mirror of
https://github.com/italicsjenga/rp-hal-boards.git
synced 2024-12-24 05:01:31 +11:00
Jonathan 'theJPster' Pallant
GitHub
commit
882d91cd27
18
Cargo.toml
18
Cargo.toml
|
|
@ -2,15 +2,15 @@
|
|||
resolver = "2"
|
||||
members = [
|
||||
"rp2040-hal",
|
||||
"boards/feather_rp2040",
|
||||
"boards/qt_py_rp2040",
|
||||
"boards/itsy_bitsy_rp2040",
|
||||
"boards/kb2040",
|
||||
"boards/pico",
|
||||
"boards/pico_explorer",
|
||||
"boards/pico_lipo_16mb",
|
||||
"boards/adafruit_macropad",
|
||||
"boards/pro_micro_rp2040",
|
||||
"boards/adafruit-feather-rp2040",
|
||||
"boards/adafruit-itsy-bitsy-rp2040",
|
||||
"boards/adafruit-kb2040",
|
||||
"boards/adafruit-macropad",
|
||||
"boards/adafruit-qt-py-rp2040",
|
||||
"boards/pimoroni-pico-explorer",
|
||||
"boards/pimoroni-pico-lipo-16mb",
|
||||
"boards/rp-pico",
|
||||
"boards/sparkfun-pro-micro-rp2040",
|
||||
]
|
||||
|
||||
[patch.'https://github.com/rp-rs/rp-hal.git']
|
||||
|
|
|
|||
102
README.md
102
README.md
|
|
@ -126,18 +126,7 @@ RP2040 chip according to how it is connected up on the Pico.
|
|||
[Raspberry Pi Pico]: https://www.raspberrypi.org/products/raspberry-pi-pico/
|
||||
[pico]: https://github.com/rp-rs/rp-hal/tree/main/boards/pico
|
||||
|
||||
### [adafruit_macropad] - Board Support for the [Adafruit Macropad]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit Macropad] - a 3x4 keyboard and OLED combo board from Adafruit.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Macropad.
|
||||
|
||||
[adafruit_macropad]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_macropad
|
||||
[Adafruit Macropad]: https://www.adafruit.com/product/5128
|
||||
|
||||
### [feather_rp2040] - Board Support for the [Adafruit Feather RP2040]
|
||||
### [adafruit-feather-rp2040] - Board Support for the [Adafruit Feather RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit Feather RP2040] - a Feather form-factor RP2040 board from Adafruit.
|
||||
|
|
@ -146,9 +135,51 @@ This crate includes the [rp2040-hal], but also configures each pin of the
|
|||
RP2040 chip according to how it is connected up on the Feather RP2040.
|
||||
|
||||
[Adafruit Feather RP2040]: https://www.adafruit.com/product/4884
|
||||
[feather_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/feather_rp2040
|
||||
[adafruit-feather-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_feather_rp2040
|
||||
|
||||
### [pico_explorer] - Board Support for the [Pimoroni Pico Explorer]
|
||||
### [adafruit-itsy-bitsy-rp2040] - Board Support for the [Adafruit ItsyBitsy RP2040]
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit ItsyBitsy RP2040] - an RP2040 board in the ItsyBitsy family.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the ItsyBitsy RP2040.
|
||||
|
||||
[Adafruit ItsyBitsy RP2040]: https://www.adafruit.com/product/4888
|
||||
[adafruit-itsy-bitsy-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_itsy_bitsy_rp2040
|
||||
|
||||
### [adafruit-kb2040] - Board Support for the [Adafruit adafruit-kb2040]
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit adafruit-kb2040] - an Arduino Pro Micro-shaped board for keyboards.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the adafruit-kb2040.
|
||||
|
||||
[Adafruit adafruit-kb2040]: https://www.adafruit.com/product/5302
|
||||
[adafruit-kb2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-kb2040
|
||||
|
||||
### [adafruit-macropad] - Board Support for the [Adafruit Macropad]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit Macropad] - a 3x4 keyboard and OLED combo board from Adafruit.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Macropad.
|
||||
|
||||
[adafruit-macropad]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_macropad
|
||||
[Adafruit Macropad]: https://www.adafruit.com/product/5128
|
||||
|
||||
### [adafruit-qt-py-rp2040] - Board Support for the [Adafruit QT Py RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit QT Py RP2040] - an extremely small form-factor RP2040 board from Adafruit.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Feather RP2040.
|
||||
|
||||
[Adafruit QT Py RP2040]: https://www.adafruit.com/product/4900
|
||||
[adafruit-qt-py-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_qt_py_rp2040
|
||||
|
||||
### [pimoroni-pico-explorer] - Board Support for the [Pimoroni Pico Explorer]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Pimoroni Pico Explorer] - a board featuring a small LCD screen, a
|
||||
|
|
@ -157,10 +188,10 @@ breadboard and some breakout headers.
|
|||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Pico Explorer.
|
||||
|
||||
[Pimoroni Pico Explorer]: https://shop.pimoroni.com/products/pico-explorer-base
|
||||
[pico_explorer]: https://github.com/rp-rs/rp-hal/tree/main/boards/pico_explorer
|
||||
[Pimoroni Pico Explorer]: https://shop.pimoroni.com/products/pimoroni-pico-explorer-base
|
||||
[pimoroni-pico-explorer]: https://github.com/rp-rs/rp-hal/tree/main/boards/pimoroni_pico_explorer
|
||||
|
||||
### [pico_lipo_16mb] - Board Support for the [Pimoroni Pico Lipo 16MB]
|
||||
### [pimoroni-pico-lipo-16mb] - Board Support for the [Pimoroni Pico Lipo 16MB]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Pimoroni Pico Lipo 16MB] - a board with USB-C, STEMMA QT/Qwiic connectors,
|
||||
|
|
@ -173,9 +204,9 @@ Note that if you use this crate the compiler will expect the full 16MB flash
|
|||
space, and so it may not work if you only have the 4MB variant.
|
||||
|
||||
[Pimoroni Pico Lipo 16MB]: https://shop.pimoroni.com/products/pimoroni-pico-lipo?variant=39335427080275
|
||||
[pico_lipo_16mb]: https://github.com/rp-rs/rp-hal/tree/main/boards/pico_lipo_16mb
|
||||
[pimoroni-pico-lipo-16mb]: https://github.com/rp-rs/rp-hal/tree/main/boards/pimoroni_pico_lipo_16mb
|
||||
|
||||
### [pro_micro_rp2040] - Board Support for the [Sparkfun Pro Micro RP2040]
|
||||
### [sparkfun-pro-micro-rp2040] - Board Support for the [Sparkfun Pro Micro RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Sparkfun Pro Micro RP2040] - a smaller RP2040 board with USB-C and a WS2812B addressable LED.
|
||||
|
|
@ -184,38 +215,7 @@ This crate includes the [rp2040-hal], but also configures each pin of the
|
|||
RP2040 chip according to how it is connected up on the Pro Micro RP2040.
|
||||
|
||||
[Sparkfun Pro Micro RP2040]: https://www.sparkfun.com/products/18288
|
||||
[pro_micro_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/pro_micro_rp2040
|
||||
|
||||
### [qt_py_rp2040] - Board Support for the [Adafruit QT Py RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit QT Py RP2040] - an extremely small form-factor RP2040 board from Adafruit.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Feather RP2040.
|
||||
|
||||
[Adafruit QT Py RP2040]: https://www.adafruit.com/product/4900
|
||||
[qt_py_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/qt_py_rp2040
|
||||
|
||||
### [itsy_bitsy_rp2040] - Board Support for the [Adafruit ItsyBitsy RP2040]
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit ItsyBitsy RP2040] - an RP2040 board in the ItsyBitsy family.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the ItsyBitsy RP2040.
