swayfx/sway/sway.5.scd
2018-08-20 10:17:32 +01:00

684 lines
24 KiB
Markdown

sway(5)
# NAME
sway - configuration file and commands
# DESCRIPTION
A sway configuration file is a list of sway commands that are executed by sway
on startup. These commands usually consist of setting your preferences and
setting key bindings. An example config is likely present in /etc/sway/config
for you to check out.
Lines in the configuration file might be extended through multiple lines by
adding a '\\' character at the end of line. e.g.:
```
bindsym Shift+XF86AudioRaiseVolume exec \\
pactl set-sink-volume @DEFAULT_SINK@ -1%
```
These commands can be executed in your config file, via *swaymsg*(1), or via
the bindsym command.
# COMMAND CONVENTIONS
Commands are split into several arguments using spaces. You can enclose
arguments with quotation marks (*"..."* or *'...'*) to add spaces to a single
argument. You may also run several commands in order by separating each with
*,* or *;*.
Throughout the documentation, *|* is used to distinguish between arguments for
which you may only select one. *[...]* is used for optional arguments, and
*<...>* for arguments where you are expected to supply some value.
# COMMANDS
The following commands may only be used in the configuration file.
*bar {* <commands...> *}*
_commands..._ after *{* will be interpreted as bar commands. For
details, see *sway-bar*(5). A newline is required between *{* and the
first command, and *}* must be alone on a line.
*default\_orientation* horizontal|vertical|auto
Sets the default container layout for tiled containers.
*include* <path>
Includes another file from _path_. _path_ can be either a full path or a
path relative to the parent config, and expands shell syntax (see
*wordexp*(3) for details). The same include file can only be included once;
subsequent attempts will be ignored.
*set* $<name> <value>
Sets variable $_name_ to _value_. You can use the new variable in the
arguments of future commands.
*swaybg\_command* <command>
Executes custom background _command_. Default is _swaybg_. Refer to
*output* below for more information.
*swaynag\_command* <command>
Executes custom command for _swaynag_. Default is _swaynag_. Additional
arguments may be appended to the end. This should only be used to either
direct sway to call swaynag from a custom path or to provide additional
arguments. This should be placed at the top of the config for the best
results.
The following commands cannot be used directly in the configuration file.
They are expected to be used with *bindsym* or at runtime through *swaymsg*(1).
*border* normal|pixel [<n>]
Set border style for focused window. _normal_ includes a border of
thickness _n_ and a title bar. _pixel_ is a border without title bar _n_
pixels thick. Default is _normal_ with border thickness 2.
*border* none|toggle
Set border style for focused window to _none_ or _toggle_ between the
available border styles: _normal_, _pixel_, _none_.
*exit*
Exit sway and end your Wayland session.
*floating* enable|disable|toggle
Make focused view floating, non-floating, or the opposite of what it is now.
<criteria> *focus*
Moves focus to the container that matches the specified criteria.
*focus* up|right|down|left
Moves focus to the next container in the specified direction.
*focus* child
Moves focus to the last-focused child of the focused container.
*focus* parent
Moves focus to the parent of the focused container.
*focus* output up|right|down|left
Moves focus to the next output in the specified direction.
*focus* output <name>
Moves focus to the named output.
*focus tiling*
Sets focus to the last focused tiling container.
*focus floating*
Sets focus to the last focused floating container.
*focus* mode\_toggle
Moves focus between the floating and tiled layers.
*fullscreen*
Toggles fullscreen for the focused view.
*layout* default|splith|splitv|stacking|tabbed
Sets the layout mode of the focused container.
*layout* toggle [split|all]
Cycles the layout mode of the focused container though a preset list of
layouts. If no argument is given, then it cycles through stacking, tabbed
and the last split layout. If "split" is given, then it cycles through
splith and splitv. If "all" is given, then it cycles through every layout.
*layout* toggle [split|tabbed|stacking|splitv|splith] [split|tabbed|stacking|splitv|splith]...
Cycles the layout mode of the focused container through a list of layouts.
*move* left|right|up|down [<px> px]
Moves the focused container in the direction specified. If the container,
the optional _px_ argument specifies how many pixels to move the container.
If unspecified, the default is 10 pixels. Pixels are ignored when moving
tiled containers.
*move* [absolute] position <pos\_x> [px] <pos\_y> [px]
Moves the focused container to the specified position in the workspace. If
_absolute_ is used, the position is relative to all outputs.
