diff --git a/boards/arduino_nano_connect/src/lib.rs b/boards/arduino_nano_connect/src/lib.rs
index 069f6fd..69ac811 100644
--- a/boards/arduino_nano_connect/src/lib.rs
+++ b/boards/arduino_nano_connect/src/lib.rs
@@ -12,15 +12,15 @@ pub use rp2040_hal::entry;
 /// the board should contain a AT25SF128A flash chip. But
 /// there are [reports] of board with different flash chips,
 /// where the boot loader BOOT_LOADER_AT25SF128A does not
-/// work. 
+/// work.
 ///
 /// Therefore, the generic boot loader is used by default. For a specific
 /// board, the flash performance can be increased by switching to the
 /// matching boot loader.
-/// 
+///
 /// [the Arduino store]: https://store.arduino.cc/products/arduino-nano-rp2040-connect
 /// [reports]: https://github.com/rp-rs/rp-hal/issues/503
-/// 
+///
 #[cfg(feature = "boot2")]
 #[link_section = ".boot2"]
 #[no_mangle]
diff --git a/boards/rp-pico/src/lib.rs b/boards/rp-pico/src/lib.rs
index ac13aa5..7005ff4 100644
--- a/boards/rp-pico/src/lib.rs
+++ b/boards/rp-pico/src/lib.rs
@@ -1,13 +1,13 @@
 #![no_std]
 
 //! A Hardware Abstraction Layer for the Raspberry Pi Pico.
-//! 
+//!
 //! This crate serves as a HAL (Hardware Abstraction Layer) for the Raspberry Pi Pico. Since the Raspberry Pi Pico
-//! is based on the RP2040 chip, it re-exports the [rp2040_hal] crate which contains the tooling to work with the 
+//! is based on the RP2040 chip, it re-exports the [rp2040_hal] crate which contains the tooling to work with the
 //! rp2040 chip.
-//! 
+//!
 //! # Examples:
-//! 
+//!
 //! The following example turns on the onboard LED. Note that most of the logic works through the [rp2040_hal] crate.
 //! ```
 //! #![no_main]
@@ -34,18 +34,17 @@
 //! }
 //! ```
 
-
 pub extern crate rp2040_hal as hal;
 
 #[cfg(feature = "rt")]
 extern crate cortex_m_rt;
 
-/// The `entry` macro declares the starting function to the linker. 
+/// The `entry` macro declares the starting function to the linker.
 /// This is similar to the `main` function in console applications.
-/// 
+///
 /// It is based on the [cortex_m_rt](https://docs.rs/cortex-m-rt/latest/cortex_m_rt/attr.entry.html) crate.
-/// 
-/// # Examples 
+///
+/// # Examples
 /// ```
 /// #![no_std]
 /// #![no_main]