|
||||
|
||||
[Adafruit ItsyBitsy RP2040]: https://www.adafruit.com/product/4888
|
||||
[itsy_bitsy_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/itsy_bitsy_rp2040
|
||||
|
||||
### [kb2040] - Board Support for the [Adafruit KB2040]
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit KB2040] - an Arduino Pro Micro-shaped board for keyboards.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the KB2040.
|
||||
|
||||
[Adafruit KB2040]: https://www.adafruit.com/product/5302
|
||||
[kb2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/kb2040
|
||||
[sparkfun-pro-micro-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/sparkfun_pro_micro_rp2040
|
||||
|
||||
<!-- PROGRAMMING -->
|
||||
## Programming
|
||||
|
|
|
|||
23
boards/adafruit-feather-rp2040/CHANGELOG.md
Normal file
23
boards/adafruit-feather-rp2040/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/adafruit-feather-rp2040-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/adafruit-feather-rp2040-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "feather_rp2040"
|
||||
name = "adafruit-feather-rp2040"
|
||||
version = "0.1.0"
|
||||
authors = ["Andrea Nall <anall@andreanal.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/feather_rp2040"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-feather-rp2040"
|
||||
description = "Board Support Package for the Adafruit Feather RP2040"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [feather_rp2040] - Board Support for the [Adafruit Feather RP2040]
|
||||
# [adafruit-feather-rp2040] - Board Support for the [Adafruit Feather RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit Feather RP2040] - a Feather form-factor RP2040 board from Adafruit.
|
||||
|
|
@ -7,7 +7,7 @@ This crate includes the [rp2040-hal], but also configures each pin of the
|
|||
RP2040 chip according to how it is connected up on the Feather.
|
||||
|
||||
[Adafruit Feather RP2040]: https://www.adafruit.com/product/4884
|
||||
[feather_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/feather_rp2040
|
||||
[adafruit-feather-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-feather-rp2040
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
||||
|
|
@ -16,10 +16,10 @@ RP2040 chip according to how it is connected up on the Feather.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
feather_rp2040 = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
adafruit-feather-rp2040 = "0.1.0"
|
||||
```
|
||||
|
||||
In your program, you will need to call `feather_rp2040::Pins::new` to create
|
||||
In your program, you will need to call `adafruit_feather_rp2040::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -30,7 +30,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/feather_rp2040 $ cargo build --release --example <name>
|
||||
rp-hal/boards/adafruit-feather-rp2040 $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/feather_rp2040 $ cargo run --release --example <name>
|
||||
rp-hal/boards/adafruit-feather-rp2040 $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -53,11 +53,11 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [feather_blinky](./examples/feather_blinky.rs)
|
||||
### [adafruit_feather_blinky](./examples/adafruit_feather_blinky.rs)
|
||||
|
||||
Flashes the Feather's onboard LED on and off.
|
||||
|
||||
### [feather_neopixel_rainbow](./examples/feather_neopixel_rainbow.rs)
|
||||
### [adafruit_feather_neopixel_rainbow](./examples/adafruit_feather_neopixel_rainbow.rs)
|
||||
|
||||
Flows smoothly through various colors on the Feather's onboard NeoPixel LED.
|
||||
|
||||
|
|
@ -4,10 +4,7 @@
|
|||
#![no_std]
|
||||
#![no_main]
|
||||
|
||||
use cortex_m_rt::entry;
|
||||
use embedded_hal::digital::v2::OutputPin;
|
||||
use embedded_time::rate::*;
|
||||
use feather_rp2040::{
|
||||
use adafruit_feather_rp2040::{
|
||||
hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
pac,
|
||||
|
|
@ -16,6 +13,9 @@ use feather_rp2040::{
|
|||
},
|
||||
Pins, XOSC_CRYSTAL_FREQ,
|
||||
};
|
||||
use cortex_m_rt::entry;
|
||||
use embedded_hal::digital::v2::OutputPin;
|
||||
use embedded_time::rate::*;
|
||||
use panic_halt as _;
|
||||
|
||||
#[entry]
|
||||
|
|
@ -6,11 +6,7 @@
|
|||
#![no_std]
|
||||
#![no_main]
|
||||
|
||||
use core::iter::once;
|
||||
use cortex_m_rt::entry;
|
||||
use embedded_hal::timer::CountDown;
|
||||
use embedded_time::duration::Extensions;
|
||||
use feather_rp2040::{
|
||||
use adafruit_feather_rp2040::{
|
||||
hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
pac,
|
||||
|
|
@ -21,6 +17,10 @@ use feather_rp2040::{
|
|||
},
|
||||
Pins, XOSC_CRYSTAL_FREQ,
|
||||
};
|
||||
use core::iter::once;
|
||||
use cortex_m_rt::entry;
|
||||
use embedded_hal::timer::CountDown;
|
||||
use embedded_time::duration::Extensions;
|
||||
use panic_halt as _;
|
||||
use smart_leds::{brightness, SmartLedsWrite, RGB8};
|
||||
use ws2812_pio::Ws2812;
|
||||
23
boards/adafruit-itsy-bitsy-rp2040/CHANGELOG.md
Normal file
23
boards/adafruit-itsy-bitsy-rp2040/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/adafruit-itsy-bitsy-rp2040-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/adafruit-itsy-bitsy-rp2040-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "itsy_bitsy_rp2040"
|
||||
name = "adafruit-itsy-bitsy-rp2040"
|
||||
version = "0.1.0"
|
||||
authors = ["Andrew Christiansen <andrewtaylorchristiansen@gmail.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/itsy_bitsy_rp2040"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_itsy_bitsy_rp2040"
|
||||
description = "Board Support Package for the Adafruit ItsyBitsy RP2040"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [itsy_bitsy_rp2040] - Board Support for the [Adafruit ItsyBitsy RP2040]
|
||||
# [adafruit-itsy-bitsy-rp2040] - Board Support for the [Adafruit ItsyBitsy RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit ItsyBitsy RP2040] - an RP2040 board in the Itsy family from Adafruit.
|
||||
|
|
@ -7,7 +7,7 @@ This crate includes the [rp2040-hal], but also configures each pin of the
|
|||
RP2040 chip according to how it is connected up on the ItsyBitsy RP2040.
|
||||
|
||||
[Adafruit ItsyBitsy RP2040]: https://www.adafruit.com/product/4888
|
||||
[itsy_bitsy_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/itsy_bitsy_rp2040
|
||||
[adafruit-itsy-bitsy-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-itsy-bitsy-rp2040
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
||||
|
|
@ -16,10 +16,10 @@ RP2040 chip according to how it is connected up on the ItsyBitsy RP2040.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
itsy_bitsy_rp2040 = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
adafruit-itsy-bitsy-rp2040 = "0.1.0"
|
||||
```
|
||||
|
||||
In your program, you will need to call `itsy_bitsy_rp2040::Pins::new` to create
|
||||
In your program, you will need to call `adafruit_itsy_bitsy_rp2040::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -30,7 +30,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/itsy_bitsy_rp2040 $ cargo build --release --example <name>
|
||||
rp-hal/boards/adafruit-itsy-bitsy-rp2040 $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/itsy_bitsy_rp2040 $ cargo run --release --example <name>
|
||||
rp-hal/boards/adafruit-itsy-bitsy-rp2040 $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -53,7 +53,11 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [itsy_bitsy_rainbow](./examples/itsy_bitsy_rainbow.rs)
|
||||
### [adafruit_itsy_bitsy_blinky](./examples/adafruit_itsy_bitsy_blinky.rs)
|
||||
|
||||
Blink an LED on and off.
