swayfx/sway/input/seatop_default.c

786 lines
26 KiB
C
Raw Normal View History

Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
#define _POSIX_C_SOURCE 200809L
#include <float.h>
#include <libevdev/libevdev.h>
#include <wlr/types/wlr_cursor.h>
#include <wlr/types/wlr_tablet_v2.h>
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
#include <wlr/types/wlr_xcursor_manager.h>
#include "sway/input/cursor.h"
#include "sway/input/seat.h"
#include "sway/input/tablet.h"
#include "sway/output.h"
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
#include "sway/tree/view.h"
#include "sway/tree/workspace.h"
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
#include "log.h"
#if HAVE_XWAYLAND
#include "sway/xwayland.h"
#endif
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
struct seatop_default_event {
struct sway_node *previous_node;
uint32_t pressed_buttons[SWAY_CURSOR_PRESSED_BUTTONS_CAP];
size_t pressed_button_count;
};
/*-----------------------------------------\
* Functions shared by multiple callbacks /
*---------------------------------------*/
/**
* Determine if the edge of the given container is on the edge of the
* workspace/output.
*/
static bool edge_is_external(struct sway_container *cont, enum wlr_edges edge) {
enum sway_container_layout layout = L_NONE;
switch (edge) {
case WLR_EDGE_TOP:
case WLR_EDGE_BOTTOM:
layout = L_VERT;
break;
case WLR_EDGE_LEFT:
case WLR_EDGE_RIGHT:
layout = L_HORIZ;
break;
case WLR_EDGE_NONE:
sway_assert(false, "Never reached");
return false;
}
// Iterate the parents until we find one with the layout we want,
// then check if the child has siblings between it and the edge.
while (cont) {
if (container_parent_layout(cont) == layout) {
list_t *siblings = container_get_siblings(cont);
int index = list_find(siblings, cont);
if (index > 0 && (edge == WLR_EDGE_LEFT || edge == WLR_EDGE_TOP)) {
return false;
}
if (index < siblings->length - 1 &&
(edge == WLR_EDGE_RIGHT || edge == WLR_EDGE_BOTTOM)) {
return false;
}
}
cont = cont->parent;
}
return true;
}
static enum wlr_edges find_edge(struct sway_container *cont,
struct wlr_surface *surface, struct sway_cursor *cursor) {
if (!cont->view || (surface && cont->view->surface != surface)) {
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
return WLR_EDGE_NONE;
}
if (cont->border == B_NONE || !cont->border_thickness ||
cont->border == B_CSD) {
return WLR_EDGE_NONE;
}
enum wlr_edges edge = 0;
if (cursor->cursor->x < cont->x + cont->border_thickness) {
edge |= WLR_EDGE_LEFT;
}
if (cursor->cursor->y < cont->y + cont->border_thickness) {
edge |= WLR_EDGE_TOP;
}
if (cursor->cursor->x >= cont->x + cont->width - cont->border_thickness) {
edge |= WLR_EDGE_RIGHT;
}
if (cursor->cursor->y >= cont->y + cont->height - cont->border_thickness) {
edge |= WLR_EDGE_BOTTOM;
}
return edge;
}
/**
* If the cursor is over a _resizable_ edge, return the edge.
* Edges that can't be resized are edges of the workspace.
*/
enum wlr_edges find_resize_edge(struct sway_container *cont,
struct wlr_surface *surface, struct sway_cursor *cursor) {
enum wlr_edges edge = find_edge(cont, surface, cursor);
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
if (edge && !container_is_floating(cont) && edge_is_external(cont, edge)) {
return WLR_EDGE_NONE;
}
return edge;
}
/**
* Return the mouse binding which matches modifier, click location, release,
* and pressed button state, otherwise return null.
