The servo example included phase correction, which does not work with the
provided divider. Updated comments to explain numbers and also explain
alternate calculation with phase correction enabled.
Remove unusable aliases from all servo pins. The board includes a 180 Ohm
resistor on all servo data pins, which makes the lines not very usable for
Spi, Uart or I2C. The aliases were removed given they will rarely, if ever,
be used with this board.
* Add the Pimoroni Servo 2040 board
This PR adds the board support package and two simple examples.
* Animates a rainbow wheel across the RGB LEDs on the board.
* Moves a servo that's connected to GPIO0 back and forth.
* Format pimoroni-servo2040 board files
* Use us_to_duty function in servo example, clean up comments.
* Fix bad types
* Add Servo2040 description to top-level readme
* pio: Move interrupt related (en|dis)abling/forcing methods to the statemachine
The SM knows its id using the type system so there's no need for checking it.
This commit also adds a `PioIRQ` enum to select the output IRQ.
* Move the interrupt control to Rx & Tx and make all accesses to inte atomic
* Adjust the ergonomics of IRQ handling.
* Elide lifetimes where they can be (clippy's advice)
* Prep for HAL 0.6.0 release
* Update changelog, readme and version number for HAL 0.5.0 release
* Bump HAL version in BSP deps
* Add the missing boards to the main README.md
* Implementation of the interpolator.
* corrected formatting
* fixed documentation code
* add clamp flag to LaneCtrl
* addition of an example for the interpolator
* put documentation behind ///
* rewording comment for clarity
* using more idiomatic fn new
There are a lot of non-binary crates depending on rp2040-hal. That way,
the default-features of rp2040-hal may be activated unintentionally
through an indirect dependency. Therefore, a binary crate which wants
to disable the `critical-section-impl` feature to provide its own one
could have a hard time to do so.
In contrast, the board support crates are usually only used by top-level
binary crates. So disabling the default features on those should usually
just work.
Binary crates depending on rp2040-hal directly, which don't use any
board support crate, might need to activate the feature manually. This
is reasonable because those binary crates need to replicate some
boilerplate from the board crates anyhow.