|
||||
|
||||
### [adafruit_itsy_bitsy_rainbow](./examples/adafruit_itsy_bitsy_rainbow.rs)
|
||||
|
||||
Continuously changes the color of the ItsyBitsy's onboard Neopixel.
|
||||
|
||||
|
|
@ -20,7 +20,7 @@ use panic_halt as _;
|
|||
use embedded_hal::digital::v2::OutputPin;
|
||||
use embedded_time::fixed_point::FixedPoint;
|
||||
|
||||
use itsy_bitsy_rp2040::{
|
||||
use adafruit_itsy_bitsy_rp2040::{
|
||||
hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
pac,
|
||||
|
|
@ -11,7 +11,7 @@ use panic_halt as _;
|
|||
use smart_leds::{brightness, SmartLedsWrite, RGB8};
|
||||
use ws2812_pio::Ws2812;
|
||||
|
||||
use itsy_bitsy_rp2040::{
|
||||
use adafruit_itsy_bitsy_rp2040::{
|
||||
hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
pac,
|
||||
23
boards/adafruit-kb2040/CHANGELOG.md
Normal file
23
boards/adafruit-kb2040/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/adafruit-kb2040-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/adafruit-kb2040-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "kb2040"
|
||||
name = "adafruit-kb2040"
|
||||
version = "0.1.0"
|
||||
authors = ["Andrew Christiansen <andrewtaylorchristiansen@gmail.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/kb2040"
|
||||
description = "Board Support Package for the Adafruit KB2040"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-kb2040"
|
||||
description = "Board Support Package for the Adafruit adafruit-kb2040"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [kb2040] - Board Support for the [Adafruit KB2040]
|
||||
# [adafruit-kb2040] - Board Support for the [Adafruit KB2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Adafruit KB2040] - an Arduino Pro Micro-shaped board for keyboards.
|
||||
|
|
@ -7,7 +7,7 @@ This crate includes the [rp2040-hal], but also configures each pin of the
|
|||
RP2040 chip according to how it is connected up on the KB2040.
|
||||
|
||||
[Adafruit KB2040]: https://www.adafruit.com/product/5302
|
||||
[kb2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/kb2040
|
||||
[adafruit-kb2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-kb2040
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
||||
|
|
@ -16,10 +16,10 @@ RP2040 chip according to how it is connected up on the KB2040.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
kb2040 = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
adafruit-kb2040 = "0.1.0"
|
||||
```
|
||||
|
||||
In your program, you will need to call `kb2040::Pins::new` to create
|
||||
In your program, you will need to call `adafruit-kb2040::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -30,7 +30,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/kb2040 $ cargo build --release --example <name>
|
||||
rp-hal/boards/adafruit-kb2040 $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/kb2040$ cargo run --release --example <name>
|
||||
rp-hal/boards/adafruit-kb2040$ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -53,7 +53,7 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [Rainbow](./examples/kb2040_rainbow.rs)
|
||||
### [Rainbow](./examples/adafruit_kb2040_rainbow.rs)
|
||||
|
||||
This example will display a colour-wheel rainbow effect on the on-board LED.
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ use embedded_hal::timer::CountDown;
|
|||
use embedded_time::duration::Extensions;
|
||||
use panic_halt as _;
|
||||
|
||||
use kb2040::{
|
||||
use adafruit_kb2040::{
|
||||
hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
pac,
|
||||
|
|
@ -62,7 +62,7 @@ fn main() -> ! {
|
|||
|
||||
let sio = Sio::new(pac.SIO);
|
||||
|
||||
let pins = kb2040::Pins::new(
|
||||
let pins = adafruit_kb2040::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
23
boards/adafruit-macropad/CHANGELOG.md
Normal file
23
boards/adafruit-macropad/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/adafruit-macropad-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/adafruit-macropad-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "adafruit_macropad"
|
||||
name = "adafruit-macropad"
|
||||
version = "0.1.0"
|
||||
authors = ["Andrea Nall <anall@andreanal.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/adafruit_macropad"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_macropad"
|
||||
description = "Board Support Package for the Adafruit Macropad"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [adafruit_macropad] - Board Support for the [Adafruit Macropad]
|
||||
# [adafruit-macropad] - Board Support for the [Adafruit Macropad]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit Macropad] - a 3x4 keyboard and OLED combo board from Adafruit.
|
||||
|
|
@ -6,7 +6,7 @@ an [Adafruit Macropad] - a 3x4 keyboard and OLED combo board from Adafruit.
|
|||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Feather.
|
||||
|
||||
[adafruit_macropad]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit_macropad
|
||||
[adafruit-macropad]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-macropad
|
||||
[Adafruit Macropad]: https://www.adafruit.com/product/5128
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
|
@ -16,7 +16,7 @@ RP2040 chip according to how it is connected up on the Feather.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
adafruit_macropad = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
adafruit-macropad = "0.1.0"
|
||||
```
|
||||
|
||||
In your program, you will need to call `adafruit_macropad::Pins::new` to create
|
||||
|
|
@ -30,7 +30,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/adafruit_macropad $ cargo build --release --example <name>
|
||||
rp-hal/boards/adafruit-macropad $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/adafruit_macropad $ cargo run --release --example <name>
|
||||
rp-hal/boards/adafruit-macropad $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -53,10 +53,6 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [feather_blinky](./examples/feather_blinky.rs)
|
||||
|
||||
Flashes the Feather's on-board LED on and off.
|
||||
|
||||
## Contributing
|
||||
|
||||
Contributions are what make the open source community such an amazing place to
|
||||
23
boards/adafruit-qt-py-rp2040/CHANGELOG.md
Normal file
23
boards/adafruit-qt-py-rp2040/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/adafruit-qt-py-rp2040-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/adafruit-qt-py-rp2040-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "qt_py_rp2040"
|
||||
name = "adafruit-qt-py-rp2040"
|
||||
version = "0.1.0"
|
||||
authors = ["Stephen Onnen <stephen.onnen@gmail.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/qt_py_rp2040"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-qt-py-rp2040"
|
||||
description = "Board Support Package for the Adafruit QT Py RP2040"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [qt_py_rp2040] - Board Support for the [Adafruit QT Py RP2040]
|
||||
# [adafruit-qt-py-rp2040] - Board Support for the [Adafruit QT Py RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
an [Adafruit QT Py RP2040] - an extremely small form-factor RP2040 board from Adafruit.
|
||||
|
|
@ -7,7 +7,7 @@ This crate includes the [rp2040-hal], but also configures each pin of the
|
|||
RP2040 chip according to how it is connected up on the QT Py.
|
||||
|
||||
[Adafruit QT Py RP2040]: https://www.adafruit.com/product/4900
|
||||
[qt_py_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/qt_py_rp2040
|
||||
[adafruit-qt-py-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/adafruit-qt-py-rp2040
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
||||
|
|
@ -16,10 +16,10 @@ RP2040 chip according to how it is connected up on the QT Py.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
qt_py_rp2040 = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
adafruit-qt-py-rp2040 = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
```
|
||||
|
||||
In your program, you will need to call `qt_py_rp2040::Pins::new` to create
|
||||
In your program, you will need to call `adafruit_qt_py_rp2040::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -30,7 +30,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/qt_py_rp2040 $ cargo build --release --example <name>
|
||||
rp-hal/boards/adafruit-qt-py-rp2040 $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/qt_py_rp2040 $ cargo run --release --example <name>
|
||||
rp-hal/boards/adafruit-qt-py-rp2040 $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -53,7 +53,7 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [qt_py_rainbow](./examples/qt_py_rainbow.rs)
|
||||
### [adafruit_qt_py_rp2040_rainbow](./examples/adafruit_qt_py_rp2040_rainbow.rs)
|
||||
|
||||
Continuously changes the color of the QT Py's onboard Neopixel.