*/
static struct sway_binding* get_active_mouse_binding(
struct seatop_default_event *e, list_t *bindings, uint32_t modifiers,
bool release, bool on_titlebar, bool on_border, bool on_content,
bool on_workspace, const char *identifier) {
uint32_t click_region =
((on_titlebar || on_workspace) ? BINDING_TITLEBAR : 0) |
((on_border || on_workspace) ? BINDING_BORDER : 0) |
((on_content || on_workspace) ? BINDING_CONTENTS : 0);
struct sway_binding *current = NULL;
for (int i = 0; i < bindings->length; ++i) {
struct sway_binding *binding = bindings->items[i];
if (modifiers ^ binding->modifiers ||
e->pressed_button_count != (size_t)binding->keys->length ||
release != (binding->flags & BINDING_RELEASE) ||
!(click_region & binding->flags) ||
(on_workspace &&
(click_region & binding->flags) != click_region) ||
(strcmp(binding->input, identifier) != 0 &&
strcmp(binding->input, "*") != 0)) {
continue;
}
bool match = true;
for (size_t j = 0; j < e->pressed_button_count; j++) {
uint32_t key = *(uint32_t *)binding->keys->items[j];
if (key != e->pressed_buttons[j]) {
match = false;
break;
}
}
if (!match) {
continue;
}
if (!current || strcmp(current->input, "*") == 0) {
current = binding;
if (strcmp(current->input, identifier) == 0) {
// If a binding is found for the exact input, quit searching
break;
}
}
}
return current;
}
/**
* Remove a button (and duplicates) from the sorted list of currently pressed
* buttons.
*/
static void state_erase_button(struct seatop_default_event *e,
uint32_t button) {
size_t j = 0;
for (size_t i = 0; i < e->pressed_button_count; ++i) {
if (i > j) {
e->pressed_buttons[j] = e->pressed_buttons[i];
}
if (e->pressed_buttons[i] != button) {
++j;
}
}
while (e->pressed_button_count > j) {
--e->pressed_button_count;
e->pressed_buttons[e->pressed_button_count] = 0;
}
}
/**
* Add a button to the sorted list of currently pressed buttons, if there
* is space.
*/
static void state_add_button(struct seatop_default_event *e, uint32_t button) {
if (e->pressed_button_count >= SWAY_CURSOR_PRESSED_BUTTONS_CAP) {
return;
}
size_t i = 0;
while (i < e->pressed_button_count && e->pressed_buttons[i] < button) {
++i;
}
size_t j = e->pressed_button_count;
while (j > i) {
e->pressed_buttons[j] = e->pressed_buttons[j - 1];
--j;
}
e->pressed_buttons[i] = button;
e->pressed_button_count++;
}
/*-------------------------------------------\
* Functions used by handle_tablet_tool_tip /
*-----------------------------------------*/
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
static void handle_tablet_tool_tip(struct sway_seat *seat,
struct sway_tablet_tool *tool, uint32_t time_msec,
enum wlr_tablet_tool_tip_state state) {
if (state == WLR_TABLET_TOOL_TIP_UP) {
wlr_tablet_v2_tablet_tool_notify_up(tool->tablet_v2_tool);
return;
}
struct sway_cursor *cursor = seat->cursor;
struct wlr_surface *surface = NULL;
double sx, sy;
struct sway_node *node = node_at_coords(seat,
cursor->cursor->x, cursor->cursor->y, &surface, &sx, &sy);
if (!sway_assert(surface,
"Expected null-surface tablet input to route through pointer emulation")) {
return;
}
struct sway_container *cont = node && node->type == N_CONTAINER ?
