but now is finally the day. We
already did this for CLAP a while back. This is both simpler and less
error prone.
2023-02-01 16:09:03 +01:00
Robbert van der Helm
c8ed795524
Add a SysExMessage type to Plugin
...
This is needed to enable sending and receiving SysEx #54 . Because
associated type defaults still are not stable, this requires every
plugin that doesn't need this to set this to the unit type:
```rust
type SysExMessage = ();
```
2023-01-31 18:18:41 +01:00
Robbert van der Helm
cf52d60a61
Make the Spectral Compressor title link to GitHub
2023-01-16 01:18:32 +01:00
Robbert van der Helm
77cbef5f82
Add the Spectral Compressor version to the GUI
2023-01-16 01:17:07 +01:00
Robbert van der Helm
b56d8771f3
Add a changelog for Spectral Compressor
2023-01-16 00:58:46 +01:00
Robbert van der Helm
9f560b2c5c
Bump Spectral Compressor version
2023-01-15 18:28:49 +01:00
Robbert van der Helm
1e83d29fab
Change SC to work in the decibel domain
...
This makes the soft-knee function differentiable and the performance
should in theory be slightly higher when using these fast gain<->dB
conversion functions. This also fixes the high-frequency rolloff not
working correctly for the downwards compressors.
2023-01-15 18:28:49 +01:00
Robbert van der Helm
1c80331829
Fix incorrect MIN_OVERLAP_TIMES calculations
...
These aren't actually used which is why this never came up. The
other (similarly unused) constants were calculated correctly.
2023-01-14 00:16:57 +01:00
Robbert van der Helm
8a4720e427
Update Spectral Compressor for cosmic-text changes
2023-01-12 19:03:02 +01:00
Robbert van der Helm
bb521fcb82
Upgrade Vizia for the cosmic-text changes
...
This brings some breaking changes, and vertical positioning of text may
have changed slightly.
2023-01-12 19:03:02 +01:00
Robbert van der Helm
bdc8537f3f
Add explicit .max(f32::EPSILON) back in SC
...
`util::db_to_gain_fast()` doesn't snap to 0, but for low enough values
it will still become 0 eventually.
2023-01-11 15:21:18 +01:00
Robbert van der Helm
27acce3237
Remove the DC filter from Spectral Compressor
...
It's not needed anymore and the behavior is confusing. This was added to
prevent upwards compression and gain increases on DC values from blowing
up. But we no longer do upwards compression on DC bins anyways.
2023-01-08 00:03:38 +01:00
Robbert van der Helm
cb827d18dd
Rename Buffer::len() to Buffer::samples()
...
To reduce ambiguity.
2023-01-05 16:04:38 +01:00
Robbert van der Helm
11d9476a5f
Use db_to_gain_fast() in plugins
2023-01-04 17:05:13 +01:00
Robbert van der Helm
ab9adaf13e
Update copyright notices for 2023
...
Happy new year!
2023-01-01 18:52:44 +01:00
Robbert van der Helm
82b7426689
Namespace custom CLAP features
2022-11-22 21:09:32 +01:00
Robbert van der Helm
babe271556
Fix font size in Spectral Compressor disclaimer
2022-11-17 18:17:58 +01:00
Robbert van der Helm
aa7d5195ce
Grab plugin URLs from the Cargo.toml file
2022-11-11 20:26:39 +01:00
Robbert van der Helm
d4b93cfdee
Add URLs to the plugin Cargo.toml files
2022-11-11 20:26:39 +01:00
Robbert van der Helm
922a81f654
Drop all mentions of vizia point scale
...
It does use pixels instead of points.
2022-11-11 16:21:30 +01:00
Robbert van der Helm
a7e425581f
Use CARGO_PKG_VERSION for plugin versions
...
Instead of duplicating this. Means that plugin versions only need to be
updated in the Cargo.toml file.
2022-11-11 03:15:05 +01:00
Robbert van der Helm
6f7780bdeb
Don't register any fonts by default for vizia
...
These now need to be registered individually by the plugin. This saves
on binary size.
2022-11-06 14:05:12 +01:00
Robbert van der Helm
89c2b1f84e
Replace create_vizia_editor_without_theme w/ enum
...
This involves a small breaking change. You can now also completely
disable all of Vizia's theming.
2022-11-06 14:04:55 +01:00
Robbert van der Helm
c980576102
Add an AsyncExecutor for editor GUIs
...
This is decoupled form `GuiContext` as that would require invasive
changes all over the place.
2022-10-22 15:05:39 +02:00
Robbert van der Helm
5ea2377c18
Replace AsyncExecutor with simple closure
...
This makes everything much simpler. The task type is now defined
directly on `Plugin`.
2022-10-22 02:01:03 +02:00
Robbert van der Helm
84f834abb6
Add AsyncExecutor support to ProcessContext
2022-10-22 02:01:03 +02:00
Robbert van der Helm
6ffa23971e
Add AsyncExecutor support to InitContext
2022-10-22 00:21:08 +02:00
Robbert van der Helm
297ad2a83e
Add an AsyncExecutor associated type to Plugin
...