|
||||
|
||||
|
|
@ -11,7 +11,7 @@ use panic_halt as _;
|
|||
use smart_leds::{brightness, SmartLedsWrite, RGB8};
|
||||
use ws2812_pio::Ws2812;
|
||||
|
||||
use qt_py_rp2040::{
|
||||
use adafruit_qt_py_rp2040::{
|
||||
hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
pac,
|
||||
|
|
@ -1,47 +0,0 @@
|
|||
//! I2C Controller demo
|
||||
//!
|
||||
//! This module implements a demonstration of an I2C controller sending read & write requests to a
|
||||
//! peripheral.
|
||||
//! This demo takes advandage of rust's async.await support to run read & write operation while
|
||||
//! serving those request from an independant context.
|
||||
|
||||
use super::ADDRESS;
|
||||
use core::ops::Deref;
|
||||
use rp2040_hal::i2c::I2C;
|
||||
use rp2040_hal::pac::i2c0::RegisterBlock as I2CBlock;
|
||||
|
||||
use embassy_traits::i2c::I2c;
|
||||
|
||||
/// Controller demo
|
||||
pub async fn run_demo<Block, Pins>(i2c: &mut I2C<Block, Pins>) -> Result<(), rp2040_hal::i2c::Error>
|
||||
where
|
||||
Block: Deref<Target = I2CBlock>,
|
||||
{
|
||||
let mut tx_filler = 0;
|
||||
let mut tx = [0u8; 24];
|
||||
let mut rx = [0u8; 24];
|
||||
|
||||
i2c.read(ADDRESS, &mut rx).await?;
|
||||
rx.iter()
|
||||
.cloned()
|
||||
.zip(0x80..)
|
||||
.for_each(|(a, b)| assert_eq!(a, b));
|
||||
|
||||
tx.iter_mut().for_each(|b| {
|
||||
*b = tx_filler;
|
||||
tx_filler += 1;
|
||||
});
|
||||
|
||||
i2c.write_read(ADDRESS, &tx, &mut rx).await?;
|
||||
rx.iter()
|
||||
.cloned()
|
||||
.zip(0x80 + 24..) // follows the inital read
|
||||
.for_each(|(a, b)| assert_eq!(a, b));
|
||||
|
||||
tx.iter_mut().for_each(|b| {
|
||||
*b = tx_filler;
|
||||
tx_filler += 1;
|
||||
});
|
||||
i2c.write(ADDRESS, &tx).await?;
|
||||
Ok(())
|
||||
}
|
||||
|
|
@ -1,119 +0,0 @@
|
|||
//! I2C controller and I2C peripheral async demo.
|
||||
//!
|
||||
//! This example demonstrates use of both I2C peripherals (I2C0 and I2C1) at the same time on a single Pico using [Embassy](https://github.com/embassy-rs/embassy), an async executor.
|
||||
//!
|
||||
//! Each peripheral is passed to an async task, which allows them to operate independently of each other:
|
||||
//! - The controller task (ctrl_demo) uses I2C0. It calls the demo controller code in `controller.rs`
|
||||
//! - The peripheral task (prph_demo) uses I2C1. It calls the demo peripheral code in `peripheral.rs`
|
||||
//!
|
||||
//! ### Wiring notes:
|
||||
//!
|
||||
//! I2C0 uses pin `GP0` for `SDA`, and `GP1` for `SCL`.
|
||||
//!
|
||||
//! I2C1 uses `GP2` for `SDA`, and `GP3` for `SCL`.
|
||||
//!
|
||||
//! For this demo to function you must connect the `SDA` signals (`GP0` and `GP2`) to each other using wires.
|
||||
//! You must also connect the `SCL` signals (`GP1` and `GP3`) to each other.
|
||||
//!
|
||||
//! A pull up resistor (to 3.3V, which is available on pin `36`) is required on SCL & SDA lines in order to reach the expected 1MHz. Although it
|
||||
//! depends on the hardware context (wire length, impedance & capacitance), a typical value of 2KOhm
|
||||
//! should generally work fine.
|
||||
//!
|
||||
//! If you do not connect the resistor and instead use the internal pull-ups on the I2C pins, you may need to lower the I2C frequency to avoid transmission errors.
|
||||
#![no_std]
|
||||
#![no_main]
|
||||
#![feature(type_alias_impl_trait)]
|
||||
|
||||
use embassy::{executor::Executor, util::Forever};
|
||||
use embedded_time::rate::Extensions;
|
||||
use hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
gpio::{bank0, FunctionI2C, Pin},
|
||||
i2c::{peripheral::I2CPeripheralEventIterator, I2C},
|
||||
pac,
|
||||
watchdog::Watchdog,
|
||||
Sio,
|
||||
};
|
||||
use pico::{hal, Pins, XOSC_CRYSTAL_FREQ};
|
||||
|
||||
use panic_halt as _;
|
||||
|
||||
mod controller;
|
||||
mod peripheral;
|
||||
|
||||
const ADDRESS: u16 = 0x55;
|
||||
|
||||
#[embassy::task]
|
||||
async fn ctrl_demo(
|
||||
mut i2c: I2C<
|
||||
pac::I2C0,
|
||||
(
|
||||
Pin<bank0::Gpio0, FunctionI2C>,
|
||||
Pin<bank0::Gpio1, FunctionI2C>,
|
||||
),
|
||||
>,
|
||||
) {
|
||||
controller::run_demo(&mut i2c).await.expect("Demo failed")
|
||||
}
|
||||
|
||||
#[embassy::task]
|
||||
async fn prph_demo(
|
||||
mut i2c: I2CPeripheralEventIterator<
|
||||
pac::I2C1,
|
||||
(
|
||||
Pin<bank0::Gpio2, FunctionI2C>,
|
||||
Pin<bank0::Gpio3, FunctionI2C>,
|
||||
),
|
||||
>,
|
||||
) {
|
||||
peripheral::run_demo(&mut i2c).await.expect("Demo failed")
|
||||
}
|
||||
|
||||
#[cortex_m_rt::entry]
|
||||
fn main() -> ! {
|
||||
let mut pac = pac::Peripherals::take().unwrap();
|
||||
let mut watchdog = Watchdog::new(pac.WATCHDOG);
|
||||
|
||||
let clocks = init_clocks_and_plls(
|
||||
XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
pac.PLL_USB,
|
||||
&mut pac.RESETS,
|
||||
&mut watchdog,
|
||||
)
|
||||
.ok()
|
||||
.unwrap();
|
||||
|
||||
let pins = Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
Sio::new(pac.SIO).gpio_bank0,
|
||||
&mut pac.RESETS,
|
||||
);
|
||||
let i2c0 = I2C::new_controller(
|
||||
pac.I2C0,
|
||||
pins.gpio0.into_mode(),
|
||||
pins.gpio1.into_mode(),
|
||||
1_000.kHz(),
|
||||
&mut pac.RESETS,
|
||||
clocks.system_clock.freq(),
|
||||
);
|
||||
|
||||
let i2c1 = I2C::new_peripheral_event_iterator(
|
||||
pac.I2C1,
|
||||
pins.gpio2.into_mode(),
|
||||
pins.gpio3.into_mode(),
|
||||
&mut pac.RESETS,
|
||||
ADDRESS,
|
||||
);
|
||||
|
||||
static EXECUTOR: Forever<Executor> = Forever::new();
|
||||
let executor = EXECUTOR.put(Executor::new());
|
||||
|
||||
executor.run(|spawner| {
|
||||
spawner.spawn(ctrl_demo(i2c0)).unwrap();
|
||||
spawner.spawn(prph_demo(i2c1)).unwrap();
|
||||
});
|
||||
}
|
||||
|
|
@ -1,95 +0,0 @@
|
|||
//! I2C Peripheral demo
|
||||
//!
