vello/piet-gpu/shader/path_coarse.comp

// SPDX-License-Identifier: Apache-2.0 OR MIT OR Unlicense

// Coarse rasterization of path segments.

// Allocation and initialization of tiles for paths.

#version 450
#extension GL_GOOGLE_include_directive : enable

#include "mem.h"
#include "setup.h"

#define LG_COARSE_WG 5
#define COARSE_WG (1 << LG_COARSE_WG)

layout(local_size_x = COARSE_WG, local_size_y = 1) in;

layout(set = 0, binding = 1) readonly buffer ConfigBuf {
    Config conf;
};

#include "pathseg.h"
#include "tile.h"

// scale factors useful for converting coordinates to tiles
#define SX (1.0 / float(TILE_WIDTH_PX))
#define SY (1.0 / float(TILE_HEIGHT_PX))

#define ACCURACY 0.25
#define Q_ACCURACY (ACCURACY * 0.1)
#define REM_ACCURACY (ACCURACY - Q_ACCURACY)
#define MAX_HYPOT2 (432.0 * Q_ACCURACY * Q_ACCURACY)

vec2 eval_quad(vec2 p0, vec2 p1, vec2 p2, float t) {
    float mt = 1.0 - t;
    return p0 * (mt * mt) + (p1 * (mt * 2.0) + p2 * t) * t;
}

vec2 eval_cubic(vec2 p0, vec2 p1, vec2 p2, vec2 p3, float t) {
    float mt = 1.0 - t;
    return p0 * (mt * mt * mt) + (p1 * (mt * mt * 3.0) + (p2 * (mt * 3.0) + p3 * t) * t) * t;
}

struct SubdivResult {
    float val;
    float a0;
    float a2;
};

/// An approximation to $\int (1 + 4x^2) ^ -0.25 dx$
///
/// This is used for flattening curves.
#define D 0.67
float approx_parabola_integral(float x) {
    return x * inversesqrt(sqrt(1.0 - D + (D * D * D * D + 0.25 * x * x)));
}

/// An approximation to the inverse parabola integral.
#define B 0.39
float approx_parabola_inv_integral(float x) {
    return x * sqrt(1.0 - B + (B * B + 0.25 * x * x));
}

SubdivResult estimate_subdiv(vec2 p0, vec2 p1, vec2 p2, float sqrt_tol) {
    vec2 d01 = p1 - p0;
    vec2 d12 = p2 - p1;
    vec2 dd = d01 - d12;
    float cross = (p2.x - p0.x) * dd.y - (p2.y - p0.y) * dd.x;
    float x0 = (d01.x * dd.x + d01.y * dd.y) / cross;
    float x2 = (d12.x * dd.x + d12.y * dd.y) / cross;
    float scale = abs(cross / (length(dd) * (x2 - x0)));

    float a0 = approx_parabola_integral(x0);
    float a2 = approx_parabola_integral(x2);
    float val = 0.0;
    if (scale < 1e9) {
        float da = abs(a2 - a0);
        float sqrt_scale = sqrt(scale);
        if (sign(x0) == sign(x2)) {
            val = da * sqrt_scale;
        } else {
            float xmin = sqrt_tol / sqrt_scale;
            val = sqrt_tol * da / approx_parabola_integral(xmin);
        }
    }
    return SubdivResult(val, a0, a2);
}

void main() {
    uint element_ix = gl_GlobalInvocationID.x;
    PathSegRef ref = PathSegRef(conf.pathseg_alloc.offset + element_ix * PathSeg_size);

    PathSegTag tag = PathSegTag(PathSeg_Nop, 0);
    if (element_ix < conf.n_pathseg) {
        tag = PathSeg_tag(conf.pathseg_alloc, ref);
    }
    bool mem_ok = mem_error == NO_ERROR;
    switch (tag.tag) {
    case PathSeg_Cubic:
        PathCubic cubic = PathSeg_Cubic_read(conf.pathseg_alloc, ref);

        uint trans_ix = cubic.trans_ix;
        if (trans_ix > 0) {
            TransformSegRef trans_ref = TransformSegRef(conf.trans_alloc.offset + (trans_ix - 1) * TransformSeg_size);
            TransformSeg trans = TransformSeg_read(conf.trans_alloc, trans_ref);
            cubic.p0 = trans.mat.xy * cubic.p0.x + trans.mat.zw * cubic.p0.y + trans.translate;
            cubic.p1 = trans.mat.xy * cubic.p1.x + trans.mat.zw * cubic.p1.y + trans.translate;
            cubic.p2 = trans.mat.xy * cubic.p2.x + trans.mat.zw * cubic.p2.y + trans.translate;
            cubic.p3 = trans.mat.xy * cubic.p3.x + trans.mat.zw * cubic.p3.y + trans.translate;
        }