node->sway_container : NULL;
if (wlr_surface_is_layer_surface(surface)) {
// Handle tapping a layer surface
struct wlr_layer_surface_v1 *layer =
wlr_layer_surface_v1_from_wlr_surface(surface);
if (layer->current.keyboard_interactive) {
seat_set_focus_layer(seat, layer);
}
} else if (cont) {
bool is_floating_or_child = container_is_floating_or_child(cont);
bool is_fullscreen_or_child = container_is_fullscreen_or_child(cont);
struct wlr_keyboard *keyboard = wlr_seat_get_keyboard(seat->wlr_seat);
bool mod_pressed = keyboard &&
(wlr_keyboard_get_modifiers(keyboard) & config->floating_mod);
// Handle beginning floating move
if (is_floating_or_child && !is_fullscreen_or_child && mod_pressed) {
seat_set_focus_container(seat,
seat_get_focus_inactive_view(seat, &cont->node));
seatop_begin_move_floating(seat, container_toplevel_ancestor(cont));
return;
}
// Handle moving a tiling container
if (config->tiling_drag && mod_pressed && !is_floating_or_child &&
cont->fullscreen_mode == FULLSCREEN_NONE) {
seatop_begin_move_tiling(seat, cont);
return;
}
// Handle tapping on a container surface
seat_set_focus_container(seat, cont);
seatop_begin_down(seat, node->sway_container, time_msec, sx, sy);
}
#if HAVE_XWAYLAND
// Handle tapping on an xwayland unmanaged view
else if (wlr_surface_is_xwayland_surface(surface)) {
struct wlr_xwayland_surface *xsurface =
wlr_xwayland_surface_from_wlr_surface(surface);
if (xsurface->override_redirect &&
wlr_xwayland_or_surface_wants_focus(xsurface)) {
struct wlr_xwayland *xwayland = server.xwayland.wlr_xwayland;
wlr_xwayland_set_seat(xwayland, seat->wlr_seat);
seat_set_focus_surface(seat, xsurface->surface, false);
}
}
#endif
wlr_tablet_v2_tablet_tool_notify_down(tool->tablet_v2_tool);
wlr_tablet_tool_v2_start_implicit_grab(tool->tablet_v2_tool);
}
/*----------------------------------\
* Functions used by handle_button /
*--------------------------------*/
static bool trigger_pointer_button_binding(struct sway_seat *seat,
struct wlr_input_device *device, uint32_t button,
enum wlr_button_state state, uint32_t modifiers,
bool on_titlebar, bool on_border, bool on_contents, bool on_workspace) {
// We can reach this for non-pointer devices if we're currently emulating
// pointer input for one. Emulated input should not trigger bindings. The
// device can be NULL if this is synthetic (e.g. swaymsg-generated) input.
if (device && device->type != WLR_INPUT_DEVICE_POINTER) {
return false;
}
struct seatop_default_event *e = seat->seatop_data;
char *device_identifier = device ? input_device_get_identifier(device)
: strdup("*");
struct sway_binding *binding = NULL;
if (state == WLR_BUTTON_PRESSED) {
state_add_button(e, button);
binding = get_active_mouse_binding(e,
config->current_mode->mouse_bindings, modifiers, false,
on_titlebar, on_border, on_contents, on_workspace,
device_identifier);
} else {
binding = get_active_mouse_binding(e,
config->current_mode->mouse_bindings, modifiers, true,
on_titlebar, on_border, on_contents, on_workspace,
device_identifier);
state_erase_button(e, button);
}
free(device_identifier);
if (binding) {
seat_execute_command(seat, binding);
return true;
}
return false;
}
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
static void handle_button(struct sway_seat *seat, uint32_t time_msec,
struct wlr_input_device *device, uint32_t button,
enum wlr_button_state state) {
struct sway_cursor *cursor = seat->cursor;
// Determine what's under the cursor
struct wlr_surface *surface = NULL;
double sx, sy;
struct sway_node *node = node_at_coords(seat,
cursor->cursor->x, cursor->cursor->y, &surface, &sx, &sy);
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
struct sway_container *cont = node && node->type == N_CONTAINER ?
node->sway_container : NULL;
bool is_floating = cont && container_is_floating(cont);
bool is_floating_or_child = cont && container_is_floating_or_child(cont);
bool is_fullscreen_or_child = cont && container_is_fullscreen_or_child(cont);
enum wlr_edges edge = cont ? find_edge(cont, surface, cursor) : WLR_EDGE_NONE;
2019-08-08 00:02:07 +10:00
enum wlr_edges resize_edge = cont && edge ?