|
||||
//! This module implements a state machine serving the I2C requests from the controller in this
|
||||
//! demo. In a real-life application the state machine may not need to be validated as thoroughly
|
||||
//! demonstrated here.
|
||||
|
||||
use core::ops::Deref;
|
||||
use rp2040_hal::i2c::peripheral::I2CEvent;
|
||||
use rp2040_hal::i2c::peripheral::I2CPeripheralEventIterator;
|
||||
use rp2040_hal::pac::i2c0::RegisterBlock as I2CBlock;
|
||||
|
||||
pub async fn run_demo<Block, Pins>(
|
||||
i2c: &mut I2CPeripheralEventIterator<Block, Pins>,
|
||||
) -> Result<(), rp2040_hal::i2c::Error>
|
||||
where
|
||||
Block: Deref<Target = I2CBlock>,
|
||||
{
|
||||
let mut expected_value = 0..;
|
||||
let mut output = 128;
|
||||
|
||||
#[derive(Debug, PartialEq)]
|
||||
enum Stage {
|
||||
Idle0,
|
||||
FirstRead,
|
||||
Idle1,
|
||||
FirstWrite,
|
||||
SecondRead,
|
||||
Idle2,
|
||||
SecondWrite,
|
||||
Done,
|
||||
}
|
||||
let mut stage = Stage::Idle0;
|
||||
|
||||
while stage != Stage::Done {
|
||||
let ev = futures::future::poll_fn(|cx| {
|
||||
cx.waker().wake_by_ref();
|
||||
i2c.next()
|
||||
.map(core::task::Poll::Ready)
|
||||
.unwrap_or(core::task::Poll::Pending)
|
||||
})
|
||||
.await;
|
||||
match ev {
|
||||
I2CEvent::Start => {
|
||||
stage = match stage {
|
||||
Stage::Idle0 => Stage::FirstRead,
|
||||
Stage::Idle1 => Stage::FirstWrite,
|
||||
Stage::Idle2 => Stage::SecondWrite,
|
||||
_ => panic!("Unexpected {:?} while in {:?}", ev, stage),
|
||||
}
|
||||
}
|
||||
I2CEvent::TransferRead => {
|
||||
if stage != Stage::FirstRead && stage != Stage::SecondRead {
|
||||
panic!("Unexpected {:?} while in {:?}", ev, stage);
|
||||
}
|
||||
|
||||
i2c.write(&[output, output + 1, output + 2, output + 3]);
|
||||
output += 4;
|
||||
}
|
||||
I2CEvent::TransferWrite => {
|
||||
if stage != Stage::FirstWrite && stage != Stage::SecondWrite {
|
||||
panic!("Unexpected {:?} while in {:?}", ev, stage);
|
||||
}
|
||||
|
||||
let mut buf = [0; 16];
|
||||
loop {
|
||||
let read = i2c.read(&mut buf);
|
||||
if read == 0 {
|
||||
break;
|
||||
}
|
||||
|
||||
buf.iter()
|
||||
.take(read)
|
||||
.cloned()
|
||||
.zip(&mut expected_value)
|
||||
.for_each(|(a, b)| assert_eq!(a, b));
|
||||
}
|
||||
}
|
||||
I2CEvent::Stop => {
|
||||
stage = match stage {
|
||||
Stage::FirstRead => Stage::Idle1,
|
||||
Stage::SecondRead => Stage::Idle2,
|
||||
Stage::SecondWrite => Stage::Done,
|
||||
_ => panic!("Unexpected {:?} while in {:?}", ev, stage),
|
||||
}
|
||||
}
|
||||
I2CEvent::Restart => {
|
||||
stage = match stage {
|
||||
Stage::FirstWrite => Stage::SecondRead,
|
||||
_ => panic!("Unexpected {:?} while in {:?}", ev, stage),
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Ok(())
|
||||
}
|
||||
23
boards/pimoroni-pico-explorer/CHANGELOG.md
Normal file
23
boards/pimoroni-pico-explorer/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/pimoroni-pico-explorer-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/pimoroni-pico-explorer-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "pico_explorer"
|
||||
name = "pimoroni-pico-explorer"
|
||||
version = "0.1.0"
|
||||
authors = ["Hmvp <hmvp@users.noreply.github.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/pico_explorer"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/pimoroni-pico-explorer"
|
||||
description = "Board Support Package for the Pico Explorer"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [pico_explorer] - Board Support for the [Pimoroni Pico Explorer]
|
||||
# [pimoroni-pico-explorer] - Board Support for the [Pimoroni Pico Explorer]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Pimoroni Pico Explorer] - a board featuring a small LCD screen, a
|
||||
|
|
@ -7,8 +7,8 @@ breadboard and some breakout headers.
|
|||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Pico Explorer.
|
||||
|
||||
[Pimoroni Pico Explorer]: https://shop.pimoroni.com/products/pico-explorer-base
|
||||
[pico_explorer]: https://github.com/rp-rs/rp-hal/tree/main/boards/pico_explorer
|
||||
[Pimoroni Pico Explorer]: https://shop.pimoroni.com/products/pimoroni-pico-explorer-base
|
||||
[pimoroni-pico-explorer]: https://github.com/rp-rs/rp-hal/tree/main/boards/pimoroni-pico-explorer
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
||||
|
|
@ -17,10 +17,10 @@ RP2040 chip according to how it is connected up on the Pico Explorer.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
pico_explorer = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
pimoroni-pico-explorer = "0.1.0"
|
||||
```
|
||||
|
||||
In your program, you will need to call `pico_explorer::Pins::new` to create
|
||||
In your program, you will need to call `pimoroni_pico_explorer::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -31,7 +31,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pico_explorer $ cargo build --release --example <name>
|
||||
rp-hal/boards/pimoroni-pico-explorer $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -45,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pico_explorer $ cargo run --release --example <name>
|
||||
rp-hal/boards/pimoroni-pico-explorer $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -54,7 +54,7 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [pico_explorer_showcase](./examples/pico_explorer_showcase.rs)
|
||||
### [pimoroni_pico_explorer_showcase](./examples/pimoroni_pico_explorer_showcase.rs)
|
||||
|
||||
Displays the current temperature on the Pico Explorer's on-board LCD screen.
|
||||
|
||||
|
|
@ -14,7 +14,7 @@ use embedded_hal::digital::v2::OutputPin;
|
|||
use embedded_time::rate::*;
|
||||
use hal::{adc::Adc, clocks::*, watchdog::Watchdog, Sio};
|
||||
use panic_halt as _;
|
||||
use pico_explorer::{hal, pac, Button, PicoExplorer, XOSC_CRYSTAL_FREQ};
|
||||
use pimoroni_pico_explorer::{hal, pac, Button, PicoExplorer, XOSC_CRYSTAL_FREQ};
|
||||
|
||||
// See 4.9.5 from RP2040 datasheet
|
||||
fn calc_temp(adc_value: f32, refv: f64) -> f64 {
|
||||
23
boards/pimoroni-pico-lipo-16mb/CHANGELOG.md
Normal file
23
boards/pimoroni-pico-lipo-16mb/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/pimoroni-pico-lipo-16mb-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/pimoroni-pico-lipo-16mb-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "pico_lipo_16_mb"
|
||||
name = "pimoroni-pico-lipo-16mb"
|
||||
version = "0.1.0"
|
||||
authors = ["Hmvp <hmvp@users.noreply.github.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/pico_lipo_16_mb"
|
||||
description = "Board Support Package for the Pico LiPo 16 Mb"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/pimoroni-pico-lipo-16mb"
|
||||
description = "Board Support Package for the Pico LiPo 16MB"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [pico_lipo_16mb] - Board Support for the [Pimoroni Pico Lipo 16MB]
|
||||
# [pimoroni-pico-lipo-16mb] - Board Support for the [Pimoroni Pico Lipo 16MB]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Pimoroni Pico Lipo 16MB] - a board with USB-C, STEMMA QT/Qwiic connectors,
|
||||
|
|
@ -11,17 +11,17 @@ Note that if you use this crate the compiler will expect the full 16MB flash
|
|||
space, and so it may not work if you only have the 4MB variant.
