If a pad device for a tablet exists, reloading the configuration,
removing/reading the device or even suspending the system will recreate
the same Wayland input device multiple times.
Make sure we don't re-create the same Wayland device more than
necessary.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Remove some unnecessary brackets in an error condition check identified
during review of the shortcuts inhibitor command code (#5021).
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:
bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate
It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.
As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Adding support for the keyboard shortcuts inhibit protocol allows remote
desktop and virtualisation software to receive all keyboard input in
order to pass it through to their clients so users can fully interact
the their remote/virtual session. The software usually provides its own
key combination to release its "grab" to all keyboard input. The
inhibitor can be deactivated by the user by removing focus from the
surface using another input device such as the pointer.
Use support for the procotol in wlroots to add support to sway. Extend
the input manager with handlers for inhibitor creation and destruction
and appropriate bookkeeping. Attach the inhibitors to the seats they
apply to to avoid having to search the list of all currently existing
inhibitors on every keystroke and passing the inhibitor manager around.
Add a helper function to retrieve the inhibitor applying to the
currently focused surface of a seat, if one exists.
Extend bindsym with a flag for bindings that should be processed even if
an inhibitor is active. Conversely this disables all normal shortcuts if
an inhibitor is found for the currently focused surface in
keyboard::handle_key_event() since they don't have that flag set. Use
above helper function to determine if an inhibitor exists for the
surface that would eventually receive input.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Fix a typo in the bit mask value of the BINDING_RELOAD flag introduced
in commit 152e30c37 so it can work as intended.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
../common/log.c:63:16: error: use of undeclared identifier 'CLOCK_MONOTONIC'
clock_gettime(CLOCK_MONOTONIC, &start_time);
^
../common/log.c:75:16: error: use of undeclared identifier 'CLOCK_MONOTONIC'
clock_gettime(CLOCK_MONOTONIC, &ts);
^
This enables/disables adaptive synchronization on the output.
For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
This correct the description of the commmand:
workspace [--no-auto-back-and-forth] [number] <[num:]name>
Previously, the number and num pieces were being confused. This also
documents the behavior of the --no-auto-back-and-forth flag.
This can be used as a workaround to flag terminal windows as urgent when
commands are completed, until urgency is introduced in the Wayland
protocol.
Configure your shell to run `swaymsg "[pid=$PPID] urgent enable"` when
commands are completed, and use a terminal which uses one process per
window.
This adds support for input type configs to input_cmd_events. This works
similar to the wildcard handling that existed where configs for the
devices are stored and the type config is reset to INT_MIN so that it
does not override.
This also condenses the toggle_send_events and
toggle_wildcard_send_events functions into a single function to reduce
code duplication.
If a subsurface is created for a surface that is associated with a
scratchpad hidden view, do not attempt to send an enter to it. The
subsurface is not on any output and since there is no workspace
associated with the view, attempting to get the output for the NULL
workspace will result in a SIGSEGV.
This patch makes it so users that have configured their screen with a
transform don't have to update their config after the wlroots breaking
change.
References: https://github.com/swaywm/wlroots/pull/2023
The output manager config is created when the output is created. It is
updated when the mode, transform, scale, or layout for the output
changes, as well as, when the output is destroyed.
Since the output->enabled property was not being set before calling
apply_output_config, the output event handlers were early returning and
never updating the output manager config when the output state was
committed.
This fixes the issue by setting output->enabled in apply_output_config
below the output disabling section. There are also a few other minor
changes that are required to function.
Additionally, this renames output_enable to output_configure to better
describe the recent changes.
The condition in test_mark was checking the negation of list_seq_find.
This works fine for the first mark, but fails for every other mark. This
fixes the condition to check for anything other than -1, which is the
value returned from list_seq_find for index not found.
The only output_enable caller is now apply_output_config. Stop calling
apply_output_config from output_enable to simplify the code and avoid
the back-and-forth between these two functions.
output_enable is now the symmetric of output_disable: it just marks the
output as enabled and performs bookkeeping (e.g. creating teh default
workspace). It is called from apply_output_config after the output
commit, so that it can read the current output state and act
accordingly.
This change also allows us to avoid an extraneous wlr_output_commit.
References: https://github.com/swaywm/sway/issues/4921
apply_output_config will call output_enable if necessary.
This fixes a lone wlr_output_enable call (without a matching
wlr_output_commit call) which was a no-op.
This makes it so invalid configs will return the exit code 1 when the
validation flag is given. This also reduces the log level to SWAY_ERROR,
which makes it so only the errors are shown. If someone wants more
verbose output, the can use the -V/--verbose or -d/--debug flags.
Additionally, this also makes it so swaybg will not be spawned when
validating the config.
It looks like the code to drop privileges may have been broken via
commit 37f0e1f. That commit reverted the correct order from #911, which
first drops the gid then the uid. If setuid is called first then the
target user may not have the ability to setgid.
