Commit graph

90 commits

Author SHA1 Message Date
Brian Ashworth ebe5399ed6 pointer_constraint: change to a seat subcommand
This changes the `pointer_constraint` command to be a subcommand of seat
to allow for per-seat settings. The current implementation that is not a
seat subcommand will only operate on the current seat and will segfault
in the config due to `config->handler_context.seat` only being set at
runtime.

This also allows for the wildcard identifier to be used to alter the
pointer constraint settings on all seats and allows for the setting to
be merged with the rest of the seat config.
2019-01-31 22:58:52 -05:00
Drew DeVault a6d41254c9 Add pointer_constraint command 2019-01-30 19:53:59 +01:00
Brian Ashworth 02bbefda20 bar_cmd_tray_bind: Use mouse button helpers
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for
parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`,
which will use `get_mouse_bindcode` for parsing mouse buttons. Like with
sway bindings, the two commands are encapsulated in a single file to
maximize shared code.

This also modifies tray bindings to work off of events codes rather than
x11 buttons, which allows for any mouse buttons to be used.

For `get_bar_config`, `event_code` has been added to the `tray_bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
2019-01-16 11:12:45 +01:00
Ryan Dwyer 2024f1da72 Resize only current and immediate siblings rather than all siblings
For example, create layout V[view view view] and resize the leftmost
view using mod+rightclick. Previously, the edge between view 2 and 3
would be adjusted as well. Now this edge will remain constant, which
matches the behaviour of i3.

To do this operation correctly, the resize tiling seatop now keeps track
of two containers, as the container that resizes horizontally will be a
different container to the one which resizes vertically (one will be an
ancestor). The tiling resize seatop now figures out these containers
during the start of the operation and keeps references to them in the
event. A new function container_find_resize_parent has been introduced
to do this. This function is also used by the resize command.

During cursor motion, the seatop logic is similar to before, but now has
to choose the correct container to resize.

In resize.c, container_resize_tiled and resize_tiled have been merged
into one. One of them originally did nothing except pass the values
through to the other.

container_resize_tiled now takes a simplified approach where it just
finds the immediate siblings on either side and resizes them without
worrying about the others. The parellel_coord and parallel_size
functions are no longer needed and have been removed.
2019-01-15 08:01:21 +10:00
M Stoeckl 2a684cad5f Remove now-unused "input" argument of cmd_results_new
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))`
applied to `cmd_results_new`.

String usage constants have been converted from pointers to arrays when
encountered. General handler format strings were sometimes modified to
include the old input string, especially for unknown command errors.
2019-01-14 08:05:29 -05:00
M Stoeckl 6d392150a7 Remove 'input' field of IPC command return json
This field is not in i3 and provides imprecise and redundant information.
(Specifically, when swaymsg is given a list of commands, the IPC return
array already indicates precisely which number command failed; knowing
the name of the command is not useful when multiple commands of the
same type are provided.)
2019-01-14 07:58:02 -05:00
Drew DeVault 4879d40695
Merge pull request #3144 from emersion/cmd-xwayland
Add xwayland command
2019-01-13 20:42:39 -05:00
Drew DeVault 81bb675274
Merge pull request #3344 from RedSoxFan/bar-mouse-bindings-improved
Improve mouse button parsing: bar mouse bindings
2019-01-13 20:41:05 -05:00
Brian Ashworth ca0a75d540 swaybar: add status_edge_padding command
This adds the bar subcommand `status_edge_padding <padding>` to set the
padding used when the status line is on the right edge of the bar.
2019-01-11 00:12:24 -05:00
Brian Ashworth c0f92cb2fb swaybar: add status_padding command
Adds the bar subcommand `status_padding <padding>` which allows setting
the padding used for swaybar. If `status_padding` is set to `0`, blocks
will be able to take up the full height of the bar.
2019-01-11 00:07:58 -05:00
Brian Ashworth 3d6440ec26 bar_cmd_bind: utilize mouse button helpers
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing
mouse buttons. This also introduces `cmd_bar_bindcode`, which will use
`get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the
two commands are encapsulated in a single file with shared code.

This also modifies swaybar to operate off of event codes rather than x11
button numbers, which allows for any mouse button to be used.