*move* [absolute] position center
Moves the focused container to be centered on the workspace. If _absolute_
is used, it is moved to the center of all outputs.
*move* position cursor|mouse|pointer
Moves the focused container to be centered on the cursor.
*move* container|window [to] mark <mark>
Moves the focused container to the specified mark.
*move* [--no-auto-back-and-forth] container|window [to] workspace [number] <name>
Moves the focused container to the specified workspace. The string "number"
is optional and is used to match a workspace with the same number, even if
it has a different name.
*move* container|window [to] workspace prev|next|current
Moves the focused container to the previous, next or current workspace on
this output, or if no workspaces remain, the previous or next output.
*move* container|window [to] workspace prev\_on\_output|next\_on\_output
Moves the focused container to the previous or next workspace on this
output, wrapping around if already at the first or last workspace.
*move* container|window [to] workspace back\_and\_forth
Moves the focused container to previously focused workspace.
*move* container|window|workspace [to] output <name>
Moves the focused container or workspace to the specified output.
*move* container|window|workspace [to] output up|right|down|left
Moves the focused container or workspace to next output in the specified
direction.
*move* [to] scratchpad
Moves the focused window to the scratchpad.
*nop* <comment>
A no operation command that can be used to override default behaviour. The
optional comment argument is ignored, but logged for debugging purposes.
*reload*
Reloads the sway config file and applies any changes.
*resize* shrink|grow width|height [<amount> [px|ppt]]
Resizes the currently focused container by _amount_, specified in pixels or
percentage points. If the units are omitted, floating containers are resized
in px and tiled containers by ppt. _amount_ will default to 10 if omitted.
*resize set* <width> [px|ppt] <height> [px|ppt]
Sets the width and height of the currently focused container to _width_ and
_height_, specified in pixels or percentage points. If the units are
omitted, floating containers are resized in px and tiled containers by ppt.
If _width_ or _height_ is 0, no resize is done on that axis.
*scratchpad show*
Shows a window from the scratchpad. Repeatedly using this command will
cycle through the windows in the scratchpad.
*split* vertical|v|horizontal|h|toggle|t
Splits the current container, vertically or horizontally. When _toggle_ is
specified, the current container is split opposite to the parent
container's layout.
*splith*
Equivalent to *split horizontal*
*splitv*
Equivalent to *split vertical*
*splitt*
Equivalent to *split toggle*
*sticky* enable|disable|toggle
"Sticks" a floating window to the current output so that it shows up on all
workspaces.
*swap* container with id|con\_id|mark <arg>
Swaps the position, geometry, and fullscreen status of two containers. The
first container can be selected either by criteria or focus. The second
container can be selected by _id_, _con\_id_, or _mark_. _id_ can only be
used with xwayland views. If the first container has focus, it will retain
focus unless it is moved to a different workspace or the second container
becomes fullscreen on the same workspace as the first container. In either
of those cases, the second container will gain focus.
The following commands may be used either in the configuration file or at
runtime.
*assign* <criteria> [→] [workspace] [number] <workspace>
Assigns views matching _criteria_ (see *CRITERIA* for details) to
_workspace_. The → (U+2192) is optional and cosmetic. This command is
equivalent to:
for\_window <criteria> move container to workspace <workspace>
*assign* <criteria> [→] output left|right|up|down|<name>
Assigns views matching _criteria_ (see *CRITERIA* for details) to the
specified output. The → (U+2192) is optional and cosmetic. This command is
equivalent to:
for\_window <criteria> move container to output <output>
*bindsym* [--release|--locked] <key combo> <command>
Binds _key combo_ to execute the sway command _command_ when pressed. You
may use XKB key names here (*xev*(1) is a good tool for discovering these).
With the flag _--release_, the command is executed when the key combo is
released. Unless the flag _--locked_ is set, the command will not be run
when a screen locking program is active.
Example:
# Execute firefox when alt, shift, and f are pressed together
bindsym Mod1+Shift+f exec firefox
*bindcode* [--release|--locked] <code> <command> is also available for
binding with key codes instead of key names.
*client.<class>* <border> <background> <text> <indicator> <child\_border>
Configures the color of window borders and title bars. All 5 colors are
required, with the exception of *client.background*, which requires exactly
one. Colors may be specified in hex, either as _#RRGGBB_ or _#RRGGBBAA_.