This will make it possible to run background tasks in a type safe way.
Sadly, this does mean that every plugin now needs to define the type
alias and constructor function since Rust does not yet support defaults
for associated types.
2022-10-21 23:52:46 +02:00
Robbert van der Helm
81bdad87b5
Replace custom Params in SC with #[nested]
...
Using the new `id_prefix` attribute. This doesn't break backwards
compatibility.
2022-10-13 01:32:48 +02:00
Robbert van der Helm
727d88c4d7
Add ID renaming superpowers to #[nested(...)]
...
This can now be used for most common use cases where you previously had
to do a manual `Params` implementation, like arrays of parameter objects
and duplicate parameter objects.
2022-10-13 01:28:05 +02:00
Robbert van der Helm
d57003a0e9
Update macOS instructions in plugin readmes
2022-10-09 21:35:25 +02:00
Simon Leiner
0caef90b1a
Fix typos in comments
2022-09-29 15:13:43 +02:00
Robbert van der Helm
a51c359c0b
Fix Spectral Compressor high frequency rolloff
2022-09-15 01:39:16 +02:00
Robbert van der Helm
5ac9c32c19
Fix SC high freq rolloff at 22.05 kHz
...
This prevents the effect from getting brighter as you increase the
sample rate.
2022-09-14 17:47:07 +02:00
Robbert van der Helm
5fa2382c8c
Add a Spectral Compressor todo for rolloff
2022-09-12 02:42:43 +02:00
Robbert van der Helm
c566888fa3
💥 Use interior mutability for parameters
...
Instead of the previous technically-unsound approach. While it wouldn't
cause any issues in practice, it did break Rust's guarantees. That was a
design choice after adding support for editors in NIH-plug, but this is
probably the better long term solution.
The downside is that all uses of `param.value` now need to be changed to
`param.value()`.
2022-09-06 21:57:24 +02:00
Robbert van der Helm
67496f9c79
Default sidechain channel link to 80%
2022-09-04 15:50:49 +02:00
Robbert van der Helm
7cb189b8ef
Disable downwards hi-freq rolloff by default
2022-09-04 15:50:20 +02:00
Robbert van der Helm
08b1e43a15
Apply downwards compression to DC bins
...
In Spectral Compressor. We avoided this because it messes up upwards
compression, but downwards compression is perfectly fine.
2022-09-04 15:07:23 +02:00
Robbert van der Helm
a7bc90050e
Fix the DC gain compensation in SC
2022-09-02 13:52:17 +02:00
Robbert van der Helm
f231be1b1e
Default Spectral Compressor threshold to -12 dB
2022-09-02 13:46:15 +02:00
Robbert van der Helm
50ac2cb2b6
Lower the init value even further
2022-08-20 19:54:15 +02:00
Robbert van der Helm
b3f918dee5
Lower Spectral Compressor envelope init value
2022-08-20 19:40:51 +02:00
Robbert van der Helm
5b021da373
Don't apply output gain to unfiltered DC bins
2022-08-20 16:53:33 +02:00
Robbert van der Helm
14450da80a
Add spectral sidechain compression to SC [2/2]
...
Forgot to stage this in 9550fe0d10
.
2022-08-20 16:45:45 +02:00
Robbert van der Helm
9550fe0d10
Add spectral sidechain compression to SC
2022-08-20 16:37:20 +02:00
Robbert van der Helm
35c6b97ade
Increase Spectral Compressor ratio range
2022-08-20 15:49:03 +02:00
Robbert van der Helm
1a706ea1c7
Rename DEFAULT_NUM_INPUTS and DEFAULT_NUM_OUTPUTS
2022-08-19 14:34:21 +02:00
Robbert van der Helm
f557707b09
Fix typo in 3d3b7e5
2022-07-26 19:19:58 +02:00
Robbert van der Helm
3d3b7e5122
Default SC DC filter to off
2022-07-26 19:07:30 +02:00
Robbert van der Helm
3d6cad54dd
Reset SC envelopes to sqrt(1/2) to prevent pops
2022-07-26 18:51:27 +02:00
Robbert van der Helm
862d475b2b
Prevent divisions by zero in sidechain mode
2022-07-25 16:47:42 +02:00
Robbert van der Helm
f7201a0f58
Implement the sidechain compression mode
2022-07-25 16:47:42 +02:00
Robbert van der Helm
29ebfbeef1
Make SC disclaimer smaller
...
Because there are now more controls.