        vec2 err_v = 3.0 * (cubic.p2 - cubic.p1) + cubic.p0 - cubic.p3;
        float err = err_v.x * err_v.x + err_v.y * err_v.y;
        // The number of quadratics.
        uint n_quads = max(uint(ceil(pow(err * (1.0 / MAX_HYPOT2), 1.0 / 6.0))), 1);
        // Iterate over quadratics and tote up the estimated number of segments.
        float val = 0.0;
        vec2 qp0 = cubic.p0;
        float step = 1.0 / float(n_quads);
        for (uint i = 0; i < n_quads; i++) {
            float t = float(i + 1) * step;
            vec2 qp2 = eval_cubic(cubic.p0, cubic.p1, cubic.p2, cubic.p3, t);
            vec2 qp1 = eval_cubic(cubic.p0, cubic.p1, cubic.p2, cubic.p3, t - 0.5 * step);
            qp1 = 2.0 * qp1 - 0.5 * (qp0 + qp2);
            SubdivResult params = estimate_subdiv(qp0, qp1, qp2, sqrt(REM_ACCURACY));
            val += params.val;

            qp0 = qp2;
        }
        uint n = max(uint(ceil(val * 0.5 / sqrt(REM_ACCURACY))), 1);

        bool is_stroke = fill_mode_from_flags(tag.flags) == MODE_STROKE;
        uint path_ix = cubic.path_ix;
        Path path = Path_read(conf.tile_alloc, PathRef(conf.tile_alloc.offset + path_ix * Path_size));
        Alloc path_alloc = new_alloc(path.tiles.offset, (path.bbox.z - path.bbox.x) * (path.bbox.w - path.bbox.y) * Tile_size, mem_ok);
        ivec4 bbox = ivec4(path.bbox);
        vec2 p0 = cubic.p0;
        qp0 = cubic.p0;
        float v_step = val / float(n);
        int n_out = 1;
        float val_sum = 0.0;
        for (uint i = 0; i < n_quads; i++) {
            float t = float(i + 1) * step;
            vec2 qp2 = eval_cubic(cubic.p0, cubic.p1, cubic.p2, cubic.p3, t);
            vec2 qp1 = eval_cubic(cubic.p0, cubic.p1, cubic.p2, cubic.p3, t - 0.5 * step);
            qp1 = 2.0 * qp1 - 0.5 * (qp0 + qp2);
            SubdivResult params = estimate_subdiv(qp0, qp1, qp2, sqrt(REM_ACCURACY));
            float u0 = approx_parabola_inv_integral(params.a0);
            float u2 = approx_parabola_inv_integral(params.a2);
            float uscale = 1.0 / (u2 - u0);
            float target = float(n_out) * v_step;
            while (n_out == n || target < val_sum + params.val) {
                vec2 p1;
                if (n_out == n) {
                    p1 = cubic.p3;
                } else {
                    float u = (target - val_sum) / params.val;
                    float a = mix(params.a0, params.a2, u);
                    float au = approx_parabola_inv_integral(a);
                    float t = (au - u0) * uscale;
                    p1 = eval_quad(qp0, qp1, qp2, t);
                }

                // Output line segment

                // Bounding box of element in pixel coordinates.
                float xmin = min(p0.x, p1.x) - cubic.stroke.x;
                float xmax = max(p0.x, p1.x) + cubic.stroke.x;
                float ymin = min(p0.y, p1.y) - cubic.stroke.y;
                float ymax = max(p0.y, p1.y) + cubic.stroke.y;
                float dx = p1.x - p0.x;
                float dy = p1.y - p0.y;
                // Set up for per-scanline coverage formula, below.
                float invslope = abs(dy) < 1e-9 ? 1e9 : dx / dy;
                float c = (cubic.stroke.x + abs(invslope) * (0.5 * float(TILE_HEIGHT_PX) + cubic.stroke.y)) * SX;
                float b = invslope; // Note: assumes square tiles, otherwise scale.
                float a = (p0.x - (p0.y - 0.5 * float(TILE_HEIGHT_PX)) * b) * SX;

                int x0 = int(floor(xmin * SX));
                int x1 = int(floor(xmax * SX) + 1);
                int y0 = int(floor(ymin * SY));
                int y1 = int(floor(ymax * SY) + 1);

