02b412a introduced the use of list for sdbus deps, however
it was assuming that all packages which were in a list has a version
higher than 239. That is true for libsystemd and libelogind, since they
use the same versions, however basu is using version numbers which are
way lower than what libsystemd/libelogind are using, so basu only build
is failing.
(cherry picked from commit dbaf2e4fdb327f05f792b69430fe6f893fc9d879)
`popup_unconstrain` uses view coordinates to init the output box for
popups. However wlroots expects the box to be set in a toplevel surface
coordinate system, which is not always equal to view. The difference
between those is a window geometry set via xdg-shell.
GTK4 reserves some space for client-side decoration and thus has a
window with top left corner not matching to (0, 0) of a surface. The box
calculated without taking that into account was slightly shifted
compared to the actual output and allowed to position part of the popup
off screen.
(cherry picked from commit aa443629b58e1d3d10cf64e689b661c076808d66)
SUID privilege drop is needed for the "builtin"-backend of libseat,
which copied our old "direct" backend behavior for the sake of
compatibility and ease of transition.
libseat now has a better alternative in the form of seatd-launch. It
uses the normal seatd daemon and libseat backend and takes care of SUID
for us.
Add a soft deprecation warning to highlight our future intent of
removing this code. The deprecation cycle is needed to avoid surprises
when sway no longer drops privileges.
(cherry picked from commit e1db1f8218998c428e8b087dda6660449ef2891a)
Future meson releases will change the default and warns when the
implicit default is used, breaking builds.
Explicitly set check: false to maintain behavior and silence warnings.
(cherry picked from commit 470e04e8da6e078da77190998b5e0c34e244839a)
Followup on 4e4898e90f.
If a view quickly maps and unmaps repeatedly, there will be multiple
destroyed containers with same view in a single transaction. Each of
these containers will then try to destroy this view, resulting in use
after free.
The container should only destroy the view if the view still belongs
to the container.
Simple reproducer: couple XMapWindow + XUnmapWindow in a loop followed
by XDestroyWindow.
See #6605
(cherry picked from commit f92329701b0983ec41fec29d3abc5c751cbe4a28)
We currently track the focus of a seat in two ways: we use a list called
focus_stack to track the order in which nodes have been focused, with
the first node representing what's currently focused, and we use a
variable called has_focus to indicate whether anything has focus--i.e.
whether we should actually treat that first node as focused at any given
time.
In a number of places, we treat has_focus as implying that a focused
node exists. If it's true, we attempt to dereference the return value of
seat_get_focus(), our helper function for getting the first node in
focus_list, with no further checks. But this isn't quite correct with
the current implementation of seat_get_focus(): not only does it return
NULL when has_focus is false, it also returns NULL when focus_stack
contains no items.
In most cases, focus_stack never becomes empty and so this doesn't
matter at all. Since focus_stack stores a history of focused nodes, we
rarely remove nodes from it. The exception to this is when a node itself
goes away. In that case, we call seat_node_destroy() to remove it from
focus_stack and free it. But we don't unset has_focus if we've removed
the final node! This lets us get into a state where has_focus is true
but seat_get_focus() returns NULL, leading to a segfault when we try to
dereference it.
Fix the issue both by updating has_focus in seat_node_destroy() and by
adding an assertion in seat_get_focus() that ensures focus_stack and
has_focus are in sync, which will make it easier to track down similar
issues in the future.
Fixes#6395.
[1] There's some discussion in #1585 from when this was implemented
about whether has_focus is actually necessary; it's possible we could
remove it entirely, but for the moment this is the architecture we have.
(cherry picked from commit 921b0a863382b70234aeb4bd589c10328e9ff042)
cairo_image_surface_create can fail, e.g. when running out of
memory or when the size is too big. Avoid crashing in this case.
Closes: https://github.com/swaywm/sway/issues/6531
(cherry picked from commit 59aebaa5f9f3afe9cdfbb0d37c4dc631690da3b9)
If getline fails once, it was not reset before the next getline
call. errno is only overwritten by getline on error.
