Commit graph

329 commits

Author SHA1 Message Date
Ryan Dwyer 4e8bf5b328 Fix double free of mode
config->current_mode is a pointer into the config->modes list, and each
mode has already been freed.

Same with bars.
2018-11-15 23:48:11 +10:00
Connor E eda1bf769f More frees. 2018-11-13 14:42:00 +00:00
Drew DeVault 7fa7f4f48d
Merge pull request #3085 from 7415963987456321/master
Remove extra line.
2018-11-08 20:07:41 -05:00
7415963987456321 965abe077a Remove extra line 2018-11-09 00:57:09 +00:00
Brian Ashworth 9e8aa39530 Implement per side and per direction outer gaps
This introduces the following command extensions from `i3-gaps`:
* `gaps horizontal|vertical|top|right|bottom|left <amount>`
* `gaps horizontal|vertical|top|right|bottom|left all|current
set|plus|minus <amount>`
* `workspace <ws> gaps horizontal|vertical|top|right|bottom|left
<amount>`

`inner` and `outer` are also still available as options for all three
of the above commands. `outer` now acts as a shorthand to set/alter
all sides.

Additionally, this fixes two bugs with the prevention of invalid gap
configurations for workspace configs:
1. If outer gaps were not set and inner gaps were, the outer gaps
would be snapped to the negation of the inner gaps due to `INT_MIN`
being less than the negation. This took precedence over the default
outer gaps.
2. Similarly, if inner gaps were not set and outer gaps were, inner
gaps would be set to zero, which would take precedence over the
default inner gaps.

Fixing both of the above items also requires checking the gaps again
when creating a workspace since the default outer gaps can be smaller
than the negation of the workspace specific inner gaps.
2018-11-07 22:44:11 -05:00
Connor E 4a21981855 Add focus_follows_mouse always. (#3081)
* Add focus_follows_mouse_mode.

* Fail if focus_follows_mouse is invalid.

* Fix indentation.
2018-11-06 21:58:08 +01:00
Rouven Czerwinski f54287eaf3 config: mention that reload message is also printed on validation 2018-11-05 21:06:28 +01:00
Brian Ashworth 31f82830b2 config: remove peeked + expanded line log entries
The peeked and expanded line log entries were useful during the switch
to generic code blocks and subcommands. However, it has been a while
since those were introduced and the log entries are no longer helpful
for any remaining issues with config parsing. Instead of keeping them
as clutter in the log, they can just be removed.
2018-10-22 17:52:41 -04:00
Ryan Dwyer b9b1b0e566 Remove raise_floating directive
The directive controlled whether floating views should raise to the top
when the cursor is moved over it while using focus_follows_mouse. The
default was enabled, which is undesirable. For example, if you have two
floating views where one completely covers the other, the smaller one
would be inaccessible because moving the mouse over the bigger one would
raise it above the smaller one.

There is no known use case for having raise_floating enabled, so this
patch removes the directive and implements the raise_floating disabled
behaviour instead.
2018-10-20 17:51:32 +10:00
Ryan Dwyer c006717910 Minor refactor of input manager
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.

On a similar note:

* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.

Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.

Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
2018-10-20 13:11:43 +10:00
Tarmack 36d9037f2c fix_edge_gaps: Allow negative values for outer gaps.
While allowing negative values for the outer gaps it is still prevented that negative values move windows out of the container. This replaces the non-i3 option for edge_gaps.
2018-10-13 17:42:49 +02:00
Rouven Czerwinski 41991542ca Add mouse_warping container
This option always moves the cursor into the middle of the container if the warp
variable is true in seat_set_focus_warp.

Fixes #2577
2018-10-10 12:45:21 +02:00
Rouven Czerwinski 1eb0dc2922 config: remove double free of config->swaynag_command
Fixes #2796
2018-10-09 13:14:02 +02:00
Brian Ashworth 3f328b6276
Merge branch 'master' into popup-during-fullscreen 2018-10-08 15:18:49 -04:00
Brian Ashworth 09c3c33081 Allow swaynag to be disabled 2018-10-08 09:59:38 -04:00
emersion c988b03d85 Allow swaybg to be disabled
Same as #2791 but for swaybg.

Fixes #2790
2018-10-08 15:08:33 +02:00
Ryan Dwyer 832ebc8966 Implement popup_during_fullscreen
This introduces a new view_impl function: is_transient_for. Similar to
container_has_ancestor but works using the surface parents rather than
the tree.

This patch modifies view_is_visible, container_at and so on to allow
transient views to function normally when they're in front of a
fullscreen view.
2018-10-08 22:49:59 +10:00
Ryan Dwyer 82423991a8 Reload config using idle event
This patch makes it so when you run reload, the actual reloading is
deferred to the next time the event loop becomes idle. This avoids
several use-after-frees and removes the workarounds we have to avoid
them.

