Commit graph

186 commits

Author SHA1 Message Date
Simon Ser 38020d157d Bump RLIMIT_NOFILE
Wayland compositors handle many file descriptors: client
connections, DMA-BUFs, sync_files, wl_data_device pipes, and so
on. Bump the limit to the max.

Closes: https://github.com/swaywm/sway/issues/6285
2021-10-30 08:19:35 -06:00
Simon Ser 1bd8e3b469 Add support for DRM panel orientation
References: https://github.com/swaywm/wlroots/pull/3205
2021-09-28 21:27:15 +02:00
David Rosca 57d6f6f19e Add output modeline command
Only works with DRM backend.
2021-08-31 17:29:40 +02:00
Simon Ser 4cdc4ac63a Fallback to other output modes if preferred mode fails
Sometimes the preferred mode is not available due to hardware
constraints (e.g. GPU or cable bandwidth limitations). In these
cases it's better to fallback to lower modes than to end up with
a black screen.
2021-08-12 21:06:26 +02:00
Daniel Eklöf 3bf99198a6 sway: restore SIGPIPE handler before exec:ing swaybar
Sway ignores SIGPIPE (by installing a SIG_IGN handler), in order to
“prevent IPC from crashing Sway”.

SIG_IGN handlers are the *only* signal handlers inherited in
sub-processes. As such, we should be a good citizen and restore the
SIGPIPE handler to its default handler.

Original bug report:
https://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1806907.html
2021-06-05 11:50:11 +02:00
Daniel Otero b997147284 config: Fix swaybar pango_markup inconsistency
Until now, swaybar did not have pango markup enabled by default, even if
the sway config had it on. This patch aims to mimic the i3 behavior, but
maintaining the functionality of the "pango_markup" sway config command.
2021-06-03 14:18:23 +02:00
Tadeo Kondrak bb41b7b814 output: Reconfigure xcursor when applying output config
Before this commit, when an output had its scale dynamically changed,
Sway would not load a cursor theme with the new scale. This results
in stale cursor images when moving the cursor into an area controlled
by the compositor, like the background or resize areas.

To reproduce:
- Using IPC, set an output scale to a value that isn't currently used
- Move the cursor into a compositor-controlled area
- The cursor will not change
2021-02-24 20:54:48 +01:00
Ronan Pigott 915ba01ff1 config/output: correct refresh rate rounding error 2021-01-15 22:53:19 +01:00
Tamir Zahavi-Brunner 96578aa91e hide_cursor: Add an option to hide when typing
Add an option for the `hide_cursor` command to hide the cursor when
typing, i.e. whenever a key is pressed.
2020-10-30 09:59:54 +01:00
Tudor Brindus ed247c031c input/tablet: add tool_mode option to set tablet tools as relative input
Closes #4139.
2020-10-12 15:01:37 +02:00
Tarmack 989123a2a5 Add support for workspace_min_width bar option. 2020-10-11 19:12:42 +02:00
Simon Ser 5432f00adf config/output: don't change output state before commit
Previously, we called output_disable prior to wlr_output_commit. This
mutates Sway's output state before the output commit actually succeeds.
This results in Sway's state getting out-of-sync with wlroots'.

An alternative fix [1] was to revert the changes made by output_disable
in case of failure. This is a little complicated. Instead, this patch
makes it so Sway's internal state is never changed before a successful
wlr_output commit.

We had two output flags: enabled and configured. However enabled was set
prior to the output becoming enabled, and was used to prevent the output
event handlers (specifically, the mode handler) from calling
apply_output_config again (infinite loop).

Rename enabled to enabling and use it exclusively for this purpose.
Rename configure to enabled, because that's what it really means.

