doc: Update readmes to use the new repo's name

This commit is contained in:
Wilfried Chauveau 2023-02-16 07:12:57 +00:00
parent 6c7e728031
commit 456d650909
No known key found for this signature in database
GPG key ID: 0BC4C0B2B0879D6A
21 changed files with 104 additions and 104 deletions

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/adafruit-feather-rp2040 $ cargo build --release --example <name>
rp-hal-boards/boards/adafruit-feather-rp2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/adafruit-feather-rp2040 $ cargo run --release --example <name>
rp-hal-boards/boards/adafruit-feather-rp2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -74,7 +74,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/adafruit-itsy-bitsy-rp2040 $ cargo build --release --example <name>
rp-hal-boards/boards/adafruit-itsy-bitsy-rp2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/adafruit-itsy-bitsy-rp2040 $ cargo run --release --example <name>
rp-hal-boards/boards/adafruit-itsy-bitsy-rp2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -74,7 +74,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/adafruit-kb2040 $ cargo build --release --example <name>
rp-hal-boards/boards/adafruit-kb2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/adafruit-kb2040$ cargo run --release --example <name>
rp-hal-boards/boards/adafruit-kb2040$ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -70,7 +70,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/adafruit-macropad $ cargo build --release --example <name>
rp-hal-boards/boards/adafruit-macropad $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/adafruit-macropad $ cargo run --release --example <name>
rp-hal-boards/boards/adafruit-macropad $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -66,7 +66,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/adafruit-qt-py-rp2040 $ cargo build --release --example <name>
rp-hal-boards/boards/adafruit-qt-py-rp2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/adafruit-qt-py-rp2040 $ cargo run --release --example <name>
rp-hal-boards/boards/adafruit-qt-py-rp2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -70,7 +70,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -26,15 +26,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/adafruit-trinkey-qt2040 $ cargo build --release --example <name>
rp-hal-boards/boards/adafruit-trinkey-qt2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -43,7 +43,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/adafruit-trinkey-qt2040 $ cargo run --release --example <name>
rp-hal-boards/boards/adafruit-trinkey-qt2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -69,7 +69,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -29,15 +29,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/arduino_nano_connect $ cargo build --release --example <name>
rp-hal-boards/boards/arduino_nano_connect $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -46,7 +46,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/arduino_nano_connect $ cargo run --release --example <name>
rp-hal-boards/boards/arduino_nano_connect $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -74,7 +74,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -28,15 +28,15 @@ devices and configure common clocks. See the [examples](./examples) folder for m
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/pimoroni-badger2040 $ cargo build --release --example <name>
rp-hal-boards/boards/pimoroni-badger2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -45,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/pimoroni-badger2040 $ cargo run --release --example <name>
rp-hal-boards/boards/pimoroni-badger2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -72,7 +72,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -28,15 +28,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/pimoroni-pico-explorer $ cargo build --release --example <name>
rp-hal-boards/boards/pimoroni-pico-explorer $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -45,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/pimoroni-pico-explorer $ cargo run --release --example <name>
rp-hal-boards/boards/pimoroni-pico-explorer $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -71,7 +71,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -29,15 +29,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/pimoroni-pico-lipo-16mb $ cargo build --release --example <name>
rp-hal-boards/boards/pimoroni-pico-lipo-16mb $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -46,7 +46,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/pimoroni-pico-lipo-16mb $ cargo run --release --example <name>
rp-hal-boards/boards/pimoroni-pico-lipo-16mb $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -72,7 +72,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/pimoroni-plasma-2040 $ cargo build --release --example <name>
rp-hal-boards/boards/pimoroni-plasma-2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/pimoroni-plasma-2040 $ cargo run --release --example <name>
rp-hal-boards/boards/pimoroni-plasma-2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -76,7 +76,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -28,15 +28,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/pimoroni-servo2040 $ cargo build --release --example <name>
rp-hal-boards/boards/pimoroni-servo2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -45,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/pimoroni-servo2040 $ cargo run --release --example <name>
rp-hal-boards/boards/pimoroni-servo2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -87,7 +87,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/pimoroni-tiny2040 $ cargo build --release --example <name>
rp-hal-boards/boards/pimoroni-tiny2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/pimoroni-tiny2040 $ cargo run --release --example <name>
rp-hal-boards/boards/pimoroni-tiny2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -71,7 +71,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/rp-pico $ cargo build --release --example <name>
rp-hal-boards/boards/rp-pico $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/rp-pico $ cargo run --release --example <name>
rp-hal-boards/boards/rp-pico $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -143,7 +143,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/seeeduino-xiao-rp2040 $ cargo build --release --example <name>
rp-hal-boards/boards/seeeduino-xiao-rp2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/seeeduino-xiao-rp2040 $ cargo run --release --example <name>
rp-hal-boards/boards/seeeduino-xiao-rp2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -72,7 +72,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -30,12 +30,12 @@ devices. See the [examples](./examples) folder for more details.
