slang-shaders/bezel/koko-aio/shaders/config.inc

	// Uncomment this to improve bezel downscaling.
	// If you are using standard bezel, leave commented to gain performance.
//#define STATIC_BEZEL_USE_MIPMAP 1.0

	//Consider content interlaced if lines are more than this
#define MIN_LINES_INTERLACED 380

	//Sort of dithering/debanding used in vignette, spot, backlight leds
#define NOISEPOWER 1/192.0
//((params.OutputSize.z)*3)

	//If you change the default bezel texture, you may have to edit this to
	//align bezel reflections and game content. (it seems to depend on the curvature amount)
#define BEZEL_BORDER_SIZE 0.197

	//The maximum radius of the reflection blur. //3.3..4.0 max
#define BEZEL_REFL_BLUR_MAX 4.0

	// Define the size and the smoothness of the rectangle 
	// in the bezel corners that will hide and blur the reflections 
#define BEZEL_REFL_CORNER_BLANK_SIZE 0.0685
#define BEZEL_REFL_CORNER_BLANK_SHADE 0.05  // keep it > 0.0

	//Bezel reflection warping (curvature) may need a correction factor.
	//Modify this if bezel reflections does not follow the border
#define BEZEL_REFL_WARP_CORRECTION_FACTOR 1.9

	// 0.0-1.0: sensitivity to scene change (ambilike stuff), 0.0 changes more
#define AMBI_SCENE_CHG_THRSHLD 0.07  
	// The following will allow to sample at reduced interval
	// The scene change detection logic will take advantage of it
	// So that quick fades will still be treated as scene changes
#define AMBI_AVGLUM_DIVIDER 4

	// The following defines the speed of the color fades 
	// when changing scene. (range 0..1)
	// It is wise to correlate it with avglum_divider
	// try between (1/avglum_divider) and (1/avglum_divider)/3
//#define AMBI_FAST_STEP 0.125 
#define AMBI_FAST_STEP 0.25

	//Setting the glow/halo sharpness parameter to this
	//will skip the blurring phase and lowers the gpu use
	//Set this to the same value as used for the maximum
	//of IN_GLOW_W/H, HALO_W/H
#define GLOW_SHARP_MAX 7	        

	//Minumum glow sharpness
	//I set this to allow negative values for glow sharpness
	//that will calc their values from light spread amount
#define MIN_IN_GLOW_SHARP 0.5

	//Setting glow to blur bias parameter to this
	//will skip the glow/blur mix codem and just return
	//the blurred image
	//Set this to the same value as used for the maximum
	//of IN_GLOW_BIAS
#define IN_GLOW_BIAS_MAX 1.0

	//Try to keep blur sizes consistent across input resolutions
#define SCALEMOD_X 360
#define SCALEMOD_Y 270
#define NEW_SCALEMOD_X (params.OriginalSize.x/360.0 / 2.2)
#define NEW_SCALEMOD_Y (params.OriginalSize.y/270.0 / 2.2)

   // When Glow sharpness is controlled by light spread amount
   // The following ratio is used, the lower, the blurrier:
#define IN_GLOW_SHARPNESS_SPREAD_RATIO_W 0.8334
#define IN_GLOW_SHARPNESS_SPREAD_RATIO_H 2.0


	//Support for backdrops has to be enable by uncommenting:
//#define STATIC_SUPPORT_BACKDROP 1.0
#define BACKDROP_OFFX 0.0
#define BACKDROP_OFFY 0.0
#define BACKDROP_ZOOM 1.0





#define eps 1e-5
#define pi  3.141592653589793
#define TAU 6.28318530717958647693
#define alpha_mark 0.1


layout(push_constant) uniform Push {
	vec4 SourceSize;
	vec4 OriginalSize;
	vec4 OutputSize;
	vec4 final_passSize;
	uint FrameCount;

	float SCANLINE_DARK;
	float VMASK_OVERWHITE ;
	float VMASK_DARKLINE_SCALE;
	float VMASK_GAP;
	float VMASK_USE_GM;
	float DRKLN_OVERWHITE ;
	float DARKLINES_VOFFSET ;
	float DARKLINES_PERIOD ;
	float HALO_W ;
	float HALO_H ;
	float HALO_POWER ;
	float HALO_GAMMA ;
	float HALO_VS_SCAN ;
	float DO_BLOOM ; //4
 	float BLOOM_QUALITY ; //1