The available classes are:
*client.background*
Ignored (present for i3 compatibility).
*client.focused*
The window that has focus.
*client.focused\_inactive*
The most recently focused view within a container which is not focused.
*client.placeholder*
Ignored (present for i3 compatibility).
*client.unfocused*
A view that does not have focus.
*client.urgent*
A view with an urgency hint. *Note*: This is not currently implemented.
The meaning of each color is:
_border_
The border around the title bar.
_background_
The background of the title bar.
_text_
The text color of the title bar.
_indicator_
The color used to indicate where a new view will open. In a tiled
container, this would paint the right border of the current view if a
new view would be opened to the right.
_child\_border_
The border around the view itself.
The default colors are:
[- *class*
:[ _border_
:[ _background_
:[ _text_
:[ _indicator_
:[ _child\_border_
|[ *background*
: n/a
: #ffffff
: n/a
: n/a
: n/a
| *focused*
: #4c7899
: #285577
: #ffffff
: #2e9ef4
: #285577
| *focused\_inactive*
: #333333
: #5f676a
: #ffffff
: #484e50
: #5f676a
| *unfocused*
: #333333
: #222222
: #888888
: #292d2e
: #222222
| *urgent*
: #2f343a
: #900000
: #ffffff
: #900000
: #900000
| *placeholder*
: #000000
: #0c0c0c
: #ffffff
: #000000
: #0c0c0c
*debuglog* on|off|toggle
Enables, disables or toggles debug logging. _toggle_ cannot be used in the
configuration file.
*default\_border* normal|none|pixel [<n>]
Set default border style for new tiled windows.
*default\_floating\_border* normal|none|pixel [<n>]
Set default border style for new floating windows. This only applies to
windows that are spawned in floating mode, not windows that become floating
afterwards.
*exec* <shell command>
Executes _shell command_ with sh.
*exec\_always* <shell command>
Like *exec*, but the shell command will be executed _again_ after *reload*.
*floating\_maximum\_size* <width> x <height>
Specifies the maximum size of floating windows. -1 x -1 removes the upper
limit.
*floating\_minimum\_size* <width> x <height>
Specifies the minimum size of floating windows. The default is 75 x 50.
*floating\_modifier* <modifier> [normal|inverse]
When the _modifier_ key is held down, you may hold left click to move
windows, and right click to resize them. If _inverse_ is specified, left
click is used for resizing and right click for moving.
*floating\_scroll* up|right|down|left [command]
Sets a command to be executed when the mouse wheel is scrolled in the
specified direction while holding the floating modifier. Resets the
command, when given no arguments.
*focus\_follows\_mouse* yes|no
If set to _yes_, moving your mouse over a window will focus that window.
*focus\_wrapping* yes|no|force
This option determines what to do when attempting to focus over the edge
of a container. If set to _no_, the focused container will retain focus,
if there are no other containers in the direction. If set to _yes_, focus
will be wrapped to the opposite edge of the container, if there are no
other containers in the direction. If set to _force_, focus will be wrapped
to the opposite edge of the container, even if there are other containers
in the direction. Default is _yes_.
*font* <font>
Sets font for use in title bars in Pango format.
*for\_window* <criteria> <command>
Whenever a window that matches _criteria_ appears, run list of commands.
See *CRITERIA* for more details.
*force\_focus\_wrapping* yes|no
This option is a wrapper to support i3's legacy syntax. _no_ is equivalent
to _focus\_wrapping yes_ and _yes_ is equivalent to
_focus\_wrapping force_. This is only available for convenience. Please
use _focus\_wrapping_ instead when possible.
*gaps* edge\_gaps on|off|toggle
When _on_, gaps will be added between windows and workspace edges if the
inner gap is nonzero. When _off_, gaps will only be added between views.
_toggle_ cannot be used in the configuration file.
*gaps* <amount>
Sets _amount_ pixels of gap between windows and around each workspace.
*gaps* inner|outer <amount>
Sets default _amount_ pixels of _inner_ or _outer_ gap, where the former
affects spacing between views and the latter affects the space around each
workspace.
*gaps* inner|outer all|workspace|current set|plus|minus <amount>
Changes the gaps for the _inner_ or _outer_ gap. _all_ changes the gaps for
all views or workspace, _workspace_ changes gaps for all views in current
workspace (or current workspace), and _current_ changes gaps for the current
view or workspace.