find_resize_edge(cont, surface, cursor) : WLR_EDGE_NONE;
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
bool on_border = edge != WLR_EDGE_NONE;
bool on_contents = cont && !on_border && surface;
bool on_workspace = node && node->type == N_WORKSPACE;
bool on_titlebar = cont && !on_border && !surface;
struct wlr_keyboard *keyboard = wlr_seat_get_keyboard(seat->wlr_seat);
uint32_t modifiers = keyboard ? wlr_keyboard_get_modifiers(keyboard) : 0;
// Handle mouse bindings
if (trigger_pointer_button_binding(seat, device, button, state, modifiers,
on_titlebar, on_border, on_contents, on_workspace)) {
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
return;
}
// Handle clicking an empty workspace
if (node && node->type == N_WORKSPACE) {
if (state == WLR_BUTTON_PRESSED) {
seat_set_focus(seat, node);
}
seat_pointer_notify_button(seat, time_msec, button, state);
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
return;
}
// Handle clicking a layer surface
if (surface && wlr_surface_is_layer_surface(surface)) {
struct wlr_layer_surface_v1 *layer =
wlr_layer_surface_v1_from_wlr_surface(surface);
if (layer->current.keyboard_interactive) {
seat_set_focus_layer(seat, layer);
}
seat_pointer_notify_button(seat, time_msec, button, state);
return;
}
// Handle tiling resize via border
if (cont && resize_edge && button == BTN_LEFT &&
state == WLR_BUTTON_PRESSED && !is_floating) {
// If a resize is triggered on a tabbed or stacked container, change
// focus to the tab which already had inactive focus -- otherwise, we'd
// change the active tab when the user probably just wanted to resize.
struct sway_container *cont_to_focus = cont;
enum sway_container_layout layout = container_parent_layout(cont);
if (layout == L_TABBED || layout == L_STACKED) {
cont_to_focus = seat_get_focus_inactive_view(seat, &cont->parent->node);
}
seat_set_focus_container(seat, cont_to_focus);
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
seatop_begin_resize_tiling(seat, cont, edge);
return;
}
// Handle tiling resize via mod
bool mod_pressed = modifiers & config->floating_mod;
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
if (cont && !is_floating_or_child && mod_pressed &&
state == WLR_BUTTON_PRESSED) {
uint32_t btn_resize = config->floating_mod_inverse ?
BTN_LEFT : BTN_RIGHT;
if (button == btn_resize) {
edge = 0;
edge |= cursor->cursor->x > cont->x + cont->width / 2 ?
WLR_EDGE_RIGHT : WLR_EDGE_LEFT;
edge |= cursor->cursor->y > cont->y + cont->height / 2 ?
WLR_EDGE_BOTTOM : WLR_EDGE_TOP;
const char *image = NULL;
if (edge == (WLR_EDGE_LEFT | WLR_EDGE_TOP)) {
image = "nw-resize";
} else if (edge == (WLR_EDGE_TOP | WLR_EDGE_RIGHT)) {
image = "ne-resize";
} else if (edge == (WLR_EDGE_RIGHT | WLR_EDGE_BOTTOM)) {
image = "se-resize";
} else if (edge == (WLR_EDGE_BOTTOM | WLR_EDGE_LEFT)) {
image = "sw-resize";
}
cursor_set_image(seat->cursor, image, NULL);
seat_set_focus_container(seat, cont);
seatop_begin_resize_tiling(seat, cont, edge);
return;
}
}
// Handle beginning floating move
if (cont && is_floating_or_child && !is_fullscreen_or_child &&
state == WLR_BUTTON_PRESSED) {
uint32_t btn_move = config->floating_mod_inverse ? BTN_RIGHT : BTN_LEFT;
2019-08-11 01:03:20 +10:00
if (button == btn_move && (mod_pressed || on_titlebar)) {
seat_set_focus_container(seat,
seat_get_focus_inactive_view(seat, &cont->node));
seatop_begin_move_floating(seat, container_toplevel_ancestor(cont));
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
return;
}
}
// Handle beginning floating resize
if (cont && is_floating_or_child && !is_fullscreen_or_child &&
state == WLR_BUTTON_PRESSED) {
// Via border
if (button == BTN_LEFT && resize_edge != WLR_EDGE_NONE) {
seatop_begin_resize_floating(seat, cont, resize_edge);
return;
}
// Via mod+click
uint32_t btn_resize = config->floating_mod_inverse ?
