swayfx/sway.5.txt
S. Christoffer Eliesen abc5fbfaec Learn "gaps edge_gaps <on|off|toggle>".
When yes, the old behaviour of adding half the inner gap around each
view is used.

When no, don't add any gap when an edge of the view aligns with the
workspace. The result is inner gap only between views, not against the
workspace edge.

The algorithm is not perfect because it means the extra space is
distributed amongst edge-aligned views only, but it's simple, looks good
and it works.
2015-11-04 13:21:10 +01:00

164 lines
5.8 KiB
Plaintext

/////
vim:set ts=4 sw=4 tw=82 noet:
/////
sway (5)
========
Name
----
sway - configuration file and commands
Description
-----------
A sway configuration file is a list of sway commands that are executed by sway on
startup. These commands usually consist of setting your preferences and setting
key bindings. An example config is likely present in /etc/sway/config for you to
check out.
All of these commands may be issued at runtime through **sway-msg**(1).
Commands
--------
**bindsym** <key combo> <command>::
Binds _key combo_ to execute _command_ when pressed. You may use XKB key
names here (**xev**(1) is a good tool for discovering them). An example
bindsym command would be _bindsym Mod1+Shift+f exec firefox_, which would
execute Firefox if the alt, shift, and F keys are pressed together. Any
valid sway command is eligible to be bound to a key combo.
**exec** <shell command>::
Executes _shell command_ with sh.
**exec_always** <shell command>::
Like exec, but the shell command will be executed _again_ after *reload* or
*restart* is executed.
**exit**::
Exit sway and end your Wayland session.
**floating** toggle::
Toggles the "floating" status of the focused view.
**floating_modifier** <modifier>::
When the _modifier_ key is held down, you may use left click to drag floating
windows, and right click to resize them. Unlike i3, this modifier may also be
used to resize and move windows that are tiled.
**focus** <direction>::
Direction may be one of _up_, _down_, _left_, _right_, or _parent_. The
directional focus commands will move the focus in that direction. The parent
focus command will change the focus to the parent of the currently focused
container, which is useful, for example, to open a sibling of the parent
container, or to move the entire container around.
**focus** output <direction|name>::
Direction may be one of _up_, _down_, _left_, _right_. The directional focus
commands will move the focus to the output in that direction. When name is
given the focus is changed to the output with that name.
**focus** mode_toggle::
Toggles focus between floating view and tiled view.
**focus_follows_mouse** <yes|no>::
If set to _yes_, the currently focused view will change as you move your
mouse around the screen to the view that ends up underneath your mouse.
**fullscreen**::
Toggles fullscreen status for the focused view.
**gaps** edge_gaps <on|off|toggle>::
Whether or not to add gaps between views and workspace edges if amount of
inner gap is not zero. When _no_, no gap is added where the view is aligned to
the workspace edge, effectively creating gaps only between views.
**gaps** <amount>::
Sets default _amount_ pixels as the gap between each view, and around each
workspace.
**gaps** <inner|outer> <amount>::
Sets default _amount_ pixels as the _inner_ or _outer_ gap, where the former
affects spacing between views and the latter affects the space around each
workspace.
**gaps** <inner|outer> <all|workspace|current> <set|plus|minus> <amount>::
Changes the gaps for the _inner_ or _outer_ gap. _all_ changes the gaps for
all views or workspace, _workspace_ changes gaps for all views in current
workspace (or current workspace), and _current_ changes gaps for the current
view or workspace.
**kill**::
Closes the currently focused view.
**layout** <mode>::
Sets the layout mode of the focused container. _mode_ can be one of _splith_,
_splitv_, or _toggle split_.
**mode** <mode_name>::
Switches to the given mode_name. the default mode is simply _default_. To
create a new mode in config append _{_ to this command, the following lines
will be keybinds for that mode, and _}_ on its own line to close the block.
**move** <left|right|up|down>::
Moves the focused container _left_, _right_, _up_, or _down_.
**move** <container|window> to workspace <name>::
Moves the focused container to the workspace identified by _name_.
_name_ may be a special workspace name. See **workspace**.
**move** <container|window|workspace> to output <name|direction>::
Moves the focused container or workspace to the output identified by _name_ or
_direction_. _direction_ may be one of _up_, _down_, _left_, _right_.
**mouse_warping** <output|none>::
When _output_: place mouse at center of newly focused window when changing
output. When _none_: don't move mouse.
**output** <name> <resolution|res WIDTHxHEIGHT> <position|pos X,Y>::
Configures the specified output. It will use the given resolution and be
arranged at the given position in the layout tree. You may omit either of
these parameters if you only want to set one of them.
**output** <name> disable::
Disables the specified output.
**reload**::
Reloads the sway config file without restarting sway.
**resize** <shrink|grow> <width|height> <amount>::
Resizes the currently focused container or view by _amount_. _amount_ can be
specified as "n px" or "n ppt" or "n px or n ppt".
**seamless_mouse** <on|off>::
Change output seamlessly when pointer touches edge of output. Outputs need to
be configured with perfectly aligned adjacent positions for this option to
have any effect.
**set** <name> <value>::
Creates a substitution for _value_ that can be used with $_name_ in other
commands.
**split** <vertical|v|horizontal|h>::
Splits the current container, vertically or horizontally.
**splith**::
Equivalent to **split horizontal**.
**splitv**::
Equivalent to **split vertical**.
**workspace** <name>::
Switches to the specified workspace.
**workspace** <prev|next>::
Switches to the next workspace on the current output or on the next output
if currently on the last workspace.
**workspace** <prev_on_output|next_on_output>::
Switches to the next workspace on the current output.
**workspace** <name> output <output>::
Specifies that the workspace named _name_ should appear on the specified
_output_.