*hide\_edge\_borders* none|vertical|horizontal|both|smart
Hides window borders adjacent to the screen edges. Default is _none_.
*input* <input\_device> *{* <commands...> *}*
_commands..._ after *{* will be interpreted as input commands applying to
the specified input device. For details, see *sway-input*(5). A newline is
required between *{* and the first command, and *}* must be alone on a
line.
\* may be used in lieu of a specific device name to configure all input
devices. A list of input device names may be obtained via *swaymsg -t
get\_inputs*.
*seat* <seat> *{* <commands...> *}*
_commands..._ after *{* will be interpreted as seat commands applying to
the specified seat. For details, see *sway-input*(5). A newline is required
between *{* and the first command, and *}* must be alone on a line.
*seat* <seat> cursor move|set <x> <y>
Move specified seat's cursor relative to current position or wrap to
absolute coordinates (with respect to the global coordinate space).
Specifying either value as 0 will not update that coordinate.
*seat* <seat> cursor press|release left|right|1|2|3...
Simulate pressing (or releasing) the specified mouse button on the
specified seat.
*kill*
Kills (closes) the currently focused container and all of its children.
*smart\_gaps* on|off
If smart\_gaps are _on_ gaps will only be enabled if a workspace has more
than one child.
*mark* --add|--replace [--toggle] <identifier>
Marks are arbitrary labels that can be used to identify certain windows and
then jump to them at a later time. By default, *mark* sets _identifier_ as
the only mark on a window. _--add_ will instead add _identifier_ to the
list of current marks. If _--toggle_ is specified mark will remove
_identifier_ if it is already marked.
*mode* <mode>
Switches to the specified mode. The default mode _default_.
*mode* [--pango\_markup] <mode> *{* <commands...> *}*
_commands..._ after *{* will be added to the specified mode. A newline is
required between *{* and the first command, and *}* must be alone on a
line. Only *bindsym* and *bindcode* commands are permitted in mode blocks.
If _--pango\_markup_ is given, then _mode_ will be interpreted as pango
markup.
*mouse\_warping* output|none
If _output_ is specified, the mouse will be moved to new outputs as you
move focus between them. Default is _output_.
*no\_focus* <criteria>
Prevents windows matching <criteria> from being focused automatically when
they're created. This has no effect on the first window in a workspace.
*output* <name> mode|resolution|res <WIDTHxHEIGHT>[@<RATE>[Hz]]
Configures the specified output to use the given mode. Modes are a
combination of width and height (in pixels) and a refresh rate that your
display can be configured to use. For a list of available modes for each
output, use *swaymsg -t get\_outputs*.
Examples:
output HDMI-A-1 mode 1920x1080
output HDMI-A-1 mode 1920x1080@60Hz
*output* <name> position|pos <X> <Y>
Places the specified output at the specific position in the global
coordinate space.
*output* <name> scale <factor>
Scales the specified output by the specified scale _factor_. An integer is
recommended, but fractional values are also supported. If a fractional
value are specified, be warned that it is not possible to faithfully
represent the contents of your windows - they will be rendered at the next
highest integral scale factor and downscaled. You may be better served by
setting an integral scale factor and adjusting the font size of your
applications to taste.
*output* <name> background|bg <file> <mode> [<fallback\_color>]
Sets the wallpaper for the given output to the specified file, using the
given scaling mode (one of "stretch", "fill", "fit", "center", "tile"). If
the specified file cannot be accessed or if the image does fill the entire
output, a fallback color may be provided to cover the rest of the output.
__fallback\_color__ should be specified as _#RRGGBB_. Alpha is not
supported.
**output** <name> background|bg <color> solid\_color
Sets the background of the given output to the specified color. _color_
should be specified as _#RRGGBB_. Alpha is not supported.
**output** <name> transform <transform>
Sets the background transform to the given value. Can be one of "90", "180",
"270" for rotation; or "flipped", "flipped-90", "flipped-180", "flipped-270"
to apply a rotation and flip, or "normal" to apply no transform.
*output* <name> disable|enable
Enables or disables the specified output (all outputs are enabled by
default).
*NOTES FOR THE OUTPUT COMMANDS*
You may combine output commands into one, like so:
output HDMI-A-1 mode 1920x1080 pos 1920,0 bg ~/wallpaper.png stretch
You can get a list of output names with *swaymsg -t get\_outputs*. You may also
match any output by using the output name "\*". Be sure to add this output
config after the others, or it will be matched instead of the others.