When you run reload, we validate the config before creating the idle
event. This is so the reload command will still return an error if there
are validation errors. To allow this, load_main_config has been adjusted
so it doesn't apply the config if validating is true rather than
applying it unconditionally.

This also fixes a memory leak in the reload command where if the config
failed to load, the bar_ids list would not be freed.
2018-10-08 19:28:53 +10:00
Jonathan Buch 298ccb539c
Add configuration for raising containers on focus
* New configuration option: raise_floating
  (From the discussion on https://github.com/i3/i3/issues/2990)
* By default, it still raises the window on focus, otherwise it
  will raise the window on click.
2018-10-03 16:23:12 +02:00
Brian Ashworth bb25194844 Handle border options for gaps
Fixes `hide_edge_borders smart` when gaps are in use.
Implements `hide_edge_borders smart_no_gaps` and `smart_borders
on|no_gaps|off`.

Since `smart_borders on` is equivalent to `hide_edge_borders smart`
and `smart_borders no_gaps` is equivalent to `hide_edge_borders
smart_no_gaps`, I opted to just save the last value set for
`hide_edge_borders` and restore that on `smart_borders off`. This
simplifies the conditions for setting the border.
2018-10-01 21:19:06 -04:00
Ryan Dwyer 138d10d5d6 Rename workspace_outputs to workspace_configs and fix memory leak
When we eventually implement `workspace <ws> gaps inner|outer <px>`,
we'll need to store the gaps settings for workspaces before they're
created. Rather than create a workspace_gaps struct, the approach I'm
taking is to rename workspace_outputs to workspace_configs and then add
gaps settings to that.

I've added a lookup function workspace_find_config. Note that we have a
similar thing for outputs (output_config struct and output_find_config).

Lastly, when freeing config it would create a memory leak by freeing the
list items but not the workspace or output names inside them. This has
been rectified using a free_workspace_config function.
2018-09-28 22:35:38 +10:00
Ryan Dwyer ec9c4de564 Introduce tiling_drag directive 2018-09-11 17:17:19 +10:00
Ryan Dwyer 9215ca0f01 Align titles to baseline
This does the following:

* Adds a baseline argument to get_text_size (the baseline is the
distance from the top of the texture to the baseline).
* Stores the baseline in the container when calculating the title
height.
* Takes the baseline into account when calculating the config's max font
height.
* When rendering, pads the textures according to the baseline so they
line up.
2018-09-08 16:25:07 +10:00
Ryan Dwyer 7586f150c0 Implement type safe arguments and demote sway_container
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.

In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.

If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.

There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.

In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.

The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.

The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.

Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.

Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.

In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.

container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.

`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.

container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.

There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.

The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
2018-09-05 18:01:43 +10:00
Ryan Dwyer 5dbbab7bdc Remove layout.c
When we have type safety we'll need to have functions for
workspace_add_tiling and so on. This means the existing container
functions will be just for containers, so they are being moved to
container.c. At this point layout.c doesn't contain much else, so I've
relocated everything and removed the file.

* container_swap and its static functions have been moved to the swap
command and made static.
* container_recursive_resize has been moved to the resize command and
made static.
* The following have been moved to container.c:
    * container_handle_fullscreen_reparent
    * container_insert_child
    * container_add_sibling
    * container_add_child
    * container_remove_child
    * container_replace_child
    * container_split
* enum movement_direction and sway_dir_to_wlr have been moved to util.c.

Side note: Several commands included layout.h which then included
root.h. With layout.h gone, root.h has to be included by those commands.
2018-08-26 12:05:16 +10:00
Ryan Dwyer d6cd79c342 Implement iterators per container type
This introduces the following `for_each` functions:

* root_for_each_workspace
* root_for_each_container
* output_for_each_workspace
* output_for_each_container
* workspace_for_each_container

And introduces the following `find` functions:

* root_find_output
* root_find_workspace
* root_find_container
* output_find_workspace
* output_find_container
* workspace_find_container
* container_find_child

And removes the following functions:

* container_descendants
* container_for_each_descendant
* container_find

This change is preparing the way for demoting sway_container. Eventually
these functions will accept and return sway_outputs, sway_workspaces and
sway_containers (meaning a C_CONTAINER or C_VIEW).

This change also makes it easy to handle abnormalities like the
workspace floating list, root's scratchpad list and (once implemented)
root's saved workspaces list for when there's no connected outputs.
2018-08-18 23:38:54 +10:00
Ryan Dwyer 4ad1ccc9dc Remove container_for_each_descendant_bfs
The function was not used.