This introduces two new IPC properties:
- For `get_bar_config`, `event_code` has been added to the `bindings`
section and will include to event code for the button. If the event code
can be mapped to a x11 button, `input_code` will still be the x11 button
number. Otherwise, `input_code` will be `0`.
- Likewise for `click_events`, `event` has been added and will include
the event code for the button clicked. If the event code can be mapped
to a x11 button, `button` will still be the x11 button number.
Otherwise, `button` will be `0`.
2019-01-10 12:43:10 -05:00
Brian Ashworth 5bf4daf263 Implement tiling_drag_threshold
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
2019-01-02 23:33:33 +01:00
Ian Fan 6b03c68775 swaybar: implement tray config 2018-12-31 20:40:18 +00:00
Brian Ashworth 4d88c95790 hide_cursor: change to a seat subcommand
This makes hide_cursor a seat subcommand, which allows for seat specific
timeouts.
2018-12-30 14:17:24 +01:00
Brian Ashworth 5fca74a1f1 Implement hide_cursor <timeout> command
Allows the cursor to be hidden after a specified timeout in
milliseconds
2018-12-25 13:31:56 +01:00
Brian Ashworth 1bd8463481 Implement bar gaps
Adds the bar subcommand `gaps <amount>|<horizontal> <vertical>|<top>
<right> <bottom> <left>` to set gaps for swaybar. Due to restrictions on
margins for a layer_surface, only the sides that are anchored to an edge
of the screen can have gaps. Since there is support for per-side outer
gaps for workspaces, those should be able to be used instead for the
last side.
2018-11-28 11:24:14 -05:00
Brian Ashworth 5c6f3d7266 Change execute_command to return a list of results
This matches i3's behavior of returning a list of results that contain
the result of each command that was executed. Additionally, the
`parse_error` attribute has been added to the IPC JSON reply.
2018-11-27 21:42:09 -05:00
Brian Ashworth e6562c8cd2 Implement title alignment
This adds support for `i3 4.16`'s ability to set the title alignment.
The command is `title_align left|center|right`.

When the title is on the right, marks are moved to the left. Otherwise,
they are on the right.
2018-11-25 22:08:58 -05:00
Florent de Lamotte 7555c7efdc Adding commands for configuring titlebar borders and padding 2018-11-22 10:30:04 +01:00
emersion bf7af9c690
Merge pull request #3083 from c-edw/feature/StripWorkspaceName
Implement strip_workspace_name.
2018-11-19 17:56:18 +01:00
emersion 311c7db7e3
Add xwayland command 2018-11-19 17:38:37 +01:00
Spencer Michaels 70bc4c3ab6 Add scroll factor config option. 2018-11-18 13:49:30 -05:00
Connor E 4bd46fb079 Implement strip_workspace_name. 2018-11-17 16:11:28 +00:00
Ian Fan 9227cb7d67 commands: replace EXPECTED_LESS_THAN with EXPECTED_AT_MOST
This makes it a bit more obvious what the expected number of arguments is.
2018-10-23 10:51:54 +01:00
Ian Fan 5364255f26 commands: remove EXPECTED_MORE_THAN
Its uses have been replaced with EXPECTED_AT_LEAST.
2018-10-23 10:17:58 +01:00
Ryan Dwyer b9b1b0e566 Remove raise_floating directive
The directive controlled whether floating views should raise to the top
when the cursor is moved over it while using focus_follows_mouse. The
default was enabled, which is undesirable. For example, if you have two
floating views where one completely covers the other, the smaller one
would be inaccessible because moving the mouse over the bigger one would
raise it above the smaller one.

There is no known use case for having raise_floating enabled, so this
patch removes the directive and implements the raise_floating disabled
behaviour instead.
2018-10-20 17:51:32 +10:00
Ryan Dwyer 61699a1146 resize: Determine if anything changed using before/after check
Returning a boolean from container_resize_tiled and resize_tiled doesn't
work in all cases. This patch changes it back to void and does a
before/after check to see if the container was resized.
2018-10-09 22:25:21 +10:00
Ryan Dwyer 832ebc8966 Implement popup_during_fullscreen
This introduces a new view_impl function: is_transient_for. Similar to
container_has_ancestor but works using the surface parents rather than
the tree.

This patch modifies view_is_visible, container_at and so on to allow
transient views to function normally when they're in front of a
fullscreen view.
2018-10-08 22:49:59 +10:00
Drew DeVault 92e1fc00fd Shim client.background and client.placeholder
These are not supported by sway, but are valid i3 commands and should not
cause config errors.

Also includes a couple of minor touch-ups.
2018-10-07 14:44:37 -04:00
Jonathan Buch 298ccb539c
Add configuration for raising containers on focus
* New configuration option: raise_floating
  (From the discussion on https://github.com/i3/i3/issues/2990)
* By default, it still raises the window on focus, otherwise it
  will raise the window on click.
2018-10-03 16:23:12 +02:00
Brian Ashworth bb25194844 Handle border options for gaps
Fixes `hide_edge_borders smart` when gaps are in use.
Implements `hide_edge_borders smart_no_gaps` and `smart_borders
on|no_gaps|off`.