} params;

layout(std140, set = 0, binding = 0) uniform UBO {
	mat4 MVP;
	
	vec4 FinalViewportSize;
	vec4 in_glow_passSize;
	vec4 FXAA_passSize;
	//vec4 main_passSize;
	//vec4 monitor_bodySize;
	//vec4 bgSize;
	vec4 avglum_passSize;
	vec4 first_passSize;
	vec4 ntsc_passSize;

	float DO_SCANLINES;
	float DO_IN_GLOW;
	float DO_VMASK_AND_DARKLINES ;
	float MASK_COMPENSATION ;
	float DO_HALO ;
	float DO_CCORRECTION;
	float DO_ALT_BLANK;
	float IN_GLOW_BIAS ;
	float IN_GLOW_SPREAD ;
	float SCANLINES_BLEEDING ;
	float IN_GLOW_W;
	float IN_GLOW_H;
	float IN_GLOW_POWER;
	float IN_GLOW_GAMMA;
	float IN_GLOW_NTSC_ARTF_MULT;
	float IN_GLOW_NTSC_ARTF_TRSH;
	float IN_GLOW_SHOW_ARTF_MASK;
	float BLOOM_MIX;
	float BLOOM_EYE_ADPT_SRT;
	float BLOOM_EYE_INERTIA;
 	float BLOOM_SIZE;
	float BLOOM_GAMMA;
	float BLOOM_BYPASS;
	float BLOOM_POWER;
	float BLOOM_OVER_WHITE;
  	float BLOOM_GAMMA_OUT;
  	float ALT_BLANK_STRENGTH;
  	float ALT_BLANK_PERIOD;
	float DO_FXAA;
	float DO_SAT_BLEED;
	float SAT_BLEED_SIZE_LEFT;
	float SAT_BLEED_SIZE_RIGHT;
	float SAT_BLEED_FALLOFF;
	float SAT_BLEED_STRENGTH;
	float SAT_BLEED_PAL;
	float DO_NTSC_ARTIFACTS;
	float NTSC_FILTER_WIDTH;
	float NTSC_FILTER_SCF;
	float NTSC_FILTER_FC;
	float NTSC_MIX;
	float NTSC_PHASE_SHIFT;
	//float NTSC_DOT_CRAWL;
	float SCANLINE_FLICKERING ; //2
	float SCANLINE_FLICKERING_POWER;
	float SCANLINE_DISABLE_ON_INTERLACE;
	float SCANLINE_COMPENSATION;
	float SCANLINE_SM_STRENGTH;
	float SCANLINE_SM_TYPE;
	float SCANLINE_SM_VOFFSET;
	float SCANLINE_MIN;
	float SCANLINE_MAX;
	float RGB_MASK_STRENGTH;
	float DARKLINES_STRENGTH;
	float GAMMA_OUT ; //1
	float SATURATION;
	float LUMINANCE;
	float CONTRAST;
	float BRIGHTNESS;
	float TEMPERATURE;
	
	float DO_CURVATURE;

	float GEOM_WARP_X;
	float GEOM_WARP_Y;
	float GEOM_CORNER_SIZE;
	float GEOM_CORNER_SMOOTH;

	float DO_BEZEL;
	float BEZEL_R;
	float BEZEL_G;
	float BEZEL_B;
	float BEZEL_CON;
	float BEZEL_INNER_ZOOM;
	float BEZEL_IMAGE_BORDER;
	float BEZEL_FRAME_ZOOM;
	float BEZEL_USE_STRAIGHT;
	float BEZEL_RFL_BLR_SHD;
	float BEZEL_RFL_OFFSET;
	float BEZEL_REFL_ZOOM;
	float BEZEL_REFL_STRENGTH;

	float DO_SPOT;
	float S_POSITION; 
	float S_SIZE;
	float S_POWER;

	float DO_VIGNETTE;
	float V_SIZE;
	float V_POWER;

	float DO_DYNZOOM;
	float DYNZOOM_FACTOR;
	
