This commit changes how commands decide what container to act on.
Commands get the current container though `current_container`, a global
defined in sway/commands.c. If a criteria is given before a command,
then the following command will be run once for every container the
criteria matches with a reference to the matching container in
'current_container'. Commands should use this instead of
`get_focused_container()` from now on.
This commit also fixes a few (minor) mistakes made in implementing marks
such as non-escaped arrows in sway(5) and calling the "mark" command
"floating" by accident. It also cleans up `criteria.c` in a few places.
This commit adds three commands to sway: `show_marks`, `mark` and
`unmark`. Marks are displayed right-aligned in the window border as i3
does. Marks may be found using criteria.
Fixes#1007
Some users may want to switch buttons on their input devices, turns out
libinput already supports it. Let's add a support for it in our config.
Signed-off-by: Michał Winiarski <knr@hardline.pl>
Fixes#819. If workspace is focused and command 'move container to
workspace/output' is issued, workspace child containers are wrapped in a
new container and moved according to command.
When workspace_auto_back_and_forth is enabled, workspaces get switched
twice with previously mentioned command, which is not the expected
behavior.
Removes one redundant creation of previous workspace.
Replace `update_view_border()` with `update_container_border()`. The latter
should handle both the case where the container is a view or if the container
has children.
Deeply nested containers which had their layouts changed didn't update
their actual_geometry, this messed up their child containers. Those got
width and height of 0, which was then decreased for stacked/tabbed
containers by title height. Underflow ensued, these containers suddenly
had height 4294967273. In short, not updating actual_geometry didn't
play nicely with nested containers.
Previously, cmd_kill only closed a focused view, while containers were
not affected. Now it closes all views that are children of the focused
container.
Tabbed/stacked containers are now created only if a view is present on
the workspace. If a view is created on previously empty tabbed/stacked
workspace, it gets wrapped in a container.
Values cannot be negative or 0; if so uses the default 75x50.
Uses the same syntax as i3: floating_minimum_size <width> x <height>, although the x can be anything.
when creating a new output, move to that output all extant workspaces
that are assigned to that output.
(unrelated) remove comment that was no longer applicable, fix spacing in
an assignment
The borders are implemented as a surface/buffer attached to each view
which is sent to and rendered by wlc in the view_pre_render callback.
All the drawing logic is handled in sway/border.c and all the logic for
calculating the geometry of the border/view is handled in
`update_geometry` in sway/layout.c (same place as gaps are calculated).
The include command (`include <path>`) makes it possible to include sub
config files from the main config file (or from within other sub config
files).
The include command uses the following rules for including config files:
* the `path` can be either a full path or a path that is relative to the
parent config. Shell expansion is supported, so it's possible to do
`include ~/.config/sway.d/*`.
* The same config file can only be included once (to prevent include
cycles). If a config is included multiple times it will just be
ignored after it has been included once.
* Including a sub config file is the same as inserting the content of
that file into the parent config, thus rules about overwriting
bindsyms etc. works the same as for a single config.
Implement #542
Before passing a command to a command handler the quotes are stripped
from each argument in the command. This is usually the wanted behavior
but causes a problem in the case of `exec` where quoted arguments can be
required when passing the exec command to `/bin/sh -c`.
This patch makes `exec` a special case and doesn't strip quotes from the
arguments. It will just pass the exec command verbatim to the exec
command handler.
Fix#518
Calling `exit` in sway_terminate prevents sway from correctly shutting
down (freeing data, cleanly terminating the ipc server, etc.).
A better way is to exit straight away if the failure occurs before
`wlc_run` and use sway_abort as usual if it occur when wlc is running.
This adds quotes around multiword arguments before they are passed to
`/bin/sh -c` in an exec command.
Example:
I connect to irc like this:
exec termite -e "mosh server tmux a"
Without this patch the arguments are passed to sh as:
termite -e mosh server tmux a
When it should be:
termite -e "mosh server tmux a"
For the command to work.
Fix#444
This is a temporary fix, the real fix is to store the commands as a
formatted argv array, so they don't have to be reformatted all over the
place.
This is a "simple" version of --release (same as i3) that only supports
a binding that contain one normal key. e.g.:
bindsym --release $mod+x exec somthing-fun
I didn't bother implementing it for a combination like `$mod+x+z` since
it is a bit tricky to get right and also a bit weird to actually do on a
keyboard.
This makes sure that a modifier event is only sent for active bar
modifiers, and that it is only sent once for each of those modifiers.
An active bar modifier is a modifier defined for a bar with `mode hide`
and `hidden_state hide`.
Detects when a bar modifier key is pressed/released and sends a modifier
IPC event to any listeners (usually swaybars).
This way a swaybar can listen on the modifier event and hide/show the
bar accordingly (not implemented yet)
The modifier event looks like this:
{
"change": "pressed", // or released
"modifier": "Mod4"
}
This fixes https://github.com/SirCmpwn/sway/issues/431 by returning
focus to the fullscreen view. Also it fixes the issue with the
fullscreen view pointer not being set which did my head in
I've tried to make as few changes, as possible.
Usually the reason for using qsort_r is, that you can pass an extra userdata pointer to the
compare function. However, in sway list_sort wrapped qsort_r and always called a wrapper
function for comparing, the wrapper function then had the real compare function as argument.
The only thing, that the wrapper function does, is dereferencing the 'left' and 'right' function
arguments before passing them to the real compare function.
I have renamed list_sort to list_qsort to avoid confusion (so nobody tries to use list_qsort like
list_sort) and removed the wrapper functionality. Now the dereferencing must be done in the
compare function, that gets passed.
Some compare functions were used in both list_sort and list_seq_find. To make the difference
clear, I've added a '_qsort' suffix to the compare functions, that are intended to be used with
the new list_qsort. (In other words: list_qsort is not compatible anymore with list_seq_find).
- Changed and renamed function (it isn't used anywhere but in commands.c, and only for sorting):
compare_set -> compare_set_qsort
- New wrapper functions:
sway_binding_cmp_qsort (for sway_binding_cmp)
sway_mouse_binding_cmp_qsort (for sway_mouse_binding_cmp)
Our initial implementation of `bar { }` assumed that the commands could
only be used in the config. This is not true for two commands:
* bar mode
* bar hidden_state
This patch makes it possible to issue these commands outside a bar
block, for instance through swaymsg
$ swaymsg bar mode hide bar-0
This does not implement the `barconfig_update` IPC event which should be
trigged from these commands. I have added TODO's where this should be
added once implemented.
This works by tracking the pids of the child processes in the related
output container and terminating the processes and spawning new ones on
a config reload.
Should solve: #347
If the id is defined by another bar it will just use the default id for
the bar. Typically `bar-x`.
If the id command is used multiple times within a bar block, the last
one will 'win'.
When turning a float to a non-float, `get_focused_container` might
return another floating view, causing the active view to be inserted
into the floating list on its workspace instead of the normal child list
which it should. (Since it has `is_floating` as false the resulting
discrepency triggered other bad behaviour eventually leading sway to
crash.)
This patch fixes that by simply checking floating status before making
it a sibling.
