slang-shaders/nes_raw_palette/shaders/cgwg-famicom-geom/crt-geom-famicom.slang

#version 450

layout(push_constant) uniform Push
{
	vec4 SourceSize;
	vec4 OriginalSize;
	vec4 OutputSize;
	uint FrameCount;
	float CURVATURE_toggle, CRTgamma, overscan_x, overscan_y, distance, radius, tiltangle_x, tiltangle_y, cornersize, cornersmooth;
} params;

#pragma parameter CURVATURE_toggle "Curvature Toggle" 1.0 0.0 1.0 1.0
#define CURVATURE bool(params.CURVATURE_toggle)
// gamma of simulated CRT
#pragma parameter CRTgamma "CRT Gamma" 2.4 1.0 4.0 0.05
#define CRTgamma params.CRTgamma
// overscan (e.g. 1.02 for 2% overscan)
#pragma parameter overscan_x "Overscan X" 1.0 0.0 2.0 0.01
#pragma parameter overscan_y "Overscan Y" 1.0 0.0 2.0 0.01
#define overscan vec2(params.overscan_x, params.overscan_y)
#pragma parameter distance "Viewing Distance" 2.0 0.1 5.0 0.1
#define distance params.distance
// radius of curvature
#pragma parameter radius "Curvature Radius" 2.0 0.1 5.0 0.1
#define radius params.radius
// tilt angle in radians
// (behavior might be a bit wrong if both components are nonzero)
#pragma parameter tiltangle_x "Tilt Angle X" 0.0 -1.0 1.0 0.05
#pragma parameter tiltangle_y "Tilt Angle Y" 0.0 -1.0 1.0 0.05
#define tiltangle vec2(params.tiltangle_x, params.tiltangle_y) + 0.001
// size of curved corners
#pragma parameter cornersize "Corner Size" 0.02 0.0001 0.1 0.01
#define cornersize params.cornersize
// border smoothness parameter
// decrease if borders are too aliased
#pragma parameter cornersmooth "Corner Smoothness" 800.0 0.8 2000.0 50.0
#define cornersmooth params.cornersmooth

layout(std140, set = 0, binding = 0) uniform UBO
{
	mat4 MVP;
} global;

#pragma stage vertex
layout(location = 0) in vec4 Position;
layout(location = 1) in vec2 TexCoord;
layout(location = 0) out vec2 texCoord;
layout(location = 1) out vec3 stretch;

const vec2 aspect = vec2(1.0, 0.75);
float d = distance;
float R = radius;
vec2 sinangle = sin(tiltangle);
vec2 cosangle = cos(tiltangle);

vec2 one;
float mod_factor;
vec2 ilfac;

#define FIX(c) max(abs(c), 1e-5);

float intersect(vec2 xy)
{
  float A = dot(xy,xy)+d*d;
  float B = 2.0*(R*(dot(xy,sinangle)-d*cosangle.x*cosangle.y)-d*d);
  float C = d*d + 2.0*R*d*cosangle.x*cosangle.y;
  return (-B-sqrt(B*B-4.0*A*C))/(2.0*A);
}

vec2 bkwtrans(vec2 xy)
{
  float c = intersect(xy);
  vec2 point = vec2(c)*xy;
  point -= vec2(-R)*sinangle;
  point /= vec2(R);
  vec2 tang = sinangle/cosangle;
  vec2 poc = point/cosangle;
  float A = dot(tang,tang)+1.0;
  float B = -2.0*dot(poc,tang);
  float C = dot(poc,poc)-1.0;
  float a = (-B+sqrt(B*B-4.0*A*C))/(2.0*A);
  vec2 uv = (point-a*sinangle)/cosangle;
  float r = R*acos(a);
  return uv*r/sin(r/R);
}

vec2 fwtrans(vec2 uv)
{
  float r = FIX(sqrt(dot(uv,uv)));
  uv *= sin(r/R)/r;
  float x = 1.0-cos(r/R);
  float D = d/R + x*cosangle.x*cosangle.y+dot(uv,sinangle);
  return d*(uv*cosangle-x*sinangle)/D;
}

vec3 maxscale()
{
  vec2 c = bkwtrans(-R * sinangle / (1.0 + R/d*cosangle.x*cosangle.y));
  vec2 a = vec2(0.5,0.5)*aspect;
  vec2 lo = vec2(fwtrans(vec2(-a.x,c.y)).x,
		 fwtrans(vec2(c.x,-a.y)).y)/aspect;
  vec2 hi = vec2(fwtrans(vec2(+a.x,c.y)).x,
		 fwtrans(vec2(c.x,+a.y)).y)/aspect;
  return vec3((hi+lo)*aspect*0.5,max(hi.x-lo.x,hi.y-lo.y));
}

void main()
{
   gl_Position = global.MVP * Position;
   texCoord = TexCoord;
   stretch = maxscale();
}

