Robbert van der Helm
a51c359c0b
Fix Spectral Compressor high frequency rolloff
2022-09-15 01:39:16 +02:00
Robbert van der Helm
5ac9c32c19
Fix SC high freq rolloff at 22.05 kHz
...
This prevents the effect from getting brighter as you increase the
sample rate.
2022-09-14 17:47:07 +02:00
Robbert van der Helm
5fa2382c8c
Add a Spectral Compressor todo for rolloff
2022-09-12 02:42:43 +02:00
Robbert van der Helm
c566888fa3
💥 Use interior mutability for parameters
...
Instead of the previous technically-unsound approach. While it wouldn't
cause any issues in practice, it did break Rust's guarantees. That was a
design choice after adding support for editors in NIH-plug, but this is
probably the better long term solution.
The downside is that all uses of `param.value` now need to be changed to
`param.value()`.
2022-09-06 21:57:24 +02:00
Robbert van der Helm
cd02ebb839
Use less arbitrary decay weights for the gain GUIs
...
This solves the same problem as #27 but in a cleaner way. The previous
commits refactored the smoothing to make it possible to use the
calculations in plugin code to do the same thing as #27 , but then I
realized that that doesn't make much sense since the time to decay into
complete silence isn't very meaningful for this kind of computation.
2022-09-04 19:09:22 +02:00
Robbert van der Helm
67496f9c79
Default sidechain channel link to 80%
2022-09-04 15:50:49 +02:00
Robbert van der Helm
7cb189b8ef
Disable downwards hi-freq rolloff by default
2022-09-04 15:50:20 +02:00
Robbert van der Helm
08b1e43a15
Apply downwards compression to DC bins
...
In Spectral Compressor. We avoided this because it messes up upwards
compression, but downwards compression is perfectly fine.
2022-09-04 15:07:23 +02:00
Robbert van der Helm
a7bc90050e
Fix the DC gain compensation in SC
2022-09-02 13:52:17 +02:00
Robbert van der Helm
f231be1b1e
Default Spectral Compressor threshold to -12 dB
2022-09-02 13:46:15 +02:00
Robbert van der Helm
50ac2cb2b6
Lower the init value even further
2022-08-20 19:54:15 +02:00
Robbert van der Helm
b3f918dee5
Lower Spectral Compressor envelope init value
2022-08-20 19:40:51 +02:00
Robbert van der Helm
5b021da373
Don't apply output gain to unfiltered DC bins
2022-08-20 16:53:33 +02:00
Robbert van der Helm
14450da80a
Add spectral sidechain compression to SC [2/2]
...
Forgot to stage this in 9550fe0d10
2022-08-20 16:45:45 +02:00
Robbert van der Helm
9550fe0d10
Add spectral sidechain compression to SC
2022-08-20 16:37:20 +02:00
Robbert van der Helm
35c6b97ade
Increase Spectral Compressor ratio range
2022-08-20 15:49:03 +02:00
Robbert van der Helm
1a706ea1c7
Rename DEFAULT_NUM_INPUTS and DEFAULT_NUM_OUTPUTS
2022-08-19 14:34:21 +02:00
Robbert van der Helm
743d456e0f
Don't build the gain example with zstd enabled
2022-08-18 19:46:51 +02:00
Robbert van der Helm
1bb1cde913
Add optional Zstandard compression for state
...
This can be particularly useful when using the persistent fields feature
to store JSON or other large textual documents.
2022-08-18 13:55:48 +02:00
Robbert van der Helm
c412d3cca6
Remove debug print
2022-08-18 13:45:13 +02:00
Robbert van der Helm
f557707b09
Fix typo in 3d3b7e5
2022-07-26 19:19:58 +02:00
Robbert van der Helm
3d3b7e5122
Default SC DC filter to off
2022-07-26 19:07:30 +02:00
Robbert van der Helm
3d6cad54dd
Reset SC envelopes to sqrt(1/2) to prevent pops
2022-07-26 18:51:27 +02:00
Robbert van der Helm
862d475b2b
Prevent divisions by zero in sidechain mode
2022-07-25 16:47:42 +02:00
Robbert van der Helm
f7201a0f58
Implement the sidechain compression mode
2022-07-25 16:47:42 +02:00
Robbert van der Helm
29ebfbeef1
Make SC disclaimer smaller
...