Since `smart_borders on` is equivalent to `hide_edge_borders smart`
and `smart_borders no_gaps` is equivalent to `hide_edge_borders
smart_no_gaps`, I opted to just save the last value set for
`hide_edge_borders` and restore that on `smart_borders off`. This
simplifies the conditions for setting the border.
2018-10-01 21:19:06 -04:00
Drew DeVault 8f6aca2166
Merge pull request #2725 from PumbaPe/add-tap-and-drag
Add tap and drag to sway-input
2018-09-30 13:44:11 +02:00
PP ae2b70f59e add tap-and-drag setting to sway-input 2018-09-29 11:49:41 +02:00
Ryan Dwyer 42f1fdf015 Return an error when resizing is a no op 2018-09-29 17:05:55 +10:00
Ryan Dwyer cb66bbea42 Allow running commands on containers without focusing them
This adds a `con` argument to `execute_command` which allows you to
specify the container to execute the command on. In most cases it leaves
it as `NULL` which makes it use the focused node. We only set it when
executing `for_window` criteria such as when a view maps. This means we
don't send unnecessary IPC focus events, and fixes a crash when the
criteria command is `move scratchpad` (because we can't give focus to a
hidden scratchpad container).

Each of the shell map handlers now check to see if the view has a
workspace. It won't have a workspace if criteria has moved it to the
scratchpad.
2018-09-23 08:39:11 +10:00
Ryan Dwyer db28459634 Introduce create_output command (for developer use)
Should help with testing hotplugging.
2018-09-19 21:54:27 +10:00
Ryan Dwyer ec9c4de564 Introduce tiling_drag directive 2018-09-11 17:17:19 +10:00
Ryan Dwyer f057a0195e Implement focus_on_window_activation
Depends on https://github.com/swaywm/wlroots/pull/1223
2018-09-02 18:20:34 +10:00
Ian Fan c1af79532f commands: add nop 2018-08-18 15:50:26 +01:00
Ryan Dwyer b4a0363d17 Implement resizing tiled containers via cursor
* The OP_RESIZE seat operation has been renamed to OP_RESIZE_FLOATING,
and OP_RESIZE_TILING has been introduced.
* Similar to the above, seat_begin_resize and handle_resize_motion have
been renamed and tiling variants introduced.
* resize.c's resize_tiled has to be used, so container_resize_tiled has
been introduced in resize.c to allow external code to call it.
2018-08-12 10:45:54 +10:00
Brian Ashworth a7f7d4a488 Write to swaynag pipe fd directly on config errors 2018-08-03 10:37:35 -04:00
ProgAndy c7a3a03115 Add xkb_numlock/xkb_capslock commands (#2311) 2018-07-25 17:24:45 +02:00
Ryan Dwyer 9fbe13b9be Implement floating_modifier and mouse operations for floating views
This implements the following:

* `floating_modifier` configuration directive
* Drag a floating window by its title bar
* Hold mod + drag a floating window from anywhere
* Resize a floating view by dragging the border
* Resize a floating view by holding mod and right clicking anywhere on
the view
* Resize a floating view and keep aspect ratio by holding shift while
resizing using either method
* Mouse cursor turns into resize when hovering floating border or corner
2018-07-22 23:10:19 +10:00
Ryan Dwyer c2ed3d8bd6 Implement force_display_urgency_hint
The directive sets the timeout before an urgent view becomes normal
again after switching to it from another workspace.

Also:

* When an xwayland surface removes the urgent hint while the timer is
active, we now ignore the request. This happens as soon as the view
receives focus, so it was effectively making the timer pointless.
* The timeout is now only applied when switching to it from another
workspace.
2018-07-21 10:28:07 +10:00
Ryan Dwyer 315d5311b2 Implement urgency base functionality
Introduces a command to manually set urgency, as well as rendering of
urgent views, sending the IPC event, removing urgency after focused for
one second, and matching urgent views via criteria.
2018-07-16 08:19:25 +10:00
Brian Ashworth 13c6627ddb Implement tap_button_map for input devices 2018-07-14 01:01:47 -04:00
Robert Kubosz 41b80c28df
add scroll button option
This commit introduces a scroll_button option, which is intended to be
used with scroll_method. Now user can edit his sway config and add an
scroll_button option to device section.
2018-07-11 22:03:06 +02:00
emersion ba3511b243 Remove clipboard command and get_clipboard message 2018-07-10 22:09:21 +01:00
Dominique Martinet fe72e3b349 cmd_results_to_json: return copied string and properly free the json
The only user of this function would copy the string right away
to get rid of the const flag anyway, and freeing a const string
afterwards might work but is not meant to be done according to the
json-c API.
2018-07-05 13:11:02 +09:00
Brian Ashworth 5ea4a4d3ee Refactor cmd_output to use config_subcommand 2018-06-03 10:26:06 -04:00