	float DO_AMBILIGHT;
	float AMBI_FALLOFF;
	float AMBI_POWER;
	float AMBI_OVER_BEZEL;
	float ASPECT_X;
	float ASPECT_Y;
	float AMBI_STEPS;
	
	float DO_BG_IMAGE;
	float BG_IMAGE_OVER;
	float BG_IMAGE_OFFY;
	float BG_IMAGE_OFFX;
	float BG_IMAGE_ZOOM;
	float BG_IMAGE_ROTATION;
	float BG_IMAGE_WRAP_MODE;

	float DO_SHIFT_RGB;
	float SHIFT_R;
	float SHIFT_G;
	float SHIFT_B;
	float OFFSET_STRENGTH;
	
	float DO_GLOBAL_SHZO;
	float GLOBAL_ZOOM;
	float GLOBAL_OFFX;
	float GLOBAL_OFFY;

	float DO_RF_NOISE;
	float RF_NOISE_STRENGTH;
	
} global;

// Color correction
#pragma parameter DO_CCORRECTION "★ Color corrections enable? ==>" 		0.0 	0.0 1.0 1.0
#pragma parameter LUMINANCE       "        Luminance push (>1.0=clip)"		0.0	 0.0 1.5 0.05
#pragma parameter SATURATION     "        Saturation in   (1.0=off)"		1.0	0.0  2.0 0.01
#pragma parameter CONTRAST       "        Contrast in     (0.0=off)"		0.0	-1.0 1.0 0.01
#pragma parameter BRIGHTNESS     "        Brightness in   (0.0=off)"		0.0	-1.0 1.0 0.01
#pragma parameter TEMPERATURE    "        Temperature in (6500=off)"		6500.0	3000 10000.0 50.0
#pragma parameter GAMMA_OUT      "        Gamma out"				0.69	0.1 	9.0  0.025
#pragma parameter BLANK1 " " 0.0 0.0 1.0 1.0



// FXAA
// Apply an antialiasing filter via FXAA from Nvidia.
#pragma parameter DO_FXAA "★ FXAA enable? ==>"	0.0 	0.0 1.0 1.0
#pragma parameter BLANK2 " " 0.0 0.0 1.0 1.0



// NTSC color artifacting
#pragma parameter DO_NTSC_ARTIFACTS "★ CVBS: NTSC color artifacts enable? ==>"	0.0 	0.0 1.0 1.0
#pragma parameter NTSC_FILTER_WIDTH "        Filter width"			17.0	5.0 21.0 4.0
#pragma parameter NTSC_FILTER_SCF   "        Subcarrier Frequency"		5.30	0.0 10.0 0.01
#pragma parameter NTSC_FILTER_FC    "        Frequency cutoff"			2.5	0.0 10.0 0.1
#pragma parameter NTSC_PHASE_SHIFT  "        Phase shift"			0.0	0.0 1.0  1.0
#pragma parameter NTSC_MIX          "        Strength"				0.5	0.0 3.0  0.1
#pragma parameter BLANK3 " " 0.0 0.0 1.0 1.0



// RF Noise
#pragma parameter DO_RF_NOISE	 "★ RF Noise enable? ==>"			0.0 	0.0  1.0     1.0
#pragma parameter RF_NOISE_STRENGTH "        Strength"				0.05	0.0 1.0 0.005
#pragma parameter BLANK4 " " 0.0 0.0 1.0 1.0



// YIQ/YUV bandwidth limited chroma bleeding and NTSC color artifacts.
#pragma parameter DO_SAT_BLEED "★ CVBS: Bandwidth limited chroma enable? ==>"	0.0 	0.0 1.0 1.0
#pragma parameter SAT_BLEED_PAL           "        Use PAL colorspace, not NTSC"	0.0 	 0.0 1.0 1.0
#pragma parameter SAT_BLEED_STRENGTH      "        Strength"				1.0	 0.0 5.0  0.01
#pragma parameter SAT_BLEED_SIZE_LEFT     "        Size Left"				5.0 	 1.0 40.0  1.0
#pragma parameter SAT_BLEED_SIZE_RIGHT    "        Size Right"				5.0 	 1.0 40.0  1.0
#pragma parameter SAT_BLEED_FALLOFF  	  "        Falloff"				1.7 	 1.0 2.0 0.01
#pragma parameter BLANK5 " " 0.0 0.0 1.0 1.0



