mirror of
https://github.com/italicsjenga/rp-hal-boards.git
synced 2024-12-25 21:41:31 +11:00
102 lines
2.8 KiB
Rust
102 lines
2.8 KiB
Rust
//! # Pimoroni Pico Lipo Blinky Example
|
|
//!
|
|
//! Blinks the LED on a Pimoroni Pico Lipo 16MB board.
|
|
//!
|
|
//! This will blink an LED attached to GPIO25, which is the pin the Pico Lipo uses
|
|
//! for the on-board LED.
|
|
//!
|
|
//! See the `Cargo.toml` file for Copyright and licence details.
|
|
|
|
#![no_std]
|
|
#![no_main]
|
|
|
|
// The macro for our start-up function
|
|
use cortex_m_rt::entry;
|
|
|
|
// GPIO traits
|
|
use embedded_hal::digital::v2::OutputPin;
|
|
|
|
// Time handling traits
|
|
use embedded_time::rate::*;
|
|
|
|
// Ensure we halt the program on panic (if we don't mention this crate it won't
|
|
// be linked)
|
|
use panic_halt as _;
|
|
|
|
// Pull in any important traits
|
|
use pico_lipo_16_mb::hal::prelude::*;
|
|
|
|
// A shorter alias for the Peripheral Access Crate, which provides low-level
|
|
// register access
|
|
use pico_lipo_16_mb::hal::pac;
|
|
|
|
// A shorter alias for the Hardware Abstraction Layer, which provides
|
|
// higher-level drivers.
|
|
use pico_lipo_16_mb::hal;
|
|
|
|
//// The linker will place this boot block at the start of our program image. We
|
|
//// need this to help the ROM bootloader get our code up and running.
|
|
#[link_section = ".boot2"]
|
|
#[used]
|
|
pub static BOOT2: [u8; 256] = rp2040_boot2::BOOT_LOADER_W25Q080;
|
|
|
|
/// Entry point to our bare-metal application.
|
|
///
|
|
/// The `#[entry]` macro ensures the Cortex-M start-up code calls this function
|
|
/// as soon as all global variables are initialised.
|
|
///
|
|
/// The function configures the RP2040 peripherals, then blinks the LED in an
|
|
/// infinite loop.
|
|
#[entry]
|
|
fn main() -> ! {
|
|
// Grab our singleton objects
|
|
let mut pac = pac::Peripherals::take().unwrap();
|
|
let core = pac::CorePeripherals::take().unwrap();
|
|
|
|
// Set up the watchdog driver - needed by the clock setup code
|
|
let mut watchdog = hal::Watchdog::new(pac.WATCHDOG);
|
|
|
|
// Configure the clocks
|
|
//
|
|
// The default is to generate a 125 MHz system clock
|
|
let clocks = hal::clocks::init_clocks_and_plls(
|
|
pico_lipo_16_mb::XOSC_CRYSTAL_FREQ,
|
|
pac.XOSC,
|
|
pac.CLOCKS,
|
|
pac.PLL_SYS,
|
|
pac.PLL_USB,
|
|
&mut pac.RESETS,
|
|
&mut watchdog,
|
|
)
|
|
.ok()
|
|
.unwrap();
|
|
|
|
// The delay object lets us wait for specified amounts of time (in
|
|
// milliseconds)
|
|
let mut delay = cortex_m::delay::Delay::new(core.SYST, clocks.system_clock.freq().integer());
|
|
|
|
// The single-cycle I/O block controls our GPIO pins
|
|
let sio = hal::Sio::new(pac.SIO);
|
|
|
|
// Set the pins up according to their function on this particular board
|
|
let pins = pico_lipo_16_mb::Pins::new(
|
|
pac.IO_BANK0,
|
|
pac.PADS_BANK0,
|
|
sio.gpio_bank0,
|
|
&mut pac.RESETS,
|
|
);
|
|
|
|
// Set the LED to be an output
|
|
let mut led_pin = pins.led.into_push_pull_output();
|
|
|
|
// Blink the LED at 1 Hz
|
|
loop {
|
|
led_pin.set_high().unwrap();
|
|
delay.delay_ms(500);
|
|
led_pin.set_low().unwrap();
|
|
delay.delay_ms(500);
|
|
}
|
|
}
|
|
|
|
// End of file
|