[1]: https://github.com/swaywm/sway/pull/5521

Closes: https://github.com/swaywm/sway/issues/5483
2020-07-10 18:18:27 -04:00
Tudor Brindus b3f08597cd input: disable events for map_to_output devices when output not present
Fixes #3449.
2020-06-19 10:02:22 +02:00
Thomas Hebb 84ec8f92a6 Use new wlroots API for clearing keyboard/pointer focus during grabs
We are not allowed to do what we did in #5222 and pass a `NULL` surface
wlr_seat_pointer_notify_enter(), and it's causing crashes when an
xdg-shell popup is active (see #5294 and swaywm/wlroots#2161).

Instead, solve #5220 using the new wlroots API introduced in
swaywm/wlroots#2217.
2020-06-05 17:24:23 +02:00
Tudor Brindus c3c9737e8b config/output: reconfigure input devices after full output init
Previously in 3de1a39, it "worked by accident" in my testing since the
display being used in `map_to_output` was initialized first (the map
would not be applied because the display hadn't actually come online
yet), and was followed by a second display (at which point the map would
get applied for the first display).

Refs #5231
2020-04-26 09:13:39 +02:00
Tudor Brindus 3de1a3958e config/output: reconfigure input devices on new output
Some input rules, like `map_to_output`, are dependent on a specific
screen being present. This currently does not work for hotplugged
outputs, or outputs that are processed after the input device is
initially probed.

This commit fixes both cases, by reconfiguring inputs on each output
addition.

Fixes #5231.
2020-04-24 18:51:22 +02:00
Simon Ser 34dccd4224 Don't add disabled outputs back to output layout
Return early from apply_output_config if the output is disabled.
This restores our previous behavior [1].

[1]: 0cdcf66bbc (diff-4f65f4327e987fef8ec3796cdb07644eL349)
2020-04-09 15:45:29 +02:00
Simon Ser 97a6524a5a Fix initial modeset
An if branch takes care of the case where the output needs to be turned
off (DPMS'ed or disabled). The other branch needs to unconditionally
enable the output.

output->current_mode is already taken care of in apply_config.

Sorry about that, probably made a bad change by mistake after my DRM testing.

Closes: https://github.com/swaywm/sway/issues/5193
2020-04-09 15:45:29 +02:00
Simon Ser 0cdcf66bbc Introduce test_output_config
This function checks whether the backend would accept an output
configuration, without applying the changes.
2020-04-08 16:36:40 +02:00
Michael Weiser 3ee5aace33 commands: Add shortcuts_inhibitor command
Add a command to influence keyboard shortcuts inhibitors. In its current
form it can be used to activate, deactivate or toggle an existing
inhibitor on the surface currently receiving input. This can be used to
define an escape shortcut such as:

bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate

It also allows the user to configure a per-seat default of whether
keyboard inhibitors are honoured by default (the default) or not. Using
the activate/toggle command they can then enable the lingering inhibitor
at a later time of their choosing.

As a side effect this allows to specifically address a named seat for
actions as well, whatever use-case that might serve.

Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11 23:51:37 -04:00
Simon Ser 5d692b0581 Add an adaptive_sync output command
This enables/disables adaptive synchronization on the output.

For now, the default is disabled because it might cause flickering on
some hardware if clients don't submit frames at regular enough
intervals. In the future an "auto" option will only enable adaptive sync
if a fullscreen client opts-in via a Wayland protocol.
2020-03-07 00:32:04 +01:00
Brian Ashworth 8b593677d2 output: fix updating output manager config
The output manager config is created when the output is created. It is
updated when the mode, transform, scale, or layout for the output
changes, as well as, when the output is destroyed.

Since the output->enabled property was not being set before calling
apply_output_config, the output event handlers were early returning and
never updating the output manager config when the output state was
committed.

This fixes the issue by setting output->enabled in apply_output_config
below the output disabling section. There are also a few other minor
changes that are required to function.