//Offset RGB
#pragma parameter DO_SHIFT_RGB       "★ RGB deconvergence enable? (bad with FXAA) ==>"	0.0	 0.0 1.0 1.0
#pragma parameter OFFSET_STRENGTH "        Strength"			0.6 	 0.0 1.0 0.05
#pragma parameter SHIFT_R         "        Red offset"			-40.0 	-210.0 189.0 1
#pragma parameter SHIFT_G         "        Green offset"		2.0 	-210.0 189.0 1
#pragma parameter SHIFT_B         "        Blue offset"			40.0 	-210.0 189.0 1
#pragma parameter BLANK6 " " 0.0 0.0 1.0 1.0



// Input Blur / light glowing
#pragma parameter DO_IN_GLOW               "★ Glow/Blur enable? ==>"	 					0.0	0.0 1.0 1.0
#pragma parameter IN_GLOW_POWER            "        Input signal strength"					1.0 	0.0 5.0 0.05
#pragma parameter IN_GLOW_GAMMA            "        Input gamma, the higher, the less glow on dark colors"	1.0 	1.0 10.0 0.1
#pragma parameter IN_GLOW_SPREAD           "        Glow spread amount"						0.6 	0.0 4.0 0.05
#pragma parameter IN_GLOW_W                "        Sharpness X (0 = controlled by glow spread)"		2.5	0.0 7.0 0.05
#pragma parameter IN_GLOW_H                "        Sharpness Y (0 = controlled by glow spread)"		2.5	0.0 7.0 0.05
#pragma parameter IN_GLOW_BIAS             "        Glow to blur bias"					    	1.0     0.0 1.0 0.05
#pragma parameter IN_GLOW_NTSC_ARTF_MULT   "        Blur NTSC artifacts more"					0.0	0.0 8.0 0.1
#pragma parameter IN_GLOW_NTSC_ARTF_TRSH   "        Blur less NTSC artifacts (min treshold)"			1.0	0.0 1.0 0.05
#pragma parameter IN_GLOW_SHOW_ARTF_MASK   "        Show NTSC artifacts mask (debug)"				0.0	0.0 1.0 1.0
#pragma parameter BLANK7 " " 0.0 0.0 1.0 1.0



// Mask
#pragma parameter DO_VMASK_AND_DARKLINES "★  RGB Masks and/or Darklines enable? ==>"         		0.0 	0.0 1.0 1.0
#pragma parameter MASK_COMPENSATION      "        Compensate for brightness loss"			0.0 	0.0 1.0 0.05
#pragma parameter VMASK_DARKLINE_SCALE   "        (HiDPI) Vmask and Darklines multiplier"		1.0  	1.0 4.0 1.0
#pragma parameter RGB_MASK_STRENGTH      "        RGB Mask Strength (0.0 to disable)"			0.75  	0.0 1.0 0.05
#pragma parameter VMASK_USE_GM           "           . (LoDPI) Green,Magenta -> BGR"			0.0  	0.0 1.0 1.0
#pragma parameter VMASK_GAP              "           . Horizontal Gap between triads:"			0.0  	0.0 1.0 1.0
#pragma parameter VMASK_OVERWHITE        "           . Affect bright colors"				1.0 	0.0 1.0 0.05

#pragma parameter DARKLINES_STRENGTH     "        Darklines strength (0.0 to disable)"				0.65 	0.0 1.0   0.05
#pragma parameter DARKLINES_VOFFSET      "           . Offset"							1.0 	0.0 1.0   1.0
#pragma parameter DARKLINES_PERIOD       "           . Height"							2.0 	2.0 16.0  2.0
#pragma parameter DRKLN_OVERWHITE        "           . Affect bright colors"					1.0 	0.0 1.0   0.05
#pragma parameter BLANK9 " " 0.0 0.0 1.0 1.0