BTN_LEFT : BTN_RIGHT;
if (mod_pressed && button == btn_resize) {
struct sway_container *floater = container_toplevel_ancestor(cont);
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
edge = 0;
edge |= cursor->cursor->x > floater->x + floater->width / 2 ?
WLR_EDGE_RIGHT : WLR_EDGE_LEFT;
edge |= cursor->cursor->y > floater->y + floater->height / 2 ?
WLR_EDGE_BOTTOM : WLR_EDGE_TOP;
seatop_begin_resize_floating(seat, floater, edge);
return;
}
}
// Handle moving a tiling container
if (config->tiling_drag && (mod_pressed || on_titlebar) &&
state == WLR_BUTTON_PRESSED && !is_floating_or_child &&
cont && cont->fullscreen_mode == FULLSCREEN_NONE) {
struct sway_container *focus = seat_get_focused_container(seat);
bool focused = focus == cont || container_has_ancestor(focus, cont);
if (on_titlebar && !focused) {
node = seat_get_focus_inactive(seat, &cont->node);
seat_set_focus(seat, node);
}
// If moving a container by it's title bar, use a threshold for the drag
if (!mod_pressed && config->tiling_drag_threshold > 0) {
seatop_begin_move_tiling_threshold(seat, cont);
} else {
seatop_begin_move_tiling(seat, cont);
}
return;
}
// Handle mousedown on a container surface
if (surface && cont && state == WLR_BUTTON_PRESSED) {
seat_set_focus_container(seat, cont);
seatop_begin_down(seat, cont, time_msec, sx, sy);
seat_pointer_notify_button(seat, time_msec, button, WLR_BUTTON_PRESSED);
return;
}
// Handle clicking a container surface or decorations
if (cont && state == WLR_BUTTON_PRESSED) {
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
node = seat_get_focus_inactive(seat, &cont->node);
seat_set_focus(seat, node);
seat_pointer_notify_button(seat, time_msec, button, state);
return;
}
#if HAVE_XWAYLAND
// Handle clicking on xwayland unmanaged view
if (surface && wlr_surface_is_xwayland_surface(surface)) {
struct wlr_xwayland_surface *xsurface =
wlr_xwayland_surface_from_wlr_surface(surface);
if (xsurface->override_redirect &&
wlr_xwayland_or_surface_wants_focus(xsurface)) {
struct wlr_xwayland *xwayland = server.xwayland.wlr_xwayland;
wlr_xwayland_set_seat(xwayland, seat->wlr_seat);
seat_set_focus_surface(seat, xsurface->surface, false);
seat_pointer_notify_button(seat, time_msec, button, state);
return;
}
}
#endif
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
seat_pointer_notify_button(seat, time_msec, button, state);
}
/*------------------------------------------\
* Functions used by handle_pointer_motion /
*----------------------------------------*/
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
static void check_focus_follows_mouse(struct sway_seat *seat,
struct seatop_default_event *e, struct sway_node *hovered_node) {
struct sway_node *focus = seat_get_focus(seat);
// This is the case if a layer-shell surface is hovered.
