swayfx/sway/sway.5.txt

/////
vim:set ts=4 sw=4 tw=82 noet:
/////
sway (5)
========

Name
----
sway - configuration file and commands

Description
-----------

A sway configuration file is a list of sway commands that are executed by sway
on startup.  These commands usually consist of setting your preferences and
setting key bindings. An example config is likely present in /etc/sway/config
for you to check out.

Lines in the configuration file might be extended through multiple lines by
adding a '\' character at the end of line. e.g.:

	bindsym Shift+XF86AudioRaiseVolume exec pactl set-sink-volume \
		$(pactl list sinks | grep -B 1 RUNNING | sed '1q;d' | sed 's/[^0-9]\+//g') +5%

These commands can be executed in your config file, via **swaymsg**(1), or via
the bindsym command.

Commands
--------

The following commands may only be used in the configuration file.

**bar** <block of commands>::
	Append _{_ to this command, the following lines will be commands that
	configure **swaybar**, and _}_ on its own line to close the block.
	+
	See **sway-bar**(5) for details.

**set** <name> <value>::
	Sets variable $name to _value_. You can use the new variable in the arguments
	of future commands.

The following commands cannot be used directly in the configuration file.
They are expected to be used with **bindsym** or at runtime through **swaymsg**(1).

**border** <normal|pixel> [<n>]::
	Set border style for focused window. _normal_ includes a border of thickness
	_n_ and a title bar. _pixel_ is a border without title bar _n_ pixels thick.
	Default is _normal_ with border thickness 2.

**border** <none|toggle>::
	Set border style for focused window to _none_ or _toggle_ between the
	available border styles: _normal_, _pixel_, _none_.

**exit**::
	Exit sway and end your Wayland session.

**floating** <enable|disable|toggle>::
	Make focused view floating, non-floating, or the opposite of what it is now.

**focus** <direction>::
	Direction may be one of _up_, _down_, _left_, _right_, or _parent_. The
	directional focus commands will move the focus in that direction. The parent
	focus command will change the focus to the parent of the currently focused
	container, which is useful, for example, to open a sibling of the parent
	container, or to move the entire container around.

**focus** output <direction|name>::
	Direction may be one of _up_, _down_, _left_, _right_. The directional focus
	commands will move the focus to the output in that direction. When name is
	given the focus is changed to the output with that name.

**focus** mode_toggle::
	Toggles focus between floating view and tiled view.

**fullscreen**::
	Toggles fullscreen status for the focused view.

**layout** <mode>::
	Sets the layout mode of the focused container. _mode_ can be one of _splith_,
	_splitv_, _toggle split_, _stacking_ or _tabbed_.

**move** <left|right|up|down>::
	Moves the focused container _left_, _right_, _up_, or _down_.

**move** <container|window> to workspace <name>::
	Moves the focused container to the workspace identified by _name_.
	_name_ may be a special workspace name. See **workspace**.

**move** <container|window|workspace> to output <name|direction>::
	Moves the focused container or workspace to the output identified by _name_ or
	_direction_. _direction_ may be one of _up_, _down_, _left_, _right_.

**reload**::
	Reloads the sway config file without restarting sway.

**resize** <shrink|grow> <width|height> <amount>::
	Resizes the currently focused container or view by _amount_. _amount_ can be
	specified as "n px" or "n ppt" or "n px or n ppt".

**resize** <width|height> <amount>::
	Sets the _width_ or _height_ of the currently focused container to _amount_.
	_amount_ can be specified as "n px" or "n ppt" or "n px or n ppt".

**split** <vertical|v|horizontal|h|toggle|t>::
	Splits the current container, vertically or horizontally. If toggled then the
	current container is split opposite to the parent container.

**splith**::
	Equivalent to **split horizontal**.

**splitv**::
	Equivalent to **split vertical**.

**splitt**::
	Equivalent to **split toggle**.

**sticky** <enable|disable|toggle>::
	"Sticks" a floating window to the current output so that it shows up on all
	workspaces.

The following commands may be used either in the configuration file
or triggered at runtime.

**assign** <criteria> [→] <workspace>::
	Assigns views matching _criteria_ (see **Criteria** section below) to
	_workspace_. The → (U+2192) is optional and purely for aesthetics. This
	command is exactly equivalent to "for_window <criteria> move container to
	workspace <workspace>".