                x0 = clamp(x0, bbox.x, bbox.z);
                y0 = clamp(y0, bbox.y, bbox.w);
                x1 = clamp(x1, bbox.x, bbox.z);
                y1 = clamp(y1, bbox.y, bbox.w);
                float xc = a + b * float(y0);
                int stride = bbox.z - bbox.x;
                int base = (y0 - bbox.y) * stride - bbox.x;
                // TODO: can be tighter, use c to bound width
                uint n_tile_alloc = uint((x1 - x0) * (y1 - y0));
                // Consider using subgroups to aggregate atomic add.
                MallocResult tile_alloc = malloc(n_tile_alloc * TileSeg_size);
                if (tile_alloc.failed || !mem_ok) {
                    return;
                }
                uint tile_offset = tile_alloc.alloc.offset;

                TileSeg tile_seg;

                int xray = int(floor(p0.x*SX));
                int last_xray = int(floor(p1.x*SX));
                if (p0.y > p1.y) {
                    int tmp = xray;
                    xray = last_xray;
                    last_xray = tmp;
                }
                for (int y = y0; y < y1; y++) {
                    float tile_y0 = float(y * TILE_HEIGHT_PX);
                    int xbackdrop = max(xray + 1, bbox.x);
                    if (!is_stroke && min(p0.y, p1.y) < tile_y0 && xbackdrop < bbox.z) {
                        int backdrop = p1.y < p0.y ? 1 : -1;
                        TileRef tile_ref = Tile_index(path.tiles, uint(base + xbackdrop));
                        uint tile_el = tile_ref.offset >> 2;
                        if (touch_mem(path_alloc, tile_el + 1)) {
                            atomicAdd(memory[tile_el + 1], backdrop);
                        }
                    }

                    // next_xray is the xray for the next scanline; the line segment intersects
                    // all tiles between xray and next_xray.
                    int next_xray = last_xray;
                    if (y < y1 - 1) {
                        float tile_y1 = float((y + 1) * TILE_HEIGHT_PX);
                        float x_edge = mix(p0.x, p1.x, (tile_y1 - p0.y) / dy);
                        next_xray = int(floor(x_edge*SX));
                    }

                    int min_xray = min(xray, next_xray);
                    int max_xray = max(xray, next_xray);
                    int xx0 = min(int(floor(xc - c)), min_xray);
                    int xx1 = max(int(ceil(xc + c)), max_xray + 1);
                    xx0 = clamp(xx0, x0, x1);
                    xx1 = clamp(xx1, x0, x1);

                    for (int x = xx0; x < xx1; x++) {
                        float tile_x0 = float(x * TILE_WIDTH_PX);
                        TileRef tile_ref = Tile_index(TileRef(path.tiles.offset), uint(base + x));
                        uint tile_el = tile_ref.offset >> 2;
                        uint old = 0;
                        if (touch_mem(path_alloc, tile_el)) {
                            old = atomicExchange(memory[tile_el], tile_offset);
                        }
                        tile_seg.origin = p0;
                        tile_seg.vector = p1 - p0;
                        float y_edge = 0.0;
                        if (!is_stroke) {
                            y_edge = mix(p0.y, p1.y, (tile_x0 - p0.x) / dx);
                            if (min(p0.x, p1.x) < tile_x0) {
                                vec2 p = vec2(tile_x0, y_edge);
                                if (p0.x > p1.x) {
                                    tile_seg.vector = p - p0;
                                } else {
                                    tile_seg.origin = p;
                                    tile_seg.vector = p1 - p;
                                }
                                // kernel4 uses sign(vector.x) for the sign of the intersection backdrop.
                                // Nudge zeroes towards the intended sign.
                                if (tile_seg.vector.x == 0) {
                                    tile_seg.vector.x = sign(p1.x - p0.x)*1e-9;
                                }
                            }
                            if (x <= min_xray || max_xray < x) {
                                // Reject inconsistent intersections.
                                y_edge = 1e9;
                            }
                        }
                        tile_seg.y_edge = y_edge;
                        tile_seg.next.offset = old;
                        TileSeg_write(tile_alloc.alloc, TileSegRef(tile_offset), tile_seg);
                        tile_offset += TileSeg_size;
                    }
                    xc += b;
                    base += stride;
                    xray = next_xray;
                }

                n_out += 1;
                target += v_step;
                p0 = p1;
            }
            val_sum += params.val;

            qp0 = qp2;
        }

        break;
    }
}