Because there are now more controls.
2022-07-25 16:47:42 +02:00
Robbert van der Helm
6da8756e31
Use unchecked access instead of zip
2022-07-25 16:33:24 +02:00
Robbert van der Helm
dd49bd9e7f
Move knee scaling factor to a function
2022-07-25 16:33:24 +02:00
Robbert van der Helm
49d5ba147a
Move actual compression routines to functions
2022-07-25 16:33:24 +02:00
Robbert van der Helm
2813f3d827
Compute sidechain magnitude spectra when enabled
2022-07-25 16:33:24 +02:00
Robbert van der Helm
3ffc2f0604
Change single branch match to if let
2022-07-25 16:33:24 +02:00
Robbert van der Helm
1fbcd583a4
Don't apply pink noise curve in sidechain mode
2022-07-25 16:33:24 +02:00
Robbert van der Helm
a799aec7bd
Add (unused) parameters for the compression mode
2022-07-25 16:33:24 +02:00
Robbert van der Helm
4060986b28
Rearrange compressor parameter order
2022-07-25 16:33:24 +02:00
Robbert van der Helm
4f8d5160de
Mark SC parameter struct fields as pub
2022-07-25 14:21:45 +02:00
Robbert van der Helm
fdbff129f8
Use linear gain params in gain examples
...
Using the new skewed coefficient calculation function for gain ranges
from a couple commits ago.
Closes #18 .
2022-07-24 21:21:13 +02:00
Robbert van der Helm
7b66145e8b
Use correct gain skew factor for Safety Limiter
2022-07-24 20:48:13 +02:00
Robbert van der Helm
e20b10d601
Store SC output gain as linear gain
...
Using the new conversion function.
2022-07-24 20:46:49 +02:00
Robbert van der Helm
42c42dff9b
Never compress the DC bin in SC
...
This just results in more problems than it solves for small window
sizes.
2022-07-24 19:04:53 +02:00
Robbert van der Helm
6b26828839
Default both offsets to 0 dB again
...
Otherwise the UI just looks weird.
2022-07-24 19:01:28 +02:00
Robbert van der Helm
692b1051ad
Avoid compressing DC bin on larger windows
...
Even if the DC filter is disabled. We do want to compress this on
smaller windows as it covers the entire bass range.
2022-07-24 18:39:04 +02:00
Robbert van der Helm
2a464c478c
Default SC global threshold to 0 dBFS
2022-07-24 18:30:20 +02:00
Robbert van der Helm
ce0aa0079c
Slightly lower the threshold parameter
2022-07-24 18:26:57 +02:00
Robbert van der Helm
ce72dc5f03
Fix disabled DC filter behavior
...
This fixes a NaN from taking the logarithm of zero, and the lower bins
are not actually compressed when this option is disabled. This is useful
when using tiny window sizes as the first bin will span quite a chunk of
the spectrum.
2022-07-24 18:25:46 +02:00
Robbert van der Helm
74b33af7d7
Fix DC bin skipping being off by one
2022-07-24 18:00:15 +02:00
Robbert van der Helm
dffc169c99
Skew slope and curve more towards 0
...
Especially positive curve values can get out of hand quick
2022-07-24 17:48:02 +02:00
Robbert van der Helm
d53d03c5cf
Default downwards hi-freq rolloff to 0.25
...
Sort of makes sense to have these two be symmetrical
2022-07-24 17:43:31 +02:00
Robbert van der Helm
22dcbdf4a9
Make the default parameters a bit more gentle
2022-07-24 17:25:58 +02:00
Robbert van der Helm
c06b134e93
Show the upwards parameter on the left
...
It makes more sense this way.
2022-07-24 17:17:28 +02:00
Robbert van der Helm
126cf3b141
Add a disclaimer to the GUI
...
Because there's a good chance things will change later and patches may
not sound exactly the same anymore.
2022-07-24 17:13:09 +02:00