// Halo
#pragma parameter DO_HALO       "★ Halo enable? ==>" 						0.0	0.0 1.0 1.0
#pragma parameter HALO_POWER    "        Strength"						0.9 	0.0  5.0 0.025
#pragma parameter HALO_W        "        Sharpness, horizontal"					1.75	0.35  7.0 0.05
#pragma parameter HALO_H        "        Sharpness, Vertical"					1.75	0.35  7.0 0.05
#pragma parameter HALO_GAMMA    "        Gamma, the higher, the less the halo on dark colors"	2.0 	1.0  10.0 0.1
#pragma parameter HALO_VS_SCAN  "        Light up scanlines gaps too"				0.0	0.0  1.0  0.1
#pragma parameter BLANK10 " " 0.0 0.0 1.0 1.0



// Scanlines
#pragma parameter DO_SCANLINES	         "★ Scanlines enable? ==>"						0.0 	0.0  1.0 1.0
#pragma parameter SCANLINE_MIN          "        Minimum height"			  		1.0 	0.05 1.0 0.05
#pragma parameter SCANLINE_MAX          "        Maximum height"			  		1.0 	0.05 25.0 0.1
#pragma parameter SCANLINE_DARK          "        Gap brightness"			  		0.0 	-0.5 1.0 0.05
#pragma parameter SCANLINE_COMPENSATION  "        Compensate for brightness loss"				0.0	0.0 1.0 0.1
#pragma parameter SCANLINES_BLEEDING     "        Scanlines bleeding"						0.0 	0.0 3.0 0.05
#pragma parameter SCANLINE_FLICKERING    "        Interlace Flicker (0=off,1=on,2=if interlaced)"		2.0 	0.0 2.0 1.0
#pragma parameter SCANLINE_FLICKERING_POWER     "        Interlace Flicker power"		  		0.75 	0.0 4.0 0.1
#pragma parameter SCANLINE_DISABLE_ON_INTERLACE "        Disable on interlaced screen"			  	0.0 	0.0 1.0 1.0
#pragma parameter BLANK11 " " 0.0 0.0 1.0 1.0

#pragma parameter SCANLINE_SM_TYPE         "        Slotmask type (disable (0) with darklines!)"		0.0 	0.0 3.0 1.0
#pragma parameter SCANLINE_SM_STRENGTH     "           . Slotmask strength (type 1 and 2 only)"			1.0 	0.0 1.0 0.05
#pragma parameter SCANLINE_SM_VOFFSET      "           . Offset (type 1 only)"					45.0 	0.0 158.0 1.0
#pragma parameter BLANK12 " " 0.0 0.0 1.0 1.0

//p1.20,r2.0
// Bloom
#pragma parameter DO_BLOOM           "★ Bloom enable? ==>" 						0.0  0.0  1.0  1.0
#pragma parameter BLOOM_MIX          "        Final mix, (0.0=off)"					0.45 0.0 1.0  0.01
#pragma parameter BLOOM_SIZE         "        Radius"							4.0  0.25 30.0 0.25
#pragma parameter BLOOM_QUALITY      "        Quality: more is better but slower"			1.0  1.0 8.0 1.0
#pragma parameter BLOOM_GAMMA        "        Gamma in (threshold)"					8.0  1.0 10.0 0.5
#pragma parameter BLOOM_GAMMA_OUT    "        Gamma out (contour smoothness)"				1.0  0.1 10.0 0.1
#pragma parameter BLOOM_POWER        "        Power multiplier"						1.20  1.0 20.0 0.05  
#pragma parameter BLOOM_EYE_ADPT_SRT "        Modulate: Local exposure eye adaption strength"		0.45   0.0 10.0 0.05
#pragma parameter BLOOM_EYE_INERTIA  "        Modulate: Time before eye adaption starts"		1500  10.0 10000 50.0
#pragma parameter BLOOM_OVER_WHITE   "        Modulate: Strength on bright areas (0 = aura)"		0.5  0.0 1.0  0.05
#pragma parameter BLOOM_BYPASS       "        Bypass/Solo (1=Unmodulated, 2=Modulated)"			0.0  0.0 2.0  1.0
#pragma parameter BLANK13 " " 0.0 0.0 1.0 1.0