|
||||
|
||||
[Pimoroni Pico Lipo 16MB]: https://shop.pimoroni.com/products/pimoroni-pico-lipo?variant=39335427080275
|
||||
[pico_lipo_16mb]: https://github.com/rp-rs/rp-hal/tree/main/boards/pico_lipo_16mb
|
||||
[pimoroni-pico-lipo-16mb]: https://github.com/rp-rs/rp-hal/tree/main/boards/pimoroni-pico-lipo-16mb
|
||||
|
||||
## Using
|
||||
|
||||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
pico_lipo_16mb = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
pimoroni-pico-lipo-16mb = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
```
|
||||
|
||||
In your program, you will need to call `pico_lipo_16mb::Pins::new` to create
|
||||
In your program, you will need to call `pimoroni_pico_lipo_16mb::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -32,7 +32,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pico_lipo_16mb $ cargo build --release --example <name>
|
||||
rp-hal/boards/pimoroni-pico-lipo-16mb $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -46,7 +46,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pico_lipo_16mb $ cargo run --release --example <name>
|
||||
rp-hal/boards/pimoroni-pico-lipo-16mb $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -55,7 +55,7 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [pico_lipo_16mb_blinky](./examples/pico_lipo_16mb_blinky.rs)
|
||||
### [pimoroni_pico_lipo_16mb_blinky](./examples/pimoroni_pico_lipo_16mb_blinky.rs)
|
||||
|
||||
Flashes the Pico Lipo's on-board LED on and off.
|
||||
|
||||
|
|
@ -24,15 +24,15 @@ use embedded_time::rate::*;
|
|||
use panic_halt as _;
|
||||
|
||||
// Pull in any important traits
|
||||
use pico_lipo_16_mb::hal::prelude::*;
|
||||
use pimoroni_pico_lipo_16mb::hal::prelude::*;
|
||||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico_lipo_16_mb::hal::pac;
|
||||
use pimoroni_pico_lipo_16mb::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico_lipo_16_mb::hal;
|
||||
use pimoroni_pico_lipo_16mb::hal;
|
||||
|
||||
/// Entry point to our bare-metal application.
|
||||
///
|
||||
|
|
@ -54,7 +54,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico_lipo_16_mb::XOSC_CRYSTAL_FREQ,
|
||||
pimoroni_pico_lipo_16mb::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
|
|
@ -73,7 +73,7 @@ fn main() -> ! {
|
|||
let sio = hal::Sio::new(pac.SIO);
|
||||
|
||||
// Set the pins up according to their function on this particular board
|
||||
let pins = pico_lipo_16_mb::Pins::new(
|
||||
let pins = pimoroni_pico_lipo_16mb::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
36
boards/rp-pico/CHANGELOG.md
Normal file
36
boards/rp-pico/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,36 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.2.0] - 2021-12-23
|
||||
|
||||
### Added
|
||||
|
||||
- Lots of things!
|
||||
|
||||
### Changed
|
||||
|
||||
- Basically re-written.
|
||||
|
||||
## [0.1.3] - 2021-02-03
|
||||
|
||||
- Last release outside the [rp-rs] organisation by [@jannic].
|
||||
|
||||
[@jannic]: https://github.com/jannic
|
||||
[rp-rs]: https://github.com/rp-rs
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/rp-pico-v0.1.0...HEAD
|
||||
[0.2.0]: https://github.com/rp-rs/rp-hal/releases/tag/rp-pico-v0.2.0
|
||||
[0.1.3]: https://github.com/jannic/rp-microcontroller-rs/tree/rp-pico-0.1.3
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "pico"
|
||||
version = "0.1.0"
|
||||
name = "rp-pico"
|
||||
version = "0.2.0"
|
||||
authors = ["evan <evanmolder@gmail.com>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/pico"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/pico"
|
||||
description = "Board Support Package for the Raspberry Pi Pico"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -20,19 +21,6 @@ usbd-serial = "0.1.1"
|
|||
usbd-hid = "0.5.1"
|
||||
futures = { version = "0.3", default-features = false, optional = true }
|
||||
|
||||
[dependencies.embassy]
|
||||
git = "https://github.com/embassy-rs/embassy"
|
||||
rev = "6d6e6f55b8a9ecd38b5a6d3bb11f74b2654afdeb"
|
||||
optional = true
|
||||
|
||||
# namespaced features will let use use "dep:embassy-traits" in the features rather than using this
|
||||
# trick of renaming the crate.
|
||||
[dependencies.embassy_traits]
|
||||
git = "https://github.com/embassy-rs/embassy"
|
||||
rev = "6d6e6f55b8a9ecd38b5a6d3bb11f74b2654afdeb"
|
||||
package = "embassy-traits"
|
||||
optional = true
|
||||
|
||||
[dev-dependencies]
|
||||
panic-halt= "0.2.0"
|
||||
embedded-hal ="0.2.5"
|
||||
|
|
@ -44,8 +32,3 @@ i2c-pio = { git = "https://github.com/ithinuel/i2c-pio-rs", rev = "df06e4ac94a5b
|
|||
default = ["boot2", "rt"]
|
||||
boot2 = ["rp2040-boot2"]
|
||||
rt = ["cortex-m-rt","rp2040-hal/rt"]
|
||||
embassy-traits = ["futures", "embassy", "embassy_traits"]
|
||||
|
||||
[[example]]
|
||||
name = "pico_i2c_controller_peripheral"
|
||||
required-features = ["embassy-traits"]
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
# [pico] - Board Support for the [Raspberry Pi Pico]
|
||||
# [rp-pico] - Board Support for the [Raspberry Pi Pico]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Raspberry Pi Pico] - the original launch PCB for the RP2040 chip.
|
||||
|
|
@ -7,7 +7,7 @@ This crate includes the [rp2040-hal], but also configures each pin of the
|
|||
RP2040 chip according to how it is connected up on the Pico.
|
||||
|
||||
[Raspberry Pi Pico]: https://www.raspberrypi.org/products/raspberry-pi-pico/
|
||||
[pico]: https://github.com/rp-rs/rp-hal/tree/main/boards/pico
|
||||
[rp-pico]: https://github.com/rp-rs/rp-hal/tree/main/boards/rp-pico
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
||||
|
|
@ -16,10 +16,10 @@ RP2040 chip according to how it is connected up on the Pico.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
pico = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
rp-pico = "0.2.0"
|
||||
```
|
||||
|
||||
In your program, you will need to call `pico::Pins::new` to create
|
||||
In your program, you will need to call `rp_pico::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -30,7 +30,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pico $ cargo build --release --example <name>
|
||||
rp-hal/boards/rp-pico $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -44,7 +44,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pico $ cargo run --release --example <name>
|
||||
rp-hal/boards/rp-pico $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -24,15 +24,15 @@ use embedded_time::rate::*;
|
|||
use panic_halt as _;
|
||||
|
||||
// Pull in any important traits
|
||||
use pico::hal::prelude::*;
|
||||
use rp_pico::hal::prelude::*;
|
||||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
/// Entry point to our bare-metal application.
