Robbert van der Helm
990fe33ff7
Add the data needed for the analyzer to Data
2023-03-20 14:57:25 +01:00
Robbert van der Helm
9647f8f3dd
Add triple buffers to share analyzer data in SC
2023-03-19 15:17:25 +01:00
Robbert van der Helm
510bc3f131
Define a struct for SC analyzer data
2023-03-19 13:54:28 +01:00
Robbert van der Helm
66ba8f2872
Default to 16x overlap in Spectral Compressor
2023-03-18 23:28:37 +01:00
Robbert van der Helm
da61acc7b9
Compute SC editor size based on the editor mode
...
Using the new declarative editor size interface.
2023-03-18 14:25:41 +01:00
Robbert van der Helm
c9793c6901
Add an editor mode enum for Spectral Compressor
...
To indicate that the GUI has been expanded.
2023-03-18 14:25:41 +01:00
Robbert van der Helm
a14b4cf61e
Fix years in copyright headers
2023-02-27 00:59:56 +01:00
Robbert van der Helm
338f79e6be
Save and restore Spectral Compressor editor state
2023-02-26 17:35:04 +01:00
Robbert van der Helm
72c43adda6
Mark the Spectral Compressor struct as pub
...
For testing with standalones.
2023-02-23 22:55:15 +01:00
Robbert van der Helm
e8fd18ab80
Completely reword the audio IO layout system
...
Instead of a VST3-style polling function to test if a plugin supports a
certain layout, the plugin now explicitly enumerates the supported
layouts. This aligns better with non-VST3 plugin formats.
2023-02-20 16:57:32 +01:00
Robbert van der Helm
d6184ea06e
Replace VST3 category string with enum slice
...
I've been putting this off for a while, but now is finally the day. We
already did this for CLAP a while back. This is both simpler and less
error prone.
2023-02-01 16:09:03 +01:00
Robbert van der Helm
c8ed795524
Add a SysExMessage type to Plugin
...
This is needed to enable sending and receiving SysEx #54 . Because
associated type defaults still are not stable, this requires every
plugin that doesn't need this to set this to the unit type:
```rust
type SysExMessage = ();
```
2023-01-31 18:18:41 +01:00
Robbert van der Helm
1c80331829
Fix incorrect MIN_OVERLAP_TIMES calculations
...
These aren't actually used which is why this never came up. The
other (similarly unused) constants were calculated correctly.
2023-01-14 00:16:57 +01:00
Robbert van der Helm
27acce3237
Remove the DC filter from Spectral Compressor
...
It's not needed anymore and the behavior is confusing. This was added to
prevent upwards compression and gain increases on DC values from blowing
up. But we no longer do upwards compression on DC bins anyways.
2023-01-08 00:03:38 +01:00
Robbert van der Helm
cb827d18dd
Rename Buffer::len() to Buffer::samples()
...
To reduce ambiguity.
2023-01-05 16:04:38 +01:00
Robbert van der Helm
ab9adaf13e
Update copyright notices for 2023
...
Happy new year!
2023-01-01 18:52:44 +01:00
Robbert van der Helm
82b7426689
Namespace custom CLAP features
2022-11-22 21:09:32 +01:00
Robbert van der Helm
aa7d5195ce
Grab plugin URLs from the Cargo.toml file
2022-11-11 20:26:39 +01:00
Robbert van der Helm
a7e425581f
Use CARGO_PKG_VERSION for plugin versions
...
Instead of duplicating this. Means that plugin versions only need to be
updated in the Cargo.toml file.
2022-11-11 03:15:05 +01:00
Robbert van der Helm
c980576102
Add an AsyncExecutor for editor GUIs
...
This is decoupled form `GuiContext` as that would require invasive
changes all over the place.
2022-10-22 15:05:39 +02:00
Robbert van der Helm
5ea2377c18
Replace AsyncExecutor with simple closure
...
This makes everything much simpler. The task type is now defined
directly on `Plugin`.
2022-10-22 02:01:03 +02:00
Robbert van der Helm
84f834abb6
Add AsyncExecutor support to ProcessContext
2022-10-22 02:01:03 +02:00
Robbert van der Helm
6ffa23971e
Add AsyncExecutor support to InitContext
2022-10-22 00:21:08 +02:00
Robbert van der Helm
297ad2a83e
Add an AsyncExecutor associated type to Plugin
...
This will make it possible to run background tasks in a type safe way.
Sadly, this does mean that every plugin now needs to define the type
alias and constructor function since Rust does not yet support defaults
for associated types.