// If it's on another output, focus the active workspace there.
if (!hovered_node) {
struct wlr_output *wlr_output = wlr_output_layout_output_at(
root->output_layout, seat->cursor->cursor->x, seat->cursor->cursor->y);
if (wlr_output == NULL) {
return;
}
struct sway_output *hovered_output = wlr_output->data;
if (focus && hovered_output != node_get_output(focus)) {
struct sway_workspace *ws = output_get_active_workspace(hovered_output);
seat_set_focus(seat, &ws->node);
}
return;
}
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
// If a workspace node is hovered (eg. in the gap area), only set focus if
// the workspace is on a different output to the previous focus.
if (focus && hovered_node->type == N_WORKSPACE) {
struct sway_output *focused_output = node_get_output(focus);
struct sway_output *hovered_output = node_get_output(hovered_node);
if (hovered_output != focused_output) {
seat_set_focus(seat, seat_get_focus_inactive(seat, hovered_node));
}
return;
}
// This is where we handle the common case. We don't want to focus inactive
// tabs, hence the view_is_visible check.
if (node_is_view(hovered_node) &&
view_is_visible(hovered_node->sway_container->view)) {
// e->previous_node is the node which the cursor was over previously.
// If focus_follows_mouse is yes and the cursor got over the view due
// to, say, a workspace switch, we don't want to set the focus.
// But if focus_follows_mouse is "always", we do.
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
if (hovered_node != e->previous_node ||
config->focus_follows_mouse == FOLLOWS_ALWAYS) {
seat_set_focus(seat, hovered_node);
}
}
}
static void handle_pointer_motion(struct sway_seat *seat, uint32_t time_msec,
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
double dx, double dy) {
struct seatop_default_event *e = seat->seatop_data;
struct sway_cursor *cursor = seat->cursor;
struct wlr_surface *surface = NULL;
double sx, sy;
struct sway_node *node = node_at_coords(seat,
cursor->cursor->x, cursor->cursor->y, &surface, &sx, &sy);
if (config->focus_follows_mouse != FOLLOWS_NO) {
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
check_focus_follows_mouse(seat, e, node);
}
if (surface) {
if (seat_is_input_allowed(seat, surface)) {
wlr_seat_pointer_notify_enter(seat->wlr_seat, surface, sx, sy);
wlr_seat_pointer_notify_motion(seat->wlr_seat, time_msec, sx, sy);
}
} else {
cursor_update_image(cursor, node);
wlr_seat_pointer_notify_clear_focus(seat->wlr_seat);
}
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
struct sway_drag_icon *drag_icon;
wl_list_for_each(drag_icon, &root->drag_icons, link) {
if (drag_icon->seat == seat) {
drag_icon_update_position(drag_icon);
}
}
e->previous_node = node;
}
static void handle_tablet_tool_motion(struct sway_seat *seat,
struct sway_tablet_tool *tool, uint32_t time_msec, double dx, double dy) {
struct seatop_default_event *e = seat->seatop_data;
struct sway_cursor *cursor = seat->cursor;
struct wlr_surface *surface = NULL;
double sx, sy;
struct sway_node *node = node_at_coords(seat,
cursor->cursor->x, cursor->cursor->y, &surface, &sx, &sy);
if (config->focus_follows_mouse != FOLLOWS_NO) {
check_focus_follows_mouse(seat, e, node);
}
if (surface) {
if (seat_is_input_allowed(seat, surface)) {
wlr_tablet_v2_tablet_tool_notify_proximity_in(tool->tablet_v2_tool,
tool->tablet->tablet_v2, surface);
wlr_tablet_v2_tablet_tool_notify_motion(tool->tablet_v2_tool, sx, sy);
}
} else {
cursor_update_image(cursor, node);
wlr_tablet_v2_tablet_tool_notify_proximity_out(tool->tablet_v2_tool);
}
struct sway_drag_icon *drag_icon;
wl_list_for_each(drag_icon, &root->drag_icons, link) {
if (drag_icon->seat == seat) {
drag_icon_update_position(drag_icon);
}
}
e->previous_node = node;
}
/*----------------------------------------\
* Functions used by handle_pointer_axis /
*--------------------------------------*/
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
static uint32_t wl_axis_to_button(struct wlr_event_pointer_axis *event) {
switch (event->orientation) {
case WLR_AXIS_ORIENTATION_VERTICAL:
return event->delta < 0 ? SWAY_SCROLL_UP : SWAY_SCROLL_DOWN;
case WLR_AXIS_ORIENTATION_HORIZONTAL:
return event->delta < 0 ? SWAY_SCROLL_LEFT : SWAY_SCROLL_RIGHT;
default:
sway_log(SWAY_DEBUG, "Unknown axis orientation");
return 0;
}
}
static void handle_pointer_axis(struct sway_seat *seat,
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
struct wlr_event_pointer_axis *event) {
struct sway_input_device *input_device =
event->device ? event->device->data : NULL;
struct input_config *ic =
input_device ? input_device_get_config(input_device) : NULL;
struct sway_cursor *cursor = seat->cursor;
struct seatop_default_event *e = seat->seatop_data;
// Determine what's under the cursor
struct wlr_surface *surface = NULL;
double sx, sy;
struct sway_node *node = node_at_coords(seat,
cursor->cursor->x, cursor->cursor->y, &surface, &sx, &sy);
struct sway_container *cont = node && node->type == N_CONTAINER ?
