Commit 37d7bc6998 ("transaction: Only wait for ack from visible
views") introduced a check which uses view_is_visible() to check if a view
is still visible on the screen. However view_is_visible() will early
return in case the node is in the destroying state. This is incorrect
for transactions, since a destroying view which is visible will trigger
configure events for other clients. This bug was visible when repeatedly
opening and closing two views side by side, since we ignore the
destroying node we get a frame where the still open view is shown with
the old configure values and the rest is the desktop background. The
next frame is than correct again.
Fix this by considering destroying views as visible, we correctly wait
for them and send the configure events to other views in time, fixing
the background flicker.
Fixes#6473
(cherry picked from commit e4909ab4a3514d9b3bfb01473cd3cd1704c8cd05)
`popup_unconstrain` uses view coordinates to init the output box for
popups. However wlroots expects the box to be set in a toplevel surface
coordinate system, which is not always equal to view. The difference
between those is a window geometry set via xdg-shell.
GTK4 reserves some space for client-side decoration and thus has a
window with top left corner not matching to (0, 0) of a surface. The box
calculated without taking that into account was slightly shifted
compared to the actual output and allowed to position part of the popup
off screen.
(cherry picked from commit aa443629b58e1d3d10cf64e689b661c076808d66)
SUID privilege drop is needed for the "builtin"-backend of libseat,
which copied our old "direct" backend behavior for the sake of
compatibility and ease of transition.
libseat now has a better alternative in the form of seatd-launch. It
uses the normal seatd daemon and libseat backend and takes care of SUID
for us.
Add a soft deprecation warning to highlight our future intent of
removing this code. The deprecation cycle is needed to avoid surprises
when sway no longer drops privileges.
(cherry picked from commit e1db1f8218998c428e8b087dda6660449ef2891a)
Followup on 4e4898e90f.
If a view quickly maps and unmaps repeatedly, there will be multiple
destroyed containers with same view in a single transaction. Each of
these containers will then try to destroy this view, resulting in use
after free.
The container should only destroy the view if the view still belongs
to the container.
Simple reproducer: couple XMapWindow + XUnmapWindow in a loop followed
by XDestroyWindow.
See #6605
(cherry picked from commit f92329701b0983ec41fec29d3abc5c751cbe4a28)
We currently track the focus of a seat in two ways: we use a list called
focus_stack to track the order in which nodes have been focused, with
the first node representing what's currently focused, and we use a
variable called has_focus to indicate whether anything has focus--i.e.
whether we should actually treat that first node as focused at any given
time.
In a number of places, we treat has_focus as implying that a focused
node exists. If it's true, we attempt to dereference the return value of
seat_get_focus(), our helper function for getting the first node in
focus_list, with no further checks. But this isn't quite correct with
the current implementation of seat_get_focus(): not only does it return
NULL when has_focus is false, it also returns NULL when focus_stack
contains no items.
In most cases, focus_stack never becomes empty and so this doesn't
matter at all. Since focus_stack stores a history of focused nodes, we
rarely remove nodes from it. The exception to this is when a node itself
goes away. In that case, we call seat_node_destroy() to remove it from
focus_stack and free it. But we don't unset has_focus if we've removed
the final node! This lets us get into a state where has_focus is true
but seat_get_focus() returns NULL, leading to a segfault when we try to
dereference it.
Fix the issue both by updating has_focus in seat_node_destroy() and by
adding an assertion in seat_get_focus() that ensures focus_stack and
has_focus are in sync, which will make it easier to track down similar
issues in the future.
Fixes#6395.
[1] There's some discussion in #1585 from when this was implemented
about whether has_focus is actually necessary; it's possible we could
remove it entirely, but for the moment this is the architecture we have.
(cherry picked from commit 921b0a863382b70234aeb4bd589c10328e9ff042)
cairo_image_surface_create can fail, e.g. when running out of
memory or when the size is too big. Avoid crashing in this case.
Closes: https://github.com/swaywm/sway/issues/6531
(cherry picked from commit 59aebaa5f9f3afe9cdfbb0d37c4dc631690da3b9)
Now output_begin_destroy emits the node::destroy event similar to
workspace_begin_destroy. It currently has no listeners, since they
listen to output::disable or wlr_output::destroy instead.