//Curvature parameters:
#pragma parameter DO_CURVATURE	     "★ Curvature enable? ==>"			0.0   0.0 1.0 1.0
#pragma parameter GEOM_WARP_X        "        Warp X"				0.3  0.0 6.0 0.025
#pragma parameter GEOM_WARP_Y        "        Warp Y"				0.0   0.0 6.0 0.025
#pragma parameter GEOM_CORNER_SIZE   "        Corner radius"			0.005  0.005 0.1 0.001
#pragma parameter GEOM_CORNER_SMOOTH "        Corner sharpness"			350.0 15.0 1000.0 1.0
#pragma parameter BLANK14 " " 0.0 0.0 1.0 1.0



//Bezel related
#pragma parameter DO_BEZEL	      "★ Bezel enable? ==>"		0.0   0.0 1.0 1.0
#pragma parameter BEZEL_USE_STRAIGHT  "        Straight"			0.0	0.0 1.0  1.0 
#pragma parameter BEZEL_R             "        Color: Red"		-0.3   -0.5 0.5  0.01
#pragma parameter BEZEL_G             "        Color: Green"		-0.3   -0.5 0.5  0.01
#pragma parameter BEZEL_B             "        Color: Blue"		-0.3   -0.5 0.5  0.01
#pragma parameter BEZEL_CON           "        Contrast"			1.3   0.0  10.0 0.01
#pragma parameter BEZEL_INNER_ZOOM    "        Image zoom"		-0.18   -1.5 0.5 0.005
#pragma parameter BEZEL_FRAME_ZOOM    "        Frame zoom"		0.0   -1.5 0.5 0.005
#pragma parameter BEZEL_IMAGE_BORDER  "        Image border"		1.01   1.0 1.2 0.01
#pragma parameter BEZEL_REFL_STRENGTH "        Reflection strength"	0.5    0.0 1.0 0.01
#pragma parameter BEZEL_RFL_BLR_SHD   "        Sharp reflections"	0.0    -1.0 1.0 0.1
#pragma parameter BEZEL_RFL_OFFSET    "        Align reflections: offset"	0.003    -0.01 0.01 0.001
#pragma parameter BEZEL_REFL_ZOOM     "        Align reflections: zoom"		0.98    0.8 1.2 0.001


#pragma parameter BLANK15 " " 0.0 0.0 1.0 1.0



//Background Image
#pragma parameter DO_BG_IMAGE	     "★ Backgound image enable? ==>"				 0.0  0.0  1.0     1.0
#pragma parameter LABEL_WARNING1     "    ⚠ RetroArch aspect needs to be set to Full! ⚠"	 1.0  1.0  1.0     1.0
#pragma parameter BG_IMAGE_OVER	     "        Image over content (alpha channel driven)?"	 0.0  0.0  1.0     1.0
#pragma parameter BG_IMAGE_OFFX	     "        Shift Image over X axis"				 0.0  -1.0  1.0    0.0005
#pragma parameter BG_IMAGE_OFFY	     "        Shift Image over Y axis"				 0.0  -1.0  1.0    0.0005
#pragma parameter BG_IMAGE_ZOOM	     "        Zoom Image"					 1.0  -1.0  3.0    0.0005
#pragma parameter BG_IMAGE_ROTATION  "        Rotate image mode (-1 for auto)"	     		 -1.0  -1.0  2.0    1.0
#pragma parameter BG_IMAGE_WRAP_MODE "        Wrap mode: default, clamp to border, edge, repeat" 0.0  0.0    3.0    1.0
#pragma parameter BLANK16 " " 0.0 0.0 1.0 1.0



//Back leds
//Emulates leds under the monitor frame that slowly reacts to image contents
#pragma parameter DO_AMBILIGHT	  "★ Ambient light leds enable? ==> "					1.0  0.0  1.0     1.0
#pragma parameter LABEL_WARNING3  "    ⚠ RetroArch aspect needs to be set to Full! ⚠"			1.0  1.0  1.0     1.0
#pragma parameter AMBI_STEPS	  "        Slowness"							60.0 5.0  1000.0  5.0
#pragma parameter AMBI_FALLOFF    "        Light Falloff"						0.7  0.1  3.0     0.01
#pragma parameter AMBI_POWER      "        Led power"							1.5  1.0  7.0     0.05
#pragma parameter AMBI_OVER_BEZEL "        Colorize Bezel"						0.1 0.0 1.0     0.01
#pragma parameter BLANK17 " " 0.0 0.0 1.0 1.0