#pragma stage fragment
layout(location = 0) in vec2 texCoord;
layout(location = 1) in vec3 stretch;
layout(location = 0) out vec4 FragColor;
layout(set = 0, binding = 2) uniform sampler2D Source;

// Comment the next line to disable interpolation in linear gamma (and gain speed).
//#define LINEAR_PROCESSING

// Enable 3x oversampling of the beam profile
#define OVERSAMPLE

// Use the older, purely gaussian beam profile
//#define USEGAUSSIAN

// gamma of display monitor (typically 2.2 is correct)
#define monitorgamma 2.2

// aspect ratio
const vec2 aspect = vec2(1.0, 0.75);
// lengths are measured in units of (approximately) the width of the monitor
// simulated distance from viewer to monitor
float d = distance;
float R = radius;

vec2 sinangle = sin(tiltangle);
vec2 cosangle = cos(tiltangle);

#define one (params.SourceSize.zw)

// Macros.
#define FIX(c) max(abs(c), 1e-5);
#define PI 3.141592653589

#ifdef LINEAR_PROCESSING
#       define TEX2D(c) pow(texture(Source, (c)), vec4(CRTgamma))
#else
#       define TEX2D(c) texture(Source, (c))
#endif

#define FIX(c) max(abs(c), 1e-5);

float intersect(vec2 xy)
{
  float A = dot(xy,xy)+d*d;
  float B = 2.0*(R*(dot(xy,sinangle)-d*cosangle.x*cosangle.y)-d*d);
  float C = d*d + 2.0*R*d*cosangle.x*cosangle.y;
  return (-B-sqrt(B*B-4.0*A*C))/(2.0*A);
}

vec2 bkwtrans(vec2 xy)
{
  float c = intersect(xy);
  vec2 point = vec2(c)*xy;
  point -= vec2(-R)*sinangle;
  point /= vec2(R);
  vec2 tang = sinangle/cosangle;
  vec2 poc = point/cosangle;
  float A = dot(tang,tang)+1.0;
  float B = -2.0*dot(poc,tang);
  float C = dot(poc,poc)-1.0;
  float a = (-B+sqrt(B*B-4.0*A*C))/(2.0*A);
  vec2 uv = (point-a*sinangle)/cosangle;
  float r = FIX(R*acos(a));
  return uv*r/sin(r/R);
}

vec2 transform(vec2 coord)
{
  coord = (coord-vec2(0.5))*aspect*stretch.z+stretch.xy;
  return (bkwtrans(coord)/overscan/aspect+vec2(0.5));
}

float corner(vec2 coord)
{
  coord = (coord - vec2(0.5)) * overscan + vec2(0.5);
  coord = min(coord, vec2(1.0)-coord) * aspect;
  vec2 cdist = vec2(cornersize);
  coord = (cdist - min(coord,cdist));
  float dist = sqrt(dot(coord,coord));
  return clamp((cdist.x-dist)*cornersmooth,0.0, 1.0);
}

// Calculate the influence of a scanline on the current pixel.
//
// 'dist' is the distance in texture coordinates from the current
// pixel to the scanline in question.
// 'color' is the colour of the scanline at the horizontal location of
// the current pixel.
vec4 scanlineWeights(float dist, vec4 color)
{
  // "wid" controls the width of the scanline beam, for each RGB channel
  // The "weights" lines basically specify the formula that gives
  // you the profile of the beam, i.e. the intensity as
  // a function of distance from the vertical center of the
  // scanline. In this case, it is gaussian if width=2, and
  // becomes nongaussian for larger widths. Ideally this should
  // be normalized so that the integral across the beam is
  // independent of its width. That is, for a narrower beam
  // "weights" should have a higher peak at the center of the
  // scanline than for a wider beam.
#ifdef USEGAUSSIAN
  vec4 wid = 0.3 + 0.1 * pow(color, vec4(3.0));
  vec4 weights = vec4(dist / wid);
  return 0.4 * exp(-weights * weights) / wid;
#else
  vec4 wid = 2.0 + 2.0 * pow(color, vec4(4.0));
  vec4 weights = vec4(dist / 0.3);
  return 1.4 * exp(-pow(weights * inversesqrt(0.5 * wid), wid)) / (0.6 + 0.2 * wid);
#endif
}