2022-07-25 16:47:42 +02:00
Robbert van der Helm
6da8756e31
Use unchecked access instead of zip
2022-07-25 16:33:24 +02:00
Robbert van der Helm
dd49bd9e7f
Move knee scaling factor to a function
2022-07-25 16:33:24 +02:00
Robbert van der Helm
49d5ba147a
Move actual compression routines to functions
2022-07-25 16:33:24 +02:00
Robbert van der Helm
2813f3d827
Compute sidechain magnitude spectra when enabled
2022-07-25 16:33:24 +02:00
Robbert van der Helm
1fbcd583a4
Don't apply pink noise curve in sidechain mode
2022-07-25 16:33:24 +02:00
Robbert van der Helm
a799aec7bd
Add (unused) parameters for the compression mode
2022-07-25 16:33:24 +02:00
Robbert van der Helm
4060986b28
Rearrange compressor parameter order
2022-07-25 16:33:24 +02:00
Robbert van der Helm
4f8d5160de
Mark SC parameter struct fields as pub
2022-07-25 14:21:45 +02:00
Robbert van der Helm
e20b10d601
Store SC output gain as linear gain
...
Using the new conversion function.
2022-07-24 20:46:49 +02:00
Robbert van der Helm
42c42dff9b
Never compress the DC bin in SC
...
This just results in more problems than it solves for small window
sizes.
2022-07-24 19:04:53 +02:00
Robbert van der Helm
6b26828839
Default both offsets to 0 dB again
...
Otherwise the UI just looks weird.
2022-07-24 19:01:28 +02:00
Robbert van der Helm
692b1051ad
Avoid compressing DC bin on larger windows
...
Even if the DC filter is disabled. We do want to compress this on
smaller windows as it covers the entire bass range.
2022-07-24 18:39:04 +02:00
Robbert van der Helm
2a464c478c
Default SC global threshold to 0 dBFS
2022-07-24 18:30:20 +02:00
Robbert van der Helm
ce0aa0079c
Slightly lower the threshold parameter
2022-07-24 18:26:57 +02:00
Robbert van der Helm
ce72dc5f03
Fix disabled DC filter behavior
...
This fixes a NaN from taking the logarithm of zero, and the lower bins
are not actually compressed when this option is disabled. This is useful
when using tiny window sizes as the first bin will span quite a chunk of
the spectrum.
2022-07-24 18:25:46 +02:00
Robbert van der Helm
74b33af7d7
Fix DC bin skipping being off by one
2022-07-24 18:00:15 +02:00
Robbert van der Helm
dffc169c99
Skew slope and curve more towards 0
...
Especially positive curve values can get out of hand quick
2022-07-24 17:48:02 +02:00
Robbert van der Helm
d53d03c5cf
Default downwards hi-freq rolloff to 0.25
...
Sort of makes sense to have these two be symmetrical
2022-07-24 17:43:31 +02:00
Robbert van der Helm
22dcbdf4a9
Make the default parameters a bit more gentle
2022-07-24 17:25:58 +02:00
Robbert van der Helm
c06b134e93
Show the upwards parameter on the left
...
It makes more sense this way.
2022-07-24 17:17:28 +02:00
Robbert van der Helm
126cf3b141
Add a disclaimer to the GUI
...
Because there's a good chance things will change later and patches may
not sound exactly the same anymore.
2022-07-24 17:13:09 +02:00
Robbert van der Helm
0b1d9b60db
Also skew the slope parameter
2022-07-24 17:07:35 +02:00
Robbert van der Helm
3fe1769a43
Change the global threshold range
...
This should go lower and it doesn't need to exceed much past 0
dBFS (since full 0 dBFS in the frequency domain will peak pretty hard in
the time domain).
2022-07-24 17:06:20 +02:00
Robbert van der Helm
4a2373b664
Implement upwards compression
2022-07-24 16:56:01 +02:00
Robbert van der Helm
8ca66cf9bb
Move the main threshold up in the list
2022-07-24 16:29:50 +02:00
Robbert van der Helm
455ab0364a
Skew the threshold curve parameter
...
Since the center values will be most interesting useful range.
2022-07-24 16:24:31 +02:00
Robbert van der Helm
068549607d
Add soft-knee downwards compression
2022-07-24 15:58:30 +02:00
Robbert van der Helm
08201d2a87
Compute knee starts and ends
2022-07-24 15:54:58 +02:00
Robbert van der Helm
92f03e768f
Default the rolloff parameters to 0
2022-07-24 15:15:47 +02:00
Robbert van der Helm
b3166e3977
Rearrange Spectral Compressor GUI into 4x4 grid
2022-07-24 15:15:47 +02:00
Robbert van der Helm
4f62ebd2ea
Wrap nested Params structs in Arcs
...
So we can use the generic UIs. Vizia needs these to be 'static.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
4327828e6b
Move the Params implementation to CompressorParams
...
So now CompressorBankParams can just derive Params.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
278ae227a7
Make the Spectral Compressor editor a bit wider
...
Next up is splitting this up in four generic UI panes to make it a bit
easier to use. That was why all of the previous commits moved parameters
around.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
6ae1c55f76
Deduplicate compressors with custom Params impl
...
This now also finally serves as an example on how to do this.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
fa392e61f1
Move attack and release to global parameters
2022-07-24 15:15:47 +02:00
Robbert van der Helm
3c1a1c8f14
Move global parameters to their own struct
...
We'll temporarily split the generic UI into four panes to make it a bit
easier to use.
2022-07-24 15:15:47 +02:00