|
||||
///
|
||||
|
|
@ -54,7 +54,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico::XOSC_CRYSTAL_FREQ,
|
||||
rp_pico::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
|
|
@ -73,7 +73,7 @@ fn main() -> ! {
|
|||
let sio = hal::Sio::new(pac.SIO);
|
||||
|
||||
// Set the pins up according to their function on this particular board
|
||||
let pins = pico::Pins::new(
|
||||
let pins = rp_pico::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -27,11 +27,11 @@ use panic_halt as _;
|
|||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
#[entry]
|
||||
fn main() -> ! {
|
||||
|
|
@ -45,7 +45,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let _clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico::XOSC_CRYSTAL_FREQ,
|
||||
rp_pico::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
|
|
@ -64,7 +64,7 @@ fn main() -> ! {
|
|||
let sio = hal::Sio::new(pac.SIO);
|
||||
|
||||
// Set the pins up according to their function on this particular board
|
||||
let pins = pico::Pins::new(
|
||||
let pins = rp_pico::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -24,11 +24,11 @@ use panic_halt as _;
|
|||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
/// Entry point to our bare-metal application.
|
||||
///
|
||||
|
|
@ -49,7 +49,7 @@ fn main() -> ! {
|
|||
let sio = hal::Sio::new(pac.SIO);
|
||||
|
||||
// Set the pins up according to their function on this particular board
|
||||
let pins = pico::Pins::new(
|
||||
let pins = rp_pico::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -28,15 +28,15 @@ use embedded_time::rate::*;
|
|||
use panic_halt as _;
|
||||
|
||||
// Pull in any important traits
|
||||
use pico::hal::prelude::*;
|
||||
use rp_pico::hal::prelude::*;
|
||||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
/// Prints the temperature received from the sensor
|
||||
fn print_temperature(serial: &mut impl FmtWrite, temp: [u8; 2]) {
|
||||
|
|
@ -66,7 +66,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico::XOSC_CRYSTAL_FREQ,
|
||||
rp_pico::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
|
|
@ -81,7 +81,7 @@ fn main() -> ! {
|
|||
let sio = hal::Sio::new(pac.SIO);
|
||||
|
||||
// Set the pins up according to their function on this particular board
|
||||
let pins = pico::Pins::new(
|
||||
let pins = rp_pico::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -24,15 +24,15 @@ use embedded_time::rate::*;
|
|||
use panic_halt as _;
|
||||
|
||||
// Pull in any important traits
|
||||
use pico::hal::prelude::*;
|
||||
use rp_pico::hal::prelude::*;
|
||||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
// The minimum PWM value (i.e. LED brightness) we want
|
||||
const LOW: u16 = 0;
|
||||
|
|
@ -60,7 +60,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico::XOSC_CRYSTAL_FREQ,
|
||||
rp_pico::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
|
|
@ -75,7 +75,7 @@ fn main() -> ! {
|
|||
let sio = hal::Sio::new(pac.SIO);
|
||||
|
||||
// Set the pins up according to their function on this particular board
|
||||
let pins = pico::Pins::new(
|
||||
let pins = rp_pico::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -3,12 +3,12 @@
|
|||
|
||||
use panic_halt as _;
|
||||
|
||||
#[rtic::app(device = pico::hal::pac, peripherals = true)]
|
||||
#[rtic::app(device = rp_pico::hal::pac, peripherals = true)]
|
||||
mod app {
|
||||
|
||||
use embedded_hal::digital::v2::OutputPin;
|
||||
use embedded_time::duration::Extensions;
|
||||
use pico::{
|
||||
use rp_pico::{
|
||||
hal::{self, clocks::init_clocks_and_plls, watchdog::Watchdog, Sio},
|
||||
XOSC_CRYSTAL_FREQ,
|
||||
};
|
||||
|
|
@ -42,7 +42,7 @@ mod app {
|
|||
.unwrap();
|
||||
|
||||
let sio = Sio::new(c.device.SIO);
|
||||
let pins = pico::Pins::new(
|
||||
let pins = rp_pico::Pins::new(
|
||||
c.device.IO_BANK0,
|
||||
c.device.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -21,11 +21,11 @@ use panic_halt as _;
|
|||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
// USB Device support
|
||||
use usb_device::{class_prelude::*, prelude::*};
|
||||
|
|
@ -52,7 +52,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico::XOSC_CRYSTAL_FREQ,
|
||||
rp_pico::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
|
|
@ -16,7 +16,7 @@
|
|||
use cortex_m_rt::entry;
|
||||
|
||||
// The macro for marking our interrupt functions
|
||||
use pico::hal::pac::interrupt;
|
||||
use rp_pico::hal::pac::interrupt;
|
||||
|
||||
// GPIO traits
|
||||
use embedded_hal::digital::v2::OutputPin;
|
||||
|
|
@ -29,15 +29,15 @@ use embedded_time::rate::*;
|
|||
use panic_halt as _;
|
||||
|
||||
// Pull in any important traits
|
||||
use pico::hal::prelude::*;
|
||||
use rp_pico::hal::prelude::*;
|
||||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
// USB Device support
|
||||
use usb_device::{class_prelude::*, prelude::*};
|
||||
|
|
@ -74,7 +74,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico::XOSC_CRYSTAL_FREQ,
|
||||
rp_pico::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
|
|
@ -137,7 +137,7 @@ fn main() -> ! {
|
|||
let sio = hal::Sio::new(pac.SIO);
|
||||
|
||||
// Set the pins up according to their function on this particular board
|
||||
let pins = pico::Pins::new(
|
||||
let pins = rp_pico::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -18,7 +18,7 @@
|
|||
use cortex_m_rt::entry;
|
||||
|
||||
// The macro for marking our interrupt functions
|
||||
use pico::hal::pac::interrupt;
|
||||
use rp_pico::hal::pac::interrupt;
|
||||
|
||||
// Ensure we halt the program on panic (if we don't mention this crate it won't
|
||||
// be linked)
|
||||
|
|
@ -26,15 +26,15 @@ use panic_halt as _;
|
|||
|
||||
// Pull in any important traits
|
||||
use embedded_time::fixed_point::FixedPoint;
|
||||
use pico::hal::prelude::*;
|
||||
use rp_pico::hal::prelude::*;
|
||||
|
||||
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
||||
// register access
|
||||
use pico::hal::pac;
|
||||
use rp_pico::hal::pac;
|
||||
|
||||
// A shorter alias for the Hardware Abstraction Layer, which provides
|
||||
// higher-level drivers.
|
||||
use pico::hal;
|
||||
use rp_pico::hal;
|
||||
|
||||
// USB Device support
|
||||
use usb_device::{class_prelude::*, prelude::*};
|
||||
|
|
@ -72,7 +72,7 @@ fn main() -> ! {
|
|||
//
|
||||
// The default is to generate a 125 MHz system clock
|
||||
let clocks = hal::clocks::init_clocks_and_plls(
|
||||
pico::XOSC_CRYSTAL_FREQ,
|
||||
rp_pico::XOSC_CRYSTAL_FREQ,
|
||||
pac.XOSC,
|
||||
pac.CLOCKS,
|
||||
pac.PLL_SYS,
|
||||
23
boards/sparkfun-pro-micro-rp2040/CHANGELOG.md
Normal file
23
boards/sparkfun-pro-micro-rp2040/CHANGELOG.md
Normal file
|
|
@ -0,0 +1,23 @@
|
|||
# Changelog
|
||||
|
||||
All notable changes to this project will be documented in this file.