//Full screen glowing
//Modulate the image zooming depending on the image luminosity.
//You can lower the effect power through the DYNZOOM_FACTOR parameter.
#pragma parameter DO_DYNZOOM	     "★ Luminosity dependant zoom enable? ==>"		1.0   0.0   1.0  1.0
#pragma parameter DYNZOOM_FACTOR     "        Narrowness"				80.0  15.0  120.0 0.5
#pragma parameter BLANK18 " " 0.0 0.0 1.0 1.0



//Vignette and spot
#pragma parameter DO_VIGNETTE	"★ Vignette enable? ==>"	0.0  0.0  1.0  1.0
#pragma parameter V_SIZE	"        Size"			1.7  0.0  5.0  0.05
#pragma parameter V_POWER	"        Power"			1.1  0.05 2.0  0.01

#pragma parameter DO_SPOT	"★ Spot enable? ==>"		0.0   0.0   1.0 1.0
#pragma parameter S_POSITION 	"        Position"		0.0   -420.0 378.0 1
#pragma parameter S_SIZE	"        Size"			0.4   0.0   1.0 0.01
#pragma parameter S_POWER	"        Power" 		0.1   0.05  2.0 0.01
#pragma parameter BLANK19 " " 0.0 0.0 1.0 1.0



// Alternative blanking
#pragma parameter DO_ALT_BLANK       "★ Alternate line blanking enable? ==>"			0.0 0.0 1.0 1.0
#pragma parameter ALT_BLANK_STRENGTH "        Alternate black frame insertion strength" 	0.5 0.0 1.0 0.1
#pragma parameter ALT_BLANK_PERIOD   "        Blank lines period" 				4.0 0.0 20.0 1.0
#pragma parameter BLANK20 " " 0.0 0.0 1.0 1.0



//Global Zoom/Offset
#pragma parameter DO_GLOBAL_SHZO	 "★ Global shift/zoom"			0.0   0.0  1.0 	  1.0
#pragma parameter GLOBAL_OFFX	 "        X axis shift "			0.0  -1.0  1.0    0.0005
#pragma parameter GLOBAL_OFFY	 "        Y axis shift "			0.0  -1.0  1.0    0.0005
#pragma parameter GLOBAL_ZOOM	 "        Zoom"					2.0   0.0  3.0    0.0005
#pragma parameter BLANK21 " " 0.0 0.0 1.0 1.0



//Aspect Ratio
#pragma parameter label_ar	 "★ Aspect Ratio "							0.0  0.0  1.0     1.0
#pragma parameter ASPECT_X       "        Aspect Ratio Numerator (<=0 for a preset)"   		0.0  -6.0 256. 1.0
#pragma parameter ASPECT_Y       "        Aspect Ratio Denominator"	  				3.0   0.0 256. 1.0
#pragma parameter BLANK22 " " 0.0 0.0 1.0 1.0
#pragma parameter label_aspect_presets "        Presets reference list:" 0.0 0.0 0.0 1.0
#pragma parameter label_aspect_preset0 "          (0 =  MAME 1.33)" 0.0 0.0 0.0 1.0
#pragma parameter label_aspect_preset1 "          (-1 = NTSC 1.5)" 0.0 0.0 0.0 1.0
#pragma parameter label_aspect_preset2 "          (-2 = PAL 1.25)" 0.0 0.0 0.0 1.0
#pragma parameter label_aspect_preset3 "          (-3 = Snes 8/7)" 0.0 0.0 0.0 1.0
#pragma parameter label_aspect_preset4 "          (-4 = Megadrive 10/7)" 0.0 0.0 0.0 1.0
#pragma parameter label_aspect_preset5 "          (-5 = Uncorrected)" 0.0 0.0 0.0 1.0
#pragma parameter label_aspect_preset6 "          (-6 = MAME rotated/TATE 0.75)" 0.0 0.0 0.0 1.0



#include "config.globals.inc"