The container_at_tabbed and container_at_stacked container were checking
the bounds along the y-axis, but not the x-axis. This made it possible
to cause a segfault for specific resolution, horizontal gap, and
workspace children lengths. The issue is that child_index was -1 and was
resulting in a buffer underflow. Adding the x-axis bound checks for
early returns should prevent this from happening.
24e8ba048a did not take scaling into account.
The hotspot size used pixel coordinates, the absolute coordinates were logical,
and the relative coordinates were completely wrong.
This commit makes all coordinates use logical values. If
`"float_event_coords":true` is sent in the handshake message, coordinates are
sent as floating-point values.
The "scale" field is an integer containing the scale value.
The function group_handler may get a nullptr as `new_group`. If that's
the case, return true, as if `new_group` was the empty string.
Also make the conversion to bool explicit when calling `strcmp`.
This fixes the following crash:
#0 0x00007f7daac3af25 in raise () at /usr/lib/libc.so.6
#1 0x00007f7daac24897 in abort () at /usr/lib/libc.so.6
#2 0x00007f7daac24767 in _nl_load_domain.cold () at /usr/lib/libc.so.6
#3 0x00007f7daac33526 in () at /usr/lib/libc.so.6
#4 0x0000555bfbc35029 in seat_set_focus_layer (seat=0x555bfd76d860, layer=0x555bfdda2ff0)
at ../sway/input/seat.c:1164
__PRETTY_FUNCTION__ = "seat_set_focus_layer"
__PRETTY_FUNCTION__ = "seat_set_focus_layer"
#5 0x0000555bfbc35029 in seat_set_focus_layer (seat=seat@entry=0x555bfd76d860, layer=0x555bfdda2ff0)
at ../sway/input/seat.c:1164
__PRETTY_FUNCTION__ = "seat_set_focus_layer"
#6 0x0000555bfbc25899 in handle_output_destroy (listener=0x555bfdb90688, data=<optimized out>)
at ../sway/desktop/layer_shell.c:263
layer = 0x555bfdd6b040
sway_layer = 0x555bfdb90610
seat = 0x555bfd76d860
client = 0x555bfdb76d70
set_focus = <optimized out>
#7 0x0000555bfbc5b669 in wl_signal_emit (data=0x555bfd795930, signal=0x555bfd795ae0)
at /usr/include/wayland-server-core.h:472
l = <optimized out>
next = 0x555bfdb6a3e8
__PRETTY_FUNCTION__ = "output_disable"
index = <optimized out>
#8 0x0000555bfbc5b669 in output_disable (output=output@entry=0x555bfd795930)
at ../sway/tree/output.c:263
__PRETTY_FUNCTION__ = "output_disable"
index = <optimized out>
#9 0x0000555bfbc3b890 in apply_output_config (oc=0x555bfd7d73d0, output=output@entry=0x555bfd795930)
at ../sway/config/output.c:321
wlr_output = 0x555bfd7afaf0
scale = <optimized out>
output_box = <optimized out>
#10 0x0000555bfbc28309 in handle_output_manager_apply
(listener=0x555bfbc7f148 <server+488>, data=0x555bfdca6eb0) at ../sway/desktop/output.c:936
wlr_output = <optimized out>
output = 0x555bfd795930
oc = <optimized out>
server = 0x555bfbc7ef60 <server>
config = 0x555bfdca6eb0
config_head = 0x555bfdb79350
ok = true
#11 0x00007f7dab4fbf7c in wlr_signal_emit_safe (signal=<optimized out>, data=0x555bfdca6eb0)
at ../subprojects/wlroots/util/signal.c:29
pos = 0x555bfbc7f148 <server+488>
l = 0x555bfbc7f148 <server+488>
cursor =
{link = {prev = 0x555bfbc7f148 <server+488>, next = 0x7fff238a8390}, notify = 0x7f7dab4fbef0 <handle_noop>}
end =
{link = {prev = 0x7fff238a8370, next = 0x555bfd7419f8}, notify = 0x7f7dab4fbef0 <handle_noop>}
#12 0x00007f7daa45469a in ffi_call_unix64 () at /usr/lib/libffi.so.6
#13 0x00007f7daa453fb6 in ffi_call () at /usr/lib/libffi.so.6
#14 0x00007f7daae6f82f in () at /usr/lib/libwayland-server.so.0
#15 0x00007f7daae6c193 in () at /usr/lib/libwayland-server.so.0
#16 0x00007f7daae6d7f2 in wl_event_loop_dispatch () at /usr/lib/libwayland-server.so.0
#17 0x00007f7daae6c39c in wl_display_run () at /usr/lib/libwayland-server.so.0
This crash happens because focus can only be set on mapped surfaces.