*show\_marks* yes|no
If *show\_marks* is yes, marks will be displayed in the window borders.
Any mark that starts with an underscore will not be drawn even if
*show\_marks* is yes. The default is _yes_.
*opacity* <value>
Set the opacity of the window between 0 (completely transparent) and 1
(completely opaque).
*unmark* [<identifier>]
*unmark* will remove _identifier_ from the list of current marks on a
window. If _identifier_ is omitted, all marks are removed.
*urgent* enable|disable|allow|deny
Using _enable_ or _disable_ manually sets or unsets the window's urgent
state. Using _allow_ or _deny_ controls the window's ability to set itself
as urgent. By default, windows are allowed to set their own urgency.
*workspace* [--no-auto-back-and-forth] [number] <name>
Switches to the specified workspace. The string "number" is optional and is
used to sort workspaces.
*workspace* prev|next
Switches to the next workspace on the current output or on the next output
if currently on the last workspace.
*workspace* prev\_on\_output|next\_on\_output
Switches to the next workspace on the current output.
*workspace* back_and_forth
Switches to the previously focused workspace.
*workspace* <name> output <output>
Specifies that workspace _name_ should be shown on the specified _output_.
*workspace\_auto\_back\_and\_forth* yes|no
When _yes_, repeating a workspace switch command will switch back to the
prior workspace. For example, if you are currently on workspace 1,
switch to workspace 2, then invoke the "workspace 2" command again, you
will be returned to workspace 1. Default is _no_.
*workspace\_layout* default|stacking|tabbed
Specifies the initial layout for new workspaces.
# CRITERIA
A criteria is a string in the form of, for example:
```
[class="[Rr]egex.*" title="some title"]
```
The string contains one or more (space separated) attribute/value pairs. They
are used by some commands to choose which views to execute actions on. All
attributes must match for the criteria to match.
Criteria may be used with either the *for\_window* or *assign* commands to
specify operations to perform on new views. A criteria may also be used to
perform specific commands (ones that normally act upon one window) on all views
that match that criteria. For example:
Focus on a window with the mark "IRC":
```
[con_mark="IRC"] focus
```
Kill all windows with the title "Emacs":
```
[class="Emacs"] kill
```
Mark all Firefox windows with "Browser":
```
[class="Firefox"] mark Browser
```
The following attributes may be matched with:
*app\_id*
Compare value against the app id. Can be a regular expression. If value is
\_\_focused\_\_, then the app id must be the same as that of the currently
focused window.
*class*
Compare value against the window class. Can be a regular expression. If
value is \_\_focused\_\_, then the window class must be the same as that of
the currently focused window.
*con\_id*
Compare against the internal container ID, which you can find via IPC. If
value is \_\_focused\_\_, then the id must be the same as that of the
currently focused window.
*con\_mark*
Compare against the window marks. Can be a regular expression.
*floating*
Matches floating windows.
*id*
Compare value against the X11 window ID. Must be numeric.
*instance*
Compare value against the window instance. Can be a regular expression. If
value is \_\_focused\_\_, then the window instance must be the same as that
of the currently focused window.
*shell*
Compare value against the window shell, such as "xdg\_shell" or "xwayland".
Can be a regular expression. If value is \_\_focused\_\_, then the shell
must be the same as that of the currently focused window.
*tiling*
Matches tiling windows.
*title*
Compare against the window title. Can be a regular expression. If value is
\_\_focused\_\_, then the window title must be the same as that of the
currently focused window.
*urgent*
Compares the urgent state of the window. Can be "first", "last", "latest",
"newest", "oldest" or "recent".
*window\_role*
Compare against the window role (WM\_WINDOW\_ROLE). Can be a regular
expression. If value is \_\_focused\_\_, then the window role must be the
same as that of the currently focused window.
*window\_type*
Compare against the window type (\_NET\_WM\_WINDOW\_TYPE). Possible values
are normal, dialog, utility, toolbar, splash, menu, dropdown\_menu,
popup\_menu, tooltip and notification.
*workspace*
Compare against the workspace name for this view. Can be a regular
expression. If the value is \_\_focused\_\_, then all the views on the
currently focused workspace matches.
# SEE ALSO
*sway*(1) *sway-input*(5) *sway-bar*(5)