2022-10-21 23:52:46 +02:00
Robbert van der Helm
727d88c4d7
Add ID renaming superpowers to #[nested(...)]
...
This can now be used for most common use cases where you previously had
to do a manual `Params` implementation, like arrays of parameter objects
and duplicate parameter objects.
2022-10-13 01:28:05 +02:00
Robbert van der Helm
c566888fa3
💥 Use interior mutability for parameters
...
Instead of the previous technically-unsound approach. While it wouldn't
cause any issues in practice, it did break Rust's guarantees. That was a
design choice after adding support for editors in NIH-plug, but this is
probably the better long term solution.
The downside is that all uses of `param.value` now need to be changed to
`param.value()`.
2022-09-06 21:57:24 +02:00
Robbert van der Helm
a7bc90050e
Fix the DC gain compensation in SC
2022-09-02 13:52:17 +02:00
Robbert van der Helm
5b021da373
Don't apply output gain to unfiltered DC bins
2022-08-20 16:53:33 +02:00
Robbert van der Helm
14450da80a
Add spectral sidechain compression to SC [2/2]
...
Forgot to stage this in 9550fe0d10
.
2022-08-20 16:45:45 +02:00
Robbert van der Helm
1a706ea1c7
Rename DEFAULT_NUM_INPUTS and DEFAULT_NUM_OUTPUTS
2022-08-19 14:34:21 +02:00
Robbert van der Helm
f557707b09
Fix typo in 3d3b7e5
2022-07-26 19:19:58 +02:00
Robbert van der Helm
3d3b7e5122
Default SC DC filter to off
2022-07-26 19:07:30 +02:00
Robbert van der Helm
3d6cad54dd
Reset SC envelopes to sqrt(1/2) to prevent pops
2022-07-26 18:51:27 +02:00
Robbert van der Helm
2813f3d827
Compute sidechain magnitude spectra when enabled
2022-07-25 16:33:24 +02:00
Robbert van der Helm
4f8d5160de
Mark SC parameter struct fields as pub
2022-07-25 14:21:45 +02:00
Robbert van der Helm
e20b10d601
Store SC output gain as linear gain
...
Using the new conversion function.
2022-07-24 20:46:49 +02:00
Robbert van der Helm
42c42dff9b
Never compress the DC bin in SC
...
This just results in more problems than it solves for small window
sizes.
2022-07-24 19:04:53 +02:00
Robbert van der Helm
692b1051ad
Avoid compressing DC bin on larger windows
...
Even if the DC filter is disabled. We do want to compress this on
smaller windows as it covers the entire bass range.
2022-07-24 18:39:04 +02:00
Robbert van der Helm
ce72dc5f03
Fix disabled DC filter behavior
...
This fixes a NaN from taking the logarithm of zero, and the lower bins
are not actually compressed when this option is disabled. This is useful
when using tiny window sizes as the first bin will span quite a chunk of
the spectrum.
2022-07-24 18:25:46 +02:00
Robbert van der Helm
74b33af7d7
Fix DC bin skipping being off by one
2022-07-24 18:00:15 +02:00
Robbert van der Helm
4f62ebd2ea
Wrap nested Params structs in Arcs
...
So we can use the generic UIs. Vizia needs these to be 'static.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
6ae1c55f76
Deduplicate compressors with custom Params impl
...
This now also finally serves as an example on how to do this.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
fa392e61f1
Move attack and release to global parameters
2022-07-24 15:15:47 +02:00
Robbert van der Helm
3c1a1c8f14
Move global parameters to their own struct
...
We'll temporarily split the generic UI into four panes to make it a bit
easier to use.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
dae9dc758c
Implement the envelope followers
2022-07-24 15:15:47 +02:00
Robbert van der Helm
147cf3f633
Add a not very functional process function
2022-07-24 15:15:47 +02:00
Robbert van der Helm
482599b351
Compute the thresholds for Spectral Compressor
2022-07-24 15:15:47 +02:00
Robbert van der Helm
fad560ab9f
Precompute 2-log frequencies for the compressors
2022-07-24 15:15:47 +02:00
Robbert van der Helm
e68bb8d632
Add a stub for a compressor bank
...
This is what the compressor data structure will more or less look like.
The thresholds and ratios still need to be split up in their upwards and
downwards counterparts and the callback listeners should be updated
accordingly.
2022-07-24 15:15:47 +02:00
Robbert van der Helm
6f92c81c1b
Add parameters for window size and overlap
2022-07-24 15:15:47 +02:00