To compile an example, clone the _rp-hal_ repository and run:
```console
rp-hal/boards/solderparty-rp2040-stamp $ cargo build --release --example <name>
rp-hal-boards/boards/solderparty-rp2040-stamp $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/solderparty-rp2040-stamp $ cargo run --release --example <name>
rp-hal-boards/boards/solderparty-rp2040-stamp $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -70,7 +70,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -28,15 +28,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/sparkfun-pro-micro-rp2040 $ cargo build --release --example <name>
rp-hal-boards/boards/sparkfun-pro-micro-rp2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -45,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/sparkfun-pro-micro-rp2040 $ cargo run --release --example <name>
rp-hal-boards/boards/sparkfun-pro-micro-rp2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -71,7 +71,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -28,15 +28,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/sparkfun-thing-plus-rp2040 $ cargo build --release --example <name>
rp-hal-boards/boards/sparkfun-thing-plus-rp2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -45,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/sparkfun-thing-plus-rp2040 $ cargo run --release --example <name>
rp-hal-boards/boards/sparkfun-thing-plus-rp2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -71,7 +71,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/vcc-gnd-yd-rp2040 $ cargo build --release --example <name>
rp-hal-boards/boards/vcc-gnd-yd-rp2040 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/vcc-gnd-yd-rp2040 $ cargo run --release --example <name>
rp-hal-boards/boards/vcc-gnd-yd-rp2040 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -75,7 +75,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -28,15 +28,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/waveshare-rp2040-lcd-0-96 $ cargo build --release --example <name>
rp-hal-boards/boards/waveshare-rp2040-lcd-0-96 $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -45,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/waveshare-rp2040-lcd-0-96 $ cargo run --release --example <name>
rp-hal-boards/boards/waveshare-rp2040-lcd-0-96 $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -73,7 +73,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!

View file

@ -27,15 +27,15 @@ devices. See the [examples](./examples) folder for more details.
### General Instructions
To compile an example, clone the _rp-hal_ repository and run:
To compile an example, clone the _rp-hal-boards_ repository and run:
```console
rp-hal/boards/waveshare-rp2040-zero $ cargo build --release --example <name>
rp-hal-boards/boards/waveshare-rp2040-zero $ cargo build --release --example <name>
```
You will get an ELF file called
`./target/thumbv6m-none-eabi/release/examples/<name>`, where the `target`
folder is located at the top of the _rp-hal_ repository checkout. Normally
folder is located at the top of the _rp-hal-boards_ repository checkout. Normally
you would also need to specify `--target=thumbv6m-none-eabi` but when
building examples from this git repository, that is set as the default.
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
bootloader mode and run:
```console
rp-hal/boards/waveshare-rp2040-zero $ cargo run --release --example <name>
rp-hal-boards/boards/waveshare-rp2040-zero $ cargo run --release --example <name>
```
If you get an error about not being able to find `elf2uf2-rs`, try:
@ -70,7 +70,7 @@ The steps are:
3. Make some changes to the code or documentation.
4. Commit your Changes (`git commit -m 'Add some AmazingFeature'`)
5. Push to the Feature Branch (`git push origin feature/AmazingFeature`)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal/pulls)
6. Create a [New Pull Request](https://github.com/rp-rs/rp-hal-boards/pulls)
7. An admin will review the Pull Request and discuss any changes that may be required.
8. Once everyone is happy, the Pull Request can be merged by an admin, and your work is part of our project!