Also renames container_for_each_descendant_dfs to just
container_for_each_descendant.
2018-08-11 15:57:09 +10:00
Brian Ashworth 36fd84cc42 Remove swaynag_clone and use memcpy 2018-08-03 10:40:09 -04:00
Brian Ashworth a7f7d4a488 Write to swaynag pipe fd directly on config errors 2018-08-03 10:37:35 -04:00
Brian Ashworth f9a6407111 Show swaynag on config errors 2018-08-03 10:37:35 -04:00
Brian Ashworth dca02944ce Implement floating_modifier <mod> [inverse|normal] 2018-07-24 18:41:08 -04:00
Drew DeVault 817d37c950
Merge pull request #2165 from swaywm/pid-workspaces
Implement pid->workspace tracking
2018-07-24 14:44:01 -04:00
frsfnrrg 754372c3de Parse mouse binding options
First, the existing sway_binding structure is given an
enumerated type code. As all flags to bindsym/bindcode
are boolean, a single uint32 is used to hold all flags.
The _BORDER, _CONTENTS, _TITLEBAR flags, when active,
indicate in which part of a container the binding can
trigger; to localize complexity, they do not overlap
with the command line arguments, which center around
_TITLEBAR being set by default.

The keyboard handling code is adjusted for this change,
as is binding_key_compare; note that BINDING_LOCKED
is *not* part of the key portion of the binding.

Next, list of mouse bindings is introduced and cleaned up.

Finally, the binding command parsing code is extended
to handle the case where bindsym is used to describe
a mouse binding rather than a keysym binding; the
difference between the two may be detected as late as
when the first key/button is parsed, or as early as
the first flag.  As bindings can have multiple
keycodes/keysyms/buttons, mixed keysym/button sequences
are prohibited.
2018-07-23 21:14:22 -04:00
Drew DeVault f4b882475e Merge branch 'master' into pid-workspaces 2018-07-23 20:31:11 -04:00
Brian Ashworth bc7d332109 Reset outputs on reload 2018-07-20 22:17:20 -04:00
Ryan Dwyer c2ed3d8bd6 Implement force_display_urgency_hint
The directive sets the timeout before an urgent view becomes normal
again after switching to it from another workspace.

Also:

* When an xwayland surface removes the urgent hint while the timer is
active, we now ignore the request. This happens as soon as the view
receives focus, so it was effectively making the timer pointless.
* The timeout is now only applied when switching to it from another
workspace.
2018-07-21 10:28:07 +10:00
Brian Ashworth ec65286606 Fix deferred command handling 2018-07-19 01:39:58 -04:00
frsfnrrg 600676688a Free individual criteria in free_config
Also free cmd_list when cleaning up a struct criteria.
2018-07-17 11:35:00 -04:00
Drew DeVault db3a363734 Revert "config: free include path on successful load"
This reverts commit 92450883d7.
2018-07-16 21:02:13 -04:00
Ian Fan 92450883d7 config: free include path on successful load 2018-07-15 21:48:39 +01:00
Ian Fan 011d43746f Add error handling for getting config file size 2018-07-15 15:36:51 +01:00
Ian Fan e6209afcd6 Fix config buffer overflow and logic 2018-07-15 14:59:54 +01:00
Ryan Dwyer 2032f85d94 Simplify transactions by utilising a dirty flag on containers
This PR changes the way we handle transactions to a more simple method.
The new method is to mark containers as dirty from low level code
(eg. arranging, or container_destroy, and eventually seat_set_focus),
then call transaction_commit_dirty which picks up those containers and
runs them through a transaction. The old methods of using transactions
(arrange_and_commit, or creating one manually) are now no longer
possible.

The highest-level code (execute_command and view implementation
handlers) will call transaction_commit_dirty, so most other code just
needs to set containers as dirty. This is done by arranging, but can
also be done by calling container_set_dirty.
2018-07-14 23:14:55 +10:00
Alex Xu fbecfc2d35 config.c: fix current_config uninit warning (#2249) 2018-07-12 13:00:57 -04:00
Ian Fan 23c1c26c3f Add get_config message type to ipc 2018-07-10 12:37:37 +01:00
emersion 63b4bf5000
Update for swaywm/wlroots#1126 2018-07-09 22:54:30 +01:00
Dominique Martinet 9f5d539657 config: add a couple of forgotten frees 2018-07-05 08:13:10 +09:00
Dominique Martinet 4eeca10a8a load_config: move NULL path check before first use
Found through static analysis
2018-07-02 08:03:41 +09:00
Dominique Martinet 8c526bbb03 config include: fix leak on relative include path
Found through static analysis
2018-07-02 08:03:41 +09:00
Dominique Martinet 0c6149171b read_config: fix leak on error
Found through static analysis.
2018-07-02 08:03:41 +09:00