Additionally, this renames output_enable to output_configure to better
describe the recent changes.
2020-02-16 09:42:22 +01:00
Yorick van Pelt 447967ad3a Fix crash: use wlr_output->name instead of possibly missing oc->name
Fixes segfault on start:
https://gist.github.com/yorickvP/89eccb3782c6edb22aeda6ce9c6d4fcb
2020-02-13 13:05:17 +01:00
Simon Ser 47763c99f9 Apply the output scale filter after the output commit
The smart output filter uses the current output scale.
2020-02-11 20:52:02 -05:00
Simon Ser f5fa0c7124 Stop calling apply_output_config from output_enable
The only output_enable caller is now apply_output_config. Stop calling
apply_output_config from output_enable to simplify the code and avoid
the back-and-forth between these two functions.

output_enable is now the symmetric of output_disable: it just marks the
output as enabled and performs bookkeeping (e.g. creating teh default
workspace). It is called from apply_output_config after the output
commit, so that it can read the current output state and act
accordingly.

This change also allows us to avoid an extraneous wlr_output_commit.

References: https://github.com/swaywm/sway/issues/4921
2020-02-11 20:52:02 -05:00
Simon Ser 555b0d4087 Fix output scale auto-detection
Closes: https://github.com/swaywm/sway/issues/4960
2020-02-11 20:52:02 -05:00
Brian Ashworth 9d827ef493 output: apply oc to outputs using wl_for_each_safe
If applying an output config to an output fails, the output may be
destroyed. To be able to handle this situation correctly,
apply_output_config_to_outputs needs to use wl_list_for_each_safe.
2020-01-16 19:55:24 -07:00
Paul Riou 2b5e75032b Fix sway_log using non initialised output_config pointer
This fixes a crash where the `oc->name` would be accessed by sway_log()
even when `oc` was NULL.
2019-12-31 15:56:32 +01:00
Simon Ser ef2332f7a6 Re-add support for wlr_output's atomic API
This reverts commit 724926ea6a and
re-applies commit 6e0565e9de.

Outputs now need to be explicitly enabled when performing a modeset.
We need to roll back wlr_output_attach_render when we decide not to
render.

See also: https://github.com/swaywm/wlroots/pull/1797 (wlroots PR)
See also: https://github.com/swaywm/sway/pull/4355 (Original sway PR)
See also: https://github.com/swaywm/sway/pull/4434 (Revert sway PR)
2019-12-30 11:24:11 -07:00
Ronan Pigott bd42415b5d config/output: apply scale_filter even when scale has not changed 2019-12-27 11:38:05 +01:00
Brian Ashworth 218b5b9dc0 config/input: set type for new identifier configs
When an input becomes available, the input type config for that device
type will be merged underneath the input identifier config, provided
they both exist. If an input type config gets added or modified at a
later point, then those changes get merged onto the input identifier
configs for that type. However there was a missing case of the input
identifier config being added after the device is already available and
the input type config existing. This makes it so that the first time an
input identifier config gets stored, there will be a check to see if it
matched any of the available devices. If it does, then there will be a
search for the associated input type config, which will be merged
underneath the input identifier config if found.
2019-12-14 09:31:42 -05:00
Simon Ser 2f84d6e349 Auto-detect output scale
If the screen DPI is high enough, auto-enable scale=2 (if the user
hasn't set the scale).

Uses heuristics based on [1].

[1]: 0521706617/src/backends/meta-monitor.c (L1590)

Closes: https://github.com/swaywm/sway/issues/1800
2019-12-12 19:00:24 -05:00
Drew DeVault 2f3c6cccf5 Add seat <seat> idle_{inhibit,wake} <sources...>
This adds seat configuration options which can be used to configure what
events affect the idle behavior of sway.

An example use-case is mobile devices: you would remove touch from the
list of idle_wake events. This allows the phone to stay on while you're
actively using it, but doesn't wake from idle on touch events while it's
sleeping in your pocket.
2019-12-12 10:37:30 -05:00
Ronan Pigott 6968fb3123 add scale_filter output config option 2019-11-29 18:13:37 +01:00
Brian Ashworth 5d882cb5fc Add support for wlr_keyboard_group
A wlr_keyboard_group allows for multiple keyboard devices to be
combined into one logical keyboard. This is useful for keyboards that
are split into multiple input devices despite appearing as one physical
keyboard in the user's mind.