(cherry picked from commit 414950bbc8e833362a689cc11720855e8edd1323)
Now output_begin_destroy emits the node::destroy event similar to
workspace_begin_destroy. It currently has no listeners, since they
listen to output::disable or wlr_output::destroy instead.
We use the headless backend to create a special fallback output
used when no other output is connected. However this messes up the
"real" headless output names users have come to expect (e.g.
currently the first headless output will be named "HEADLESS-2"
instead of "HEADLESS-1").
Fix this by setting the output name with [1].
[1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3395
Make the status command a process group leader and change the kill(2)
calls to target the new process group. Signals sent by swaybar will then
be received by both the status command and its children, if any. While
here, check the result of fork(2).
Without this, children spawned by the status command may not receive the
signals sent by swaybar. As a result, these children may be orphaned on
reload.
The issue could be shown by setting the bar to
bar {
status_command i3status | tee /tmp/i3status.out
}
which would leave orphaned processes for each reload of sway
$ ps o pid,ppid,cmd | grep i3status | grep -v grep
43633 43624 sh -c i3status | tee /tmp/i3status.out
43634 43633 i3status
43635 43633 tee /tmp/i3status.out
$ swaymsg reload
$ ps o pid,ppid,cmd | grep i3status | grep -v grep
43634 1 i3status
43635 1 tee /tmp/i3status.out
43801 43788 sh -c i3status | tee /tmp/i3status.out
43802 43801 i3status
43803 43801 tee /tmp/i3status.out
This fixes#5584.
sway-bar(5) says:
> For compatibility with i3, bar mode <mode> [<bar-id>] syntax is
> supported along with the sway only bar <bar-id> mode <mode> syntax.
while the actual behavior is that `bar_cmd_mode` ignores already
selected `config->current_bar` and applies the change to all the
configured bars.
This makes it possible to hint to the renderer and backends how many
bits per channel the buffers that the compositor draws windows onto
should have. Renderers and backends may deviate from this if they
do not support the formats with higher bit depth.
Proprietary drivers require --unsupported-gpu to be allowed, and IPCs
require no option to be passed.
The only way to satisfy both is to run IPCs before checking for
proprietary drivers.
Wayland compositors handle many file descriptors: client
connections, DMA-BUFs, sync_files, wl_data_device pipes, and so
on. Bump the limit to the max.
Closes: https://github.com/swaywm/sway/issues/6285
Add a subcommand for `smart_gaps` that enables outer gaps only
on workspaces with exactly one visible child.
Also add documentation for `smart_gaps toggle`.
previously, fullscreen global containers would grab cursor input
even if a shell-layer surface was on top of it
related issue: https://github.com/swaywm/sway/issues/6501
If the focused container is floating by itself, create a new container
in tiling mode as a sibling of the inactive focused container instead of
creating it as a sibling of everything that is in tiling mode in that
workspace. This is the i3 behavior.
seat_get_focus_inactive_floating and seat_get_focus_inactive_tiling do
not always return a view, so get the previously focused view from the
container with seat_get_focus_inactive_view. This is the i3 behavior.
If the destroyed xwayland view is in transaction, it won't
be destroyed immediately. wlr_xwayland_surface then becomes
dangling pointer.
Closes#6605Closes#5884
Nvidia has historically been a bad actor in the open-source graphics
ecosystem because they required a special EGLStreams code-path
instead of exposing the de-facto standard GBM API. However, with
their upcoming release they now support GBM as well.
This is a push in the right direction for Nvidia, so there's no
reason we should be more hostile to them than to any other proprietary
driver. Let's remove the --my-next-gpu-wont-be-nvidia flag, and advise
users to use --unsupported-gpu now.
Note, proprietary Nvidia drivers are still unsupported by the Sway
project (just like all other proprietary drivers).