node->sway_container : NULL;
enum wlr_edges edge = cont ? find_edge(cont, surface, cursor) : WLR_EDGE_NONE;
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
bool on_border = edge != WLR_EDGE_NONE;
bool on_titlebar = cont && !on_border && !surface;
bool on_titlebar_border = cont && on_border &&
cursor->cursor->y < cont->content_y;
bool on_contents = cont && !on_border && surface;
bool on_workspace = node && node->type == N_WORKSPACE;
float scroll_factor =
(ic == NULL || ic->scroll_factor == FLT_MIN) ? 1.0f : ic->scroll_factor;
bool handled = false;
// Gather information needed for mouse bindings
struct wlr_keyboard *keyboard = wlr_seat_get_keyboard(seat->wlr_seat);
uint32_t modifiers = keyboard ? wlr_keyboard_get_modifiers(keyboard) : 0;
struct wlr_input_device *device =
input_device ? input_device->wlr_device : NULL;
char *dev_id = device ? input_device_get_identifier(device) : strdup("*");
uint32_t button = wl_axis_to_button(event);
// Handle mouse bindings - x11 mouse buttons 4-7 - press event
struct sway_binding *binding = NULL;
state_add_button(e, button);
binding = get_active_mouse_binding(e, config->current_mode->mouse_bindings,
modifiers, false, on_titlebar, on_border, on_contents, on_workspace,
dev_id);
if (binding) {
seat_execute_command(seat, binding);
handled = true;
}
// Scrolling on a tabbed or stacked title bar (handled as press event)
if (!handled && (on_titlebar || on_titlebar_border)) {
enum sway_container_layout layout = container_parent_layout(cont);
if (layout == L_TABBED || layout == L_STACKED) {
struct sway_node *tabcontainer = node_get_parent(node);
struct sway_node *active =
seat_get_active_tiling_child(seat, tabcontainer);
list_t *siblings = container_get_siblings(cont);
int desired = list_find(siblings, active->sway_container) +
round(scroll_factor * event->delta_discrete);
if (desired < 0) {
desired = 0;
} else if (desired >= siblings->length) {
desired = siblings->length - 1;
}
struct sway_node *old_focus = seat_get_focus(seat);
struct sway_container *new_sibling_con = siblings->items[desired];
struct sway_node *new_sibling = &new_sibling_con->node;
struct sway_node *new_focus =
seat_get_focus_inactive(seat, new_sibling);
if (node_has_ancestor(old_focus, tabcontainer)) {
seat_set_focus(seat, new_focus);
} else {
// Scrolling when focus is not in the tabbed container at all
seat_set_raw_focus(seat, new_sibling);
seat_set_raw_focus(seat, new_focus);
seat_set_raw_focus(seat, old_focus);
}
handled = true;
}
}
// Handle mouse bindings - x11 mouse buttons 4-7 - release event
binding = get_active_mouse_binding(e, config->current_mode->mouse_bindings,
modifiers, true, on_titlebar, on_border, on_contents, on_workspace,
dev_id);
state_erase_button(e, button);
if (binding) {
seat_execute_command(seat, binding);
handled = true;
}
free(dev_id);
if (!handled) {
wlr_seat_pointer_notify_axis(cursor->seat->wlr_seat, event->time_msec,
event->orientation, scroll_factor * event->delta,
round(scroll_factor * event->delta_discrete), event->source);
}
}
/*----------------------------------\
* Functions used by handle_rebase /
*--------------------------------*/
static void handle_rebase(struct sway_seat *seat, uint32_t time_msec) {
struct seatop_default_event *e = seat->seatop_data;
struct sway_cursor *cursor = seat->cursor;
struct wlr_surface *surface = NULL;
double sx = 0.0, sy = 0.0;
e->previous_node = node_at_coords(seat,
cursor->cursor->x, cursor->cursor->y, &surface, &sx, &sy);
if (surface) {
if (seat_is_input_allowed(seat, surface)) {
wlr_seat_pointer_notify_enter(seat->wlr_seat, surface, sx, sy);