This adds support for wlr_keyboard_groups to sway. There are two
keyboard groupings currently supported, which can be set on a per-seat
basis. The first keyboard grouping is none, which disables all grouping
and provides no functional change. The second is keymap, which groups
the keyboard devices in the seat by their keymap. With this grouping,
the effective layout and repeat info is also synced across keyboard
devices in the seat. Device specific bindings will still be executed as
normal, but everything else related to key and modifier events will be
handled by the keyboard group's keyboard.
2019-11-21 10:42:10 -05:00
Ivan Molodetskikh 022df2542b output: add max_render_time 2019-11-17 20:18:42 +01:00
Tadeo Kondrak 7f54495b5e Use an enum instead of a marker string for map_to_ 2019-11-17 13:34:24 +01:00
Tadeo Kondrak 4829f1c26a Implement input map_to_region command 2019-11-17 13:34:24 +01:00
Simon Ser f576bcdb8c Use wlr_output_preferred_mode instead of the last mode
Instead of relying on the order of modes, use wlr_output_preferred_mode
to get the preferred mode.
2019-11-05 14:00:23 -05:00
Simon Ser 01b5350bdc Fix segfault in set_mode
best is NULL prior to being assigned to a mode.

Closes: https://github.com/swaywm/sway/issues/4705
Fixes: f33dcd4c60 ("Prefer higher refresh rate default modes")
2019-11-05 13:35:56 -05:00
Ronan Pigott f33dcd4c60 Prefer higher refresh rate default modes 2019-11-05 10:34:44 +01:00
Simon Ser 38b37247ff Add --custom to output mode command
This forces to set the mode as a custom mode.
2019-11-04 19:40:47 -05:00
Sheena Artrip 7efb5d4673 Rename symbol set_cloexec to sway_set_cloexec, remove duplicates.
set_cloexec is defined by both sway and wlroots (and who-knows-else),
so rename the sway one for supporting static linkage. We also remove
the duplicate version of this in client/.

Fixes: https://github.com/swaywm/sway/issues/4677
2019-11-01 12:41:08 -04:00
lbonn 30fa7d191e Fix potential NULL reference on cleanup
If allocation of bindings failed.

Found with clang-tidy
2019-11-01 12:18:09 -04:00
Simon Ser ec14a00e8c Fix segfault in wlr_output_manager_v1_set_configuration
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.

When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.

Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.

Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27 10:51:02 -04:00
Simon Ser 58a40ce07b Fix apply_output_config return value when enabling output
apply_output_config would call output_enable and always return true,
even if the output couldn't be enabled.
2019-10-27 10:51:02 -04:00
Danilo Spinella a5b6f40937 Fix refresh rate scale of output
When applying config, value mode->refresh is mHz; convert it to Hz before
assigning it to the temporary output config. oc->refresh_rate will
be converted back to mHz in set_mode function.

Fix debug log printing GHz instead of Hz.
2019-10-21 14:22:20 +02:00
Brian Ashworth 1fd2c6ba49 swaybar: complete barconfig_update event handling
This adds complete support for the barconfig_update ipc event. This also
changes the bar command and subcommand handlers to correctly emit the
event. This makes it so all bar subcommands other than id and
swaybar_command are dynamically changeable at runtime. sway-bar.5 has
been updated accordingly
2019-09-04 16:48:50 -10:00
Rouven Czerwinski 724926ea6a Revert "Add support for wlr_output's atomic API"
This reverts commit 6e0565e9de.

This is required for the revert on swaywm/wlroots#1781
2019-08-07 16:25:37 +09:00
Brian Ashworth 19d05d3ae0 config/output: rebase cursors after config applied
When applying an output config, an output may transform or be altered
in some way that effects the cursor. In order for the cursor images to
be updated properly, all cursors need to be rebased after applying
output configs.
2019-08-07 13:50:07 +09:00