We use the headless backend to create a special fallback output
used when no other output is connected. However this messes up the
"real" headless output names users have come to expect (e.g.
currently the first headless output will be named "HEADLESS-2"
instead of "HEADLESS-1").
Fix this by setting the output name with [1].
[1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3395
sway-bar(5) says:
> For compatibility with i3, bar mode <mode> [<bar-id>] syntax is
> supported along with the sway only bar <bar-id> mode <mode> syntax.
while the actual behavior is that `bar_cmd_mode` ignores already
selected `config->current_bar` and applies the change to all the
configured bars.
This makes it possible to hint to the renderer and backends how many
bits per channel the buffers that the compositor draws windows onto
should have. Renderers and backends may deviate from this if they
do not support the formats with higher bit depth.
Proprietary drivers require --unsupported-gpu to be allowed, and IPCs
require no option to be passed.
The only way to satisfy both is to run IPCs before checking for
proprietary drivers.
Wayland compositors handle many file descriptors: client
connections, DMA-BUFs, sync_files, wl_data_device pipes, and so
on. Bump the limit to the max.
Closes: https://github.com/swaywm/sway/issues/6285
Add a subcommand for `smart_gaps` that enables outer gaps only
on workspaces with exactly one visible child.
Also add documentation for `smart_gaps toggle`.
previously, fullscreen global containers would grab cursor input
even if a shell-layer surface was on top of it
related issue: https://github.com/swaywm/sway/issues/6501
If the focused container is floating by itself, create a new container
in tiling mode as a sibling of the inactive focused container instead of
creating it as a sibling of everything that is in tiling mode in that
workspace. This is the i3 behavior.
seat_get_focus_inactive_floating and seat_get_focus_inactive_tiling do
not always return a view, so get the previously focused view from the
container with seat_get_focus_inactive_view. This is the i3 behavior.
If the destroyed xwayland view is in transaction, it won't
be destroyed immediately. wlr_xwayland_surface then becomes
dangling pointer.
Closes#6605Closes#5884
Nvidia has historically been a bad actor in the open-source graphics
ecosystem because they required a special EGLStreams code-path
instead of exposing the de-facto standard GBM API. However, with
their upcoming release they now support GBM as well.
This is a push in the right direction for Nvidia, so there's no
reason we should be more hostile to them than to any other proprietary
driver. Let's remove the --my-next-gpu-wont-be-nvidia flag, and advise
users to use --unsupported-gpu now.
Note, proprietary Nvidia drivers are still unsupported by the Sway
project (just like all other proprietary drivers).
Adds detection code to handle pci-*-platform-* strings
in ID_PATH
References: https://github.com/swaywm/sway/issues/6590
Signed-off-by: Jari Ronkainen <ronchaine@gmail.com>
Commit 152a559e replaced the view pointer in the inhibitor struct with a
pointer to the wlr_inhibitor for application inhibitors. But this was not
changed in the sway_idle_inhibit_v1_application_inhibitor_for_view function.
This caused a bug in the sway tree view where the application inhibitor is
always "none".
Clang 13 reports:
../sway/commands.c:470:23: error: variable 'context' set but not used
[-Werror,-Wunused-but-set-variable]
enum command_context context = 0;
^
Last use of was removed in commit 1d3681f521.
Downstream PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=258813
This commit makes sure the extents are kept up-to-date, fixes not
damaging the surface if its layer shell-specific state didn't change,
and adds a check if the layer shell-specific state didn't change but the
surface got mapped/unmapped, which could affect keyboard focus.
Prior to 62d90a8e, titlebar's font height (and other related values)
would change any time any titlebar's content changed, so these values
were recalculated each time any titlebar's content changed (or a new
titlebar was created).
However, since the above was merge, these values no longer change so
often and we only need to recalculate them when the configured font
changes (and stop calling `config_update_font_height` each time
titlebars are rendered).
This commit removes all the unecessary calls to this function and avoids
all those unecessary calculations. Whenever the font strays from the
default value, the `font` command is called, and it calls
`config_update_font_height`, which is enough to keep the value always up
to date.
I've also added a default value to the `font_baseline` config, since
otherwise that's zero for setups that don't explicitly specify a font.
This prevents sway from extending the desktop to i.e. VR headsets, and makes
them available for DRM leasing.
Non-desktop wlr_outputs will be offered through the wlr_drm_lease_v1_manager
interface