void main()
{
  // Here's a helpful diagram to keep in mind while trying to
  // understand the code:
  //
  //  |      |      |      |      |
  // -------------------------------
  //  |      |      |      |      |
  //  |  01  |  11  |  21  |  31  | <-- current scanline
  //  |      | @    |      |      |
  // -------------------------------
  //  |      |      |      |      |
  //  |  02  |  12  |  22  |  32  | <-- next scanline
  //  |      |      |      |      |
  // -------------------------------
  //  |      |      |      |      |
  //
  // Each character-cell represents a pixel on the output
  // surface, "@" represents the current pixel (always somewhere
  // in the bottom half of the current scan-line, or the top-half
  // of the next scanline). The grid of lines represents the
  // edges of the texels of the underlying texture.

  // Texture coordinates of the texel containing the active pixel.
  vec2 xy = CURVATURE ? transform(texCoord) : texCoord;
  float cval = corner(xy);
  
  // Of all the pixels that are mapped onto the texel we are
  // currently rendering, which pixel are we currently rendering?
  vec2 ratio_scale = xy * params.SourceSize.xy - vec2(0.5);

#ifdef OVERSAMPLE
  float filter_ = fwidth(ratio_scale.y);
#endif
  vec2 uv_ratio = fract(ratio_scale);

  // Snap to the center of the underlying texel.
  xy = (floor(ratio_scale) + vec2(0.5)) / params.SourceSize.xy;

  // Calculate Lanczos scaling coefficients describing the effect
  // of various neighbour texels in a scanline on the current
  // pixel.
  vec4 coeffs = PI * vec4(1.0 + uv_ratio.x, uv_ratio.x, 1.0 - uv_ratio.x, 2.0 - uv_ratio.x);

  // Prevent division by zero.
  coeffs = FIX(coeffs);

  // Lanczos2 kernel.
  coeffs = 2.0 * sin(coeffs) * sin(coeffs / 2.0) / (coeffs * coeffs);

  // Normalize.
  coeffs /= dot(coeffs, vec4(1.0));

  // Calculate the effective colour of the current and next
  // scanlines at the horizontal location of the current pixel,
  // using the Lanczos coefficients above.
  vec4 col  = clamp(mat4(
			 TEX2D(xy + vec2(-one.x, 0.0)),
			 TEX2D(xy),
			 TEX2D(xy + vec2(one.x, 0.0)),
			 TEX2D(xy + vec2(2.0 * one.x, 0.0))) * coeffs,
		    0.0, 1.0);
  vec4 col2 = clamp(mat4(
			 TEX2D(xy + vec2(-one.x, one.y)),
			 TEX2D(xy + vec2(0.0, one.y)),
			 TEX2D(xy + one),
			 TEX2D(xy + vec2(2.0 * one.x, one.y))) * coeffs,
		    0.0, 1.0);

#ifndef LINEAR_PROCESSING
  col  = pow(col , vec4(CRTgamma));
  col2 = pow(col2, vec4(CRTgamma));
#endif

  // Calculate the influence of the current and next scanlines on
  // the current pixel.
  vec4 weights  = scanlineWeights(uv_ratio.y, col);
  vec4 weights2 = scanlineWeights(1.0 - uv_ratio.y, col2);
#ifdef OVERSAMPLE
  uv_ratio.y =uv_ratio.y+1.0/3.0*filter_;
  weights = (weights+scanlineWeights(uv_ratio.y, col))/3.0;
  weights2=(weights2+scanlineWeights(abs(1.0-uv_ratio.y), col2))/3.0;
  uv_ratio.y =uv_ratio.y-2.0/3.0*filter_;
  weights=weights+scanlineWeights(abs(uv_ratio.y), col)/3.0;
  weights2=weights2+scanlineWeights(abs(1.0-uv_ratio.y), col2)/3.0;
#endif
  vec3 mul_res  = (col * weights + col2 * weights2).rgb * vec3(cval);

  // dot-mask emulation:
  // Output pixels are alternately tinted green and magenta.
  vec3 dotMaskWeights = mix(
          vec3(1.0, 0.7, 1.0),
          vec3(0.7, 1.0, 0.7),
          floor(mod(texCoord.x*params.OutputSize.x, 2.0))
      );
					
  mul_res *= dotMaskWeights;

  // Convert the image gamma for display on our output device.
  mul_res = pow(mul_res, vec3(1.0 / monitorgamma));

  // Color the texel.
  FragColor = vec4(mul_res, 1.0);
}