fixed typos

README.md

@@ -390,9 +390,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/adafruit-feather-rp2040/README.md

@@ -90,9 +90,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/adafruit-itsy-bitsy-rp2040/README.md

@@ -90,9 +90,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/adafruit-itsy-bitsy-rp2040/examples/adafruit_itsy_bitsy_blinky.rs

@@ -4,7 +4,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/adafruit-kb2040/README.md

@@ -86,9 +86,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/adafruit-macropad/README.md

@@ -82,9 +82,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/adafruit-qt-py-rp2040/README.md

@@ -86,9 +86,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/adafruit-trinkey-qt2040/README.md

@@ -85,9 +85,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/pimoroni-pico-explorer/README.md

@@ -87,9 +87,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/pimoroni-pico-lipo-16mb/README.md

@@ -88,9 +88,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/pimoroni-pico-lipo-16mb/examples/pimoroni_pico_lipo_16mb_blinky.rs

@@ -5,7 +5,7 @@
 //! This will blink an LED attached to GPIO25, which is the pin the Pico Lipo uses
 //! for the on-board LED.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/pimoroni-tiny2040/README.md

@@ -87,9 +87,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/rp-pico/README.md

@@ -129,9 +129,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/rp-pico/examples/pico_blinky.rs

@@ -5,7 +5,7 @@
 //! This will blink an LED attached to GP25, which is the pin the Pico uses for
 //! the on-board LED.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_countdown_blinky.rs

@@ -5,7 +5,7 @@
 //! This will blink an LED attached to GP25, which is the pin the Pico uses for
 //! the on-board LED.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_gpio_in_out.rs

@@ -7,7 +7,7 @@
 //! internally by this example. When the button is pressed, the LED will turn
 //! off.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_i2c_oled_display_ssd1306.rs

@@ -36,7 +36,7 @@
 //!     - (o) connected lines
 //! ```
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_i2c_pio.rs

@@ -6,7 +6,7 @@
 //! using the PIO peripheral as an I2C bus controller.
 //! The pins used for the I2C can be remapped to any other pin available to the PIO0 peripheral.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_pwm_blink.rs

@@ -5,7 +5,7 @@
 //! This will fade in/out the LED attached to GP25, which is the pin the Pico
 //! uses for the on-board LED.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_spi_sd_card.rs

@@ -80,14 +80,14 @@
 //!
 //! If there are 5 different error patterns, all with short blinking pulses:
 //!
-//! - **2 short blink (in a loop)**: Block device could not be aquired, either
+//! - **2 short blink (in a loop)**: Block device could not be acquired, either
 //!   no SD card is present or some electrical problem.
 //! - **3 short blink (in a loop)**: Card size could not be retrieved.
 //! - **4 short blink (in a loop)**: Error getting volume/partition 0.
 //! - **5 short blink (in a loop)**: Error opening root directory.
 //! - **6 short blink (in a loop)**: Could not open file 'O.TST'.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_uart_irq_buffer.rs

@@ -12,7 +12,7 @@
 //! * GPIO 1 - UART RX (in to the RP2040)
 //! * GPIO 25 - An LED we can blink (active high)
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_uart_irq_echo.rs

@@ -10,7 +10,7 @@
 //! * GPIO 1 - UART RX (in to the RP2040)
 //! * GPIO 25 - An LED we can blink (active high)
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_usb_serial.rs

@@ -7,7 +7,7 @@
 //! ASCII characters are converted to upercase, so you can tell it is working
 //! and not just local-echo!
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_usb_serial_interrupt.rs

@@ -7,7 +7,7 @@
 //! ASCII characters are converted to upercase, so you can tell it is working
 //! and not just local-echo!
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/rp-pico/examples/pico_usb_twitchy_mouse.rs

@@ -6,7 +6,7 @@
 //! It generates movement reports which will twitch the cursor up and down by a
 //! few pixels, several times a second.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 //!
 //! This is a port of
 //! https://github.com/atsamd-rs/atsamd/blob/master/boards/itsybitsy_m0/examples/twitching_usb_mouse.rs

boards/rp-pico/examples/pico_ws2812_led.rs

@@ -35,7 +35,7 @@
 //!     - (o) connected lines
 //! ```
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

boards/solderparty-rp2040-stamp/README.md

@@ -86,9 +86,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

boards/sparkfun-pro-micro-rp2040/README.md

@@ -87,9 +87,9 @@ to intervene to uphold that code of conduct.
 ## License
 
 The contents of this repository are dual-licensed under the _MIT OR Apache
-2.0_ License. That means you can chose either the MIT licence or the
-Apache-2.0 licence when you re-use this code. See `MIT` or `APACHE2.0` for more
-information on each specific licence.
+2.0_ License. That means you can chose either the MIT license or the
+Apache-2.0 license when you re-use this code. See `MIT` or `APACHE2.0` for more
+information on each specific license.
 
 Any submissions to this project (e.g. as Pull Requests) must be made available
 under these terms.

rp2040-hal/examples/adc.rs

@@ -5,7 +5,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/blinky.rs

@@ -4,7 +4,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/dht11.rs

@@ -7,7 +7,7 @@
 //!
 //! NOTE: The DHT11 driver only works reliably when compiled in release mode.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/gpio_in_out.rs

@@ -4,7 +4,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/gpio_irq_example.rs

@@ -17,7 +17,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/i2c.rs

@@ -4,7 +4,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/lcd_display.rs

@@ -7,7 +7,7 @@
 //! It drives the LCD by pushing data out of six GPIO pins. It may need to be
 //! adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/multicore_fifo_blink.rs

@@ -7,7 +7,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/pwm_blink.rs

@@ -5,7 +5,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/rom_funcs.rs

@@ -4,7 +4,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/spi.rs

@@ -7,7 +7,7 @@
 //! It may need to be adapted to your particular board layout and/or pin
 //! assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/uart.rs

@@ -6,7 +6,7 @@
 //! It may need to be adapted to your particular board layout and/or pin
 //! assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/examples/watchdog.rs

@@ -4,7 +4,7 @@
 //!
 //! It may need to be adapted to your particular board layout and/or pin assignment.
 //!
-//! See the `Cargo.toml` file for Copyright and licence details.
+//! See the `Cargo.toml` file for Copyright and license details.
 
 #![no_std]
 #![no_main]

rp2040-hal/src/multicore.rs

@@ -43,7 +43,7 @@ extern crate alloc;
 pub enum Error {
     /// Operation is invalid on this core.
     InvalidCore,
-    /// Core was unresposive to commands.
+    /// Core was unresponsive to commands.
     Unresponsive,
 }
 

rp2040-hal/src/pio.rs

@@ -656,7 +656,7 @@ impl<P: PIOExt, SM: StateMachineIndex> StateMachine<(P, SM), Stopped> {
 }
 
 impl<P: PIOExt, SM: StateMachineIndex, State> StateMachine<(P, SM), State> {
-    /// Create a group of state machines, which can be started/stopped synchonously
+    /// Create a group of state machines, which can be started/stopped synchronously
     pub fn with<SM2: StateMachineIndex>(
         self,
         other_sm: StateMachine<(P, SM2), State>,