wlr_seat_pointer_notify_motion(seat->wlr_seat, time_msec, sx, sy);
}
} else {
cursor_update_image(cursor, e->previous_node);
wlr_seat_pointer_notify_clear_focus(seat->wlr_seat);
}
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
}
static const struct sway_seatop_impl seatop_impl = {
.button = handle_button,
.pointer_motion = handle_pointer_motion,
.pointer_axis = handle_pointer_axis,
.tablet_tool_tip = handle_tablet_tool_tip,
.tablet_tool_motion = handle_tablet_tool_motion,
Introduce default seatop This introduces a `default` seat operation which is used when no mouse buttons are being held. This means there is now always a seat operation in progress. It allows us to separate `default` code from the standard cursor management code. The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and `end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are only used by the default seatop. `end` is called when a seatop is being replaced by another one and allows the seatop to free any resources, though no seatop currently needs to do this. `finish` is no longer required, as each seatop can gracefully finish in their `button` callback. And `abort` is not needed, as calling `end` would achieve the same thing. The struct has also gained a bool named allow_set_cursor which allows the client to set a new cursor during `default` and `down` seatops. Seatops would previously store which button they were started with and stop when that button was released. This behaviour is changed so that it only ends once all buttons are released. So you can start a drag with $mod+left, then click and hold right, release left and it'll continue dragging while the right button is held. The motion callback now accepts dx and dy. Most seatops don't use this as they store the cursor position when the seatop is started and compare it with the current cursor position. This approach doesn't make sense for the default seatop though, hence why dx and dy are needed. The pressed_buttons array has been moved from the sway_cursor struct to the default seatop's data. This is only used for the default seatop to check bindings. The total pressed button count remains in the sway_cursor struct though, because all the other seatops check it to know if they should end. The `down` seatop no longer has a `moved` property. This was used to track if the cursor moved and to recheck focus_follows_mouse, but seems to work without it. The logic for focus_follows_mouse has been refactored. As part of this I've removed the call to wlr_seat_keyboard_has_grab as we don't appear to use keyboard grabs. The functions for handling relative motion, absolute motion and tool axis have been changed. Previously the handler functions were handle_cursor_motion, handle_cursor_motion_absolute and handle_tool_axis. The latter two both called cursor_motion_absolute. Both handle_cursor_motion and cursor_motion_absolute did very similar things. These are now simplified into three handlers and a single common function called cursor_motion. All three handlers call cursor_motion. As cursor_motion works with relative distances, the absolute and tool axis handlers convert them to relative first.
2019-03-16 18:47:39 +11:00
.rebase = handle_rebase,
.allow_set_cursor = true,
};
void seatop_begin_default(struct sway_seat *seat) {
seatop_end(seat);
struct seatop_default_event *e =
calloc(1, sizeof(struct seatop_default_event));
sway_assert(e, "Unable to allocate seatop_default_event");
seat->seatop_impl = &seatop_impl;
seat->seatop_data = e;
seatop_rebase(seat, 0);
}