**bindsym** <key combo> <command>::
	Binds _key combo_ to execute _command_ when pressed. You may use XKB key
	names here (**xev**(1) is a good tool for discovering them). An example
	bindsym command would be **bindsym Mod1+Shift+f exec firefox**, which would
	execute Firefox if the alt, shift, and F keys are pressed together. Any
	valid sway command is eligible to be bound to a key combo.
	+
	**bindcode** <code> <command> is also available for binding with key codes
	instead of key names.

**client**.<color_class> <border> <background> <text> <indicator> <child_border>::
	The client commands control the colors of the view borders and title bars. All
	of the client commands _require_ five color values. (The one exception is
	**client.background** which _requires_ one color value.) If you only want to
	specify a subset, supply default colors for all the others. Colors must be
	defined in hex. i.e. _#rrggbb_ or _#rrggbbaa_ when including the alpha
	channel.
	+
	The command tokens are:
		**color_class**::: Specifies the view to which the colors apply.
			**client.background**:::: The color a view will be painted, underneath the
			client itself. This will only be visible if a client does not fully
			cover its allocated view space. This command only requires one color. _Note_:
			This is not currently implemented.
			**client.focused**:::: The view that has focus.
			**client.focused_inactive**:::: A view that has focus within its
			container, but the container is not focused.
			**client.placeholder**:::: Used when drawing placeholder view contents.
			Only background and text colors are used. _Note_: This is not
			currently implemented.
			**client.unfocused**:::: A view that does not have focus.
			**client.urgent**:::: A view with an urgency hint. _Note_: This is not
			currently implemented.
		**border**::: The border around the title bar.
		**background**::: The background of the title bar.
		**text**::: The text color of the title bar.
		**indicator**::: The color used to indicate where a new view will open. In a
		tiled container, this would paint the right border of the current view if
		a new view would be opened to the right. _Note_: This is not currently
		implemented.
		**child_border**::: The border around the view itself.

+
The default colors are:
+
--
[options="header"]
|===========================================================================
|color_class      |border    |background |text      |indicator |child_border
|background       |n/a       |#ffffff  |n/a       |n/a       |n/a
|focused          |#4c7899 |#285577  |#ffffff |#2e9ef4 |#285577
|focused_inactive |#333333 |#5f676a  |#ffffff |#484e50 |#5f676a
|unfocused        |#333333 |#222222  |#888888 |#292d2e |#222222
|urgent           |#2f343a |#900000  |#ffffff |#900000 |#900000
|placeholder      |#000000 |#0c0c0c  |#ffffff |#000000 |#0c0c0c
|===========================================================================
--

**debuglog** <on|off|toggle>::
	Enables, disables or toggles debug logging. The toggle argument cannot be used
	in the configuration file.

**exec** <shell command>::
	Executes _shell command_ with sh.

**exec_always** <shell command>::
	Like exec, but the shell command will be executed _again_ after *reload* or
	*restart* is executed.

**floating_maximum_size** <width> x <height>::
	Specifies the maximum dimensions of floating windows.
	Uses the container dimensions as default.
	-1 x -1 will remove any restriction on dimentions.
	0 x 0 has the same behavior as not setting any value.
	If in conflict this option has precedence over floating_minimum_size.

**floating_minimum_size** <width> x <height>::
	Specifies the minimum dimensions of floating windows.
	Default parameters are 75 x 50.
	-1 and 0 are invalid parameters, default will be used instead.

**floating_modifier** <modifier> [normal|inverse]::
	When the _modifier_ key is held down, you may hold left click to move floating
	windows, and right click to resize them. Unlike i3, this modifier may also be
	used to resize and move windows that are tiled. With the _inverse_ mode
	enabled, left click is used for resizing and right click for dragging. The
	mode paramenter is optional and defaults to _normal_ if it isn't defined.

**floating_scroll** <up|down|left|right> [command]::
	Sets a command to be executed when the mouse wheel is scrolled in the
	specified direction while holding the floating modifier. Resets the command,
	when given no arguments.

**focus_follows_mouse** <yes|no>::
	If set to _yes_, moving your mouse over a window will focus that window.

**for_window** <criteria> <command>::
	Whenever a window that matches _criteria_ appears, run list of commands. See
	**Criteria** section below.

**gaps** edge_gaps <on|off|toggle>::
	Whether or not to add gaps between views and workspace edges if amount of
	inner gap is not zero. When _no_, no gap is added where the view is aligned to
	the workspace edge, effectively creating gaps only between views. The toggle
	argument cannot be used in the configuration file.