|
||||
|
||||
The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
|
||||
and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
|
||||
|
||||
## [Unreleased]
|
||||
|
||||
### Added
|
||||
|
||||
- None
|
||||
|
||||
### Changed
|
||||
|
||||
- None
|
||||
|
||||
## [0.1.0] - 2021-12-20
|
||||
|
||||
- Initial release
|
||||
|
||||
[Unreleased]: https://github.com/rp-rs/rp-hal/compare/sparkfun-pro-micro-rp2040-v0.1.0...HEAD
|
||||
[0.1.0]: https://github.com/rp-rs/rp-hal/releases/tag/sparkfun-pro-micro-rp2040-v0.1.0
|
||||
|
|
@ -1,11 +1,12 @@
|
|||
[package]
|
||||
name = "pro_micro_rp2040"
|
||||
name = "sparkfun-pro-micro-rp2040"
|
||||
version = "0.1.0"
|
||||
authors = ["Wilfried Chauveau <wilfried.chauveau@ithinuel.me>"]
|
||||
edition = "2018"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/boards/pro_micro_rp2040"
|
||||
homepage = "https://github.com/rp-rs/rp-hal/tree/main/boards/sparkfun-pro-micro-rp2040"
|
||||
description = "Board Support Package for the Sparkfun Pro Micro RP2040"
|
||||
license = "MIT OR Apache-2.0"
|
||||
repository = "https://github.com/rp-rs/rp-hal.git"
|
||||
|
||||
# See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
|
||||
|
||||
|
|
@ -1,13 +1,14 @@
|
|||
# [pro_micro_rp2040] - Board Support for the [Sparkfun Pro Micro RP2040]
|
||||
# [sparkfun-pro-micro-rp2040] - Board Support for the [Sparkfun Pro Micro RP2040]
|
||||
|
||||
You should include this crate if you are writing code that you want to run on
|
||||
a [Sparkfun Pro Micro RP2040] - a smaller [RP2040][Raspberry Silicon RP2040] board with USB-C and a WS2812B addressable LED.
|
||||
a [Sparkfun Pro Micro RP2040] - a smaller [RP2040][Raspberry Silicon RP2040]
|
||||
board with USB-C and a WS2812B addressable LED.
|
||||
|
||||
This crate includes the [rp2040-hal], but also configures each pin of the
|
||||
RP2040 chip according to how it is connected up on the Pro Micro RP2040.
|
||||
|
||||
[Sparkfun Pro Micro RP2040]: https://www.sparkfun.com/products/18288
|
||||
[pro_micro_rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/pro_micro_rp2040
|
||||
[sparkfun-pro-micro-rp2040]: https://github.com/rp-rs/rp-hal/tree/main/boards/sparkfun-pro-micro-rp2040
|
||||
[rp2040-hal]: https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal
|
||||
[Raspberry Silicon RP2040]: https://www.raspberrypi.org/products/rp2040/
|
||||
|
||||
|
|
@ -16,10 +17,10 @@ RP2040 chip according to how it is connected up on the Pro Micro RP2040.
|
|||
To use this crate, your `Cargo.toml` file should contain:
|
||||
|
||||
```toml
|
||||
pro_micro_rp2040 = { git = "https://github.com/rp-rs/rp-hal.git" }
|
||||
sparkfun-pro-micro-rp2040 = "0.1.0"
|
||||
```
|
||||
|
||||
In your program, you will need to call `pro_micro_rp2040::Pins::new` to create
|
||||
In your program, you will need to call `sparkfun_pro_micro_rp2040::Pins::new` to create
|
||||
a new `Pins` structure. This will set up all the GPIOs for any on-board
|
||||
devices. See the [examples](./examples) folder for more details.
|
||||
|
||||
|
|
@ -30,7 +31,7 @@ devices. See the [examples](./examples) folder for more details.
|
|||
To compile an example, clone the _rp-hal_ repository and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pro_micro_rp2040 $ cargo build --release --example <name>
|
||||
rp-hal/boards/sparkfun-pro-micro-rp2040 $ cargo build --release --example <name>
|
||||
```
|
||||
|
||||
You will get an ELF file called
|
||||
|
|
@ -44,7 +45,7 @@ USB drive exported by the RP2040 bootloader, simply boot your board into
|
|||
bootloader mode and run:
|
||||
|
||||
```console
|
||||
rp-hal/boards/pro_micro_rp2040 $ cargo run --release --example <name>
|
||||
rp-hal/boards/sparkfun-pro-micro-rp2040 $ cargo run --release --example <name>
|
||||
```
|
||||
|
||||
If you get an error about not being able to find `elf2uf2-rs`, try:
|
||||
|
|
@ -53,7 +54,7 @@ If you get an error about not being able to find `elf2uf2-rs`, try:
|
|||
$ cargo install elf2uf2-rs, then repeating the `cargo run` command above.
|
||||
```
|
||||
|
||||
### [Rainbow](./examples/pro_micro_rainbow.rs)
|
||||
### [Rainbow](./examples/sparkfun_pro_micro_rainbow.rs)
|
||||
|
||||
This example will display a colour-wheel rainbow effect on the on-board LED.
|
||||
|
||||
|
|
@ -14,7 +14,8 @@ use embedded_hal::timer::CountDown;
|
|||
use embedded_time::duration::Extensions;
|
||||
use panic_halt as _;
|
||||
|
||||
use pro_micro_rp2040::{
|
||||
use smart_leds::{brightness, SmartLedsWrite, RGB8};
|
||||
use sparkfun_pro_micro_rp2040::{
|
||||
hal::{
|
||||
clocks::{init_clocks_and_plls, Clock},
|
||||
pac,
|
||||
|
|
@ -25,7 +26,6 @@ use pro_micro_rp2040::{
|
|||
},
|
||||
XOSC_CRYSTAL_FREQ,
|
||||
};
|
||||
use smart_leds::{brightness, SmartLedsWrite, RGB8};
|
||||
use ws2812_pio::Ws2812;
|
||||
|
||||
/// Entry point to our bare-metal application.
|
||||
|
|
@ -56,7 +56,7 @@ fn main() -> ! {
|
|||
|
||||
let sio = Sio::new(pac.SIO);
|
||||
|
||||
let pins = pro_micro_rp2040::Pins::new(
|
||||
let pins = sparkfun_pro_micro_rp2040::Pins::new(
|
||||
pac.IO_BANK0,
|
||||
pac.PADS_BANK0,
|
||||
sio.gpio_bank0,
|
||||
|
|
@ -35,7 +35,7 @@
|
|||
//! ```
|
||||
//!
|
||||
//! See [examples/adc.rs](https://github.com/rp-rs/rp-hal/tree/main/rp2040-hal/examples/adc.rs) and
|
||||
//! [pico_explorer_showcase.rs](https://github.com/rp-rs/rp-hal/tree/main/boards/pico_explorer/examples/pico_explorer_showcase.rs) for more complete examples
|
||||
//! [pimoroni_pico_explorer_showcase.rs](https://github.com/rp-rs/rp-hal/tree/main/boards/pimoroni_pico_explorer/examples/pimoroni_pico_explorer_showcase.rs) for more complete examples
|
||||
|
||||
use hal::adc::{Channel, OneShot};
|
||||
use pac::{ADC, RESETS};
|
||||
|
|
|
|||
Loading…
Reference in a new issue