mirror of
https://github.com/italicsjenga/rp-hal-boards.git
synced 2024-12-24 05:01:31 +11:00
125 lines
3.4 KiB
Rust
125 lines
3.4 KiB
Rust
//! # PWM Blink Example
|
|
//!
|
|
//! If you have an LED connected to pin 25, it will fade the LED using the PWM
|
|
//! peripheral.
|
|
//!
|
|
//! It may need to be adapted to your particular board layout and/or pin assignment.
|
|
//!
|
|
//! See the `Cargo.toml` file for Copyright and licence details.
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
|
|
// The macro for our start-up function
|
|
use cortex_m_rt::entry;
|
|
|
|
// Ensure we halt the program on panic (if we don't mention this crate it won't
|
|
// be linked)
|
|
use panic_halt as _;
|
|
|
|
// Alias for our HAL crate
|
|
use rp2040_hal as hal;
|
|
|
|
// Some traits we need
|
|
use embedded_hal::PwmPin;
|
|
use embedded_time::rate::*;
|
|
use rp2040_hal::clocks::Clock;
|
|
|
|
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
|
// register access
|
|
use hal::pac;
|
|
|
|
/// The linker will place this boot block at the start of our program image. We
|
|
/// need this to help the ROM bootloader get our code up and running.
|
|
#[link_section = ".boot2"]
|
|
#[used]
|
|
pub static BOOT2: [u8; 256] = rp2040_boot2::BOOT_LOADER_W25Q080;
|
|
|
|
/// The minimum PWM value (i.e. LED brightness) we want
|
|
const LOW: u16 = 0;
|
|
|
|
/// The maximum PWM value (i.e. LED brightness) we want
|
|
const HIGH: u16 = 25000;
|
|
|
|
/// External high-speed crystal on the Raspberry Pi Pico board is 12 MHz. Adjust
|
|
/// if your board has a different frequency
|
|
const XTAL_FREQ_HZ: u32 = 12_000_000u32;
|
|
|
|
/// Entry point to our bare-metal application.
|
|
///
|
|
/// The `#[entry]` macro ensures the Cortex-M start-up code calls this function
|
|
/// as soon as all global variables are initialised.
|
|
///
|
|
/// The function configures the RP2040 peripherals, then fades the LED in an
|
|
/// infinite loop.
|
|
#[entry]
|
|
fn main() -> ! {
|
|
// Grab our singleton objects
|
|
let mut pac = pac::Peripherals::take().unwrap();
|
|
let core = pac::CorePeripherals::take().unwrap();
|
|
|
|
// Set up the watchdog driver - needed by the clock setup code
|
|
let mut watchdog = hal::Watchdog::new(pac.WATCHDOG);
|
|
|
|
// Configure the clocks
|
|
//
|
|
// The default is to generate a 125 MHz system clock
|
|
let clocks = hal::clocks::init_clocks_and_plls(
|
|
XTAL_FREQ_HZ,
|
|
pac.XOSC,
|
|
pac.CLOCKS,
|
|
pac.PLL_SYS,
|
|
pac.PLL_USB,
|
|
&mut pac.RESETS,
|
|
&mut watchdog,
|
|
)
|
|
.ok()
|
|
.unwrap();
|
|
|
|
// The single-cycle I/O block controls our GPIO pins
|
|
let sio = hal::Sio::new(pac.SIO);
|
|
|
|
// Set the pins up according to their function on this particular board
|
|
let pins = hal::gpio::Pins::new(
|
|
pac.IO_BANK0,
|
|
pac.PADS_BANK0,
|
|
sio.gpio_bank0,
|
|
&mut pac.RESETS,
|
|
);
|
|
|
|
// The delay object lets us wait for specified amounts of time (in
|
|
// milliseconds)
|
|
let mut delay = cortex_m::delay::Delay::new(core.SYST, clocks.system_clock.freq().integer());
|
|
|
|
// Init PWMs
|
|
let mut pwm_slices = hal::pwm::Slices::new(pac.PWM, &mut pac.RESETS);
|
|
|
|
// Configure PWM4
|
|
let pwm = &mut pwm_slices.pwm4;
|
|
pwm.set_ph_correct();
|
|
pwm.enable();
|
|
|
|
// Output channel B on PWM4 to GPIO 25
|
|
let channel = &mut pwm.channel_b;
|
|
channel.output_to(pins.gpio25);
|
|
|
|
// Infinite loop, fading LED up and down
|
|
loop {
|
|
// Ramp brightness up
|
|
for i in (LOW..=HIGH).skip(100) {
|
|
delay.delay_us(8);
|
|
channel.set_duty(i);
|
|
}
|
|
|
|
// Ramp brightness down
|
|
for i in (LOW..=HIGH).rev().skip(100) {
|
|
delay.delay_us(8);
|
|
channel.set_duty(i);
|
|
}
|
|
|
|
delay.delay_ms(500);
|
|
}
|
|
}
|
|
|
|
// End of file
|