**gaps** <amount>::
	Sets default _amount_ pixels as the gap between each view, and around each
	workspace.

**gaps** <inner|outer> <amount>::
	Sets default _amount_ pixels as the _inner_ or _outer_ gap, where the former
	affects spacing between views and the latter affects the space around each
	workspace.

**gaps** <inner|outer> <all|workspace|current> <set|plus|minus> <amount>::
	Changes the gaps for the _inner_ or _outer_ gap. _all_ changes the gaps for
	all views or workspace, _workspace_ changes gaps for all views in current
	workspace (or current workspace), and _current_ changes gaps for the current
	view or workspace.

**hide_edge_borders** <none|vertical|horizontal|both>::
	Hide window borders adjacent to the screen edges. Default is _none_.

**input** <input device> <block of commands>::
	Append _{_ to this command, the following lines will be commands to configure
	the named input device, and _}_ on its own line will close the block.
	+
	See **sway-input**(5) for details.

**smart_gaps** <on|off>::
	If smart_gaps are _on_ then gaps will only be enabled if a workspace has more
	than one child container.

**mode** <mode_name>::
	Switches to the given mode_name. the default mode is simply _default_. To
	create a new mode in config append _{_ to this command, the following lines
	will be keybinds for that mode, and _}_ on its own line to close the block.

**mouse_warping** <output|none>::
	When _output_: place mouse at center of newly focused window when changing
	output. When _none_: don't move mouse.

**new_window** <normal|none|pixel> [<n>]::
	Set default border style for new windows.

**new_float** <normal|none|pixel> [<n>]::
	Set default border style for new floating windows. This only applies to
	windows that are spawned in floating mode, not windows that become floating
	after the fact.

**output** <name> <resolution|res> <WIDTHxHEIGHT>::
	Configures the specified output to use the given resolution.
	+
	_Note_: sway does not currently support modesetting. Your output's native
	resolution will be used and the screen will be scaled from the resolution
	specified to your native resolution.

**output** <name> <position|pos> <X,Y>::
	Configures the specified output to be arranged at the given position.

**output** <name> <background|bg> <file> <mode>::
	Sets the wallpaper for the given output to the specified file, using the given
	scaling mode (one of "stretch", "fill", "fit", "center", "tile").

**output** <name> disable::
	Disables the specified output.

**NOTES FOR THE OUTPUT COMMAND**::
	You may combine output commands into one, like so:
	+
	output HDMI-A-1 res 1920x1080 pos 1920,0 bg ~/wallpaper.png stretch
	+
	You can get a list of output names like so:
	+
	swaymsg -t get_outputs
	+
	You may also match any output by using the output name "*". Be sure to add
	this output config after the others, or it will be matched instead of the
	others.

**seamless_mouse** <on|off>::
	Change output seamlessly when pointer touches edge of output. Outputs need to
	be configured with perfectly aligned adjacent positions for this option to
	have any effect.

**workspace** <name>::
	Switches to the specified workspace.

**workspace** <prev|next>::
	Switches to the next workspace on the current output or on the next output
	if currently on the last workspace.

**workspace** <prev_on_output|next_on_output>::
	Switches to the next workspace on the current output.

**workspace** <name> output <output>::
	Specifies that the workspace named _name_ should appear on the specified
	_output_.

**workspace_layout** <default|stacking|tabbed>::
	Specifies the start layout for new workspaces.

**include** <path>::
	Includes a sub config file by _path_. _path_ can be either a full path or a
	path relative to the parent config.

Criteria
--------

A criteria is a string in the form of e.g.:

	[class="[Rr]egex.*" title="some title"]

The string contains one or more (space separated) attribute/value pairs and they
are used by some commands filter which views to execute actions on. All attributes
must match for the criteria string to match.

Currently supported attributes:

**class**::
	Compare value against the window class. Can be a regular expression. If value
	is _focused_ then the window class must be the same as that of the currently
	focused window.

**id**::
	Compare value against the app id. Can be a regular expression.

**title**::
	Compare against the window title. Can be a regular expression. If value is
	_focused_ then the window title must be the same as that of the currently
	focused window.

**workspace**::
	Compare against the workspace name for this view. Can be a regular expression.
	If value is _focused_ then all the views on the currently focused workspace
	matches.

See Also
--------

**sway**(1) **sway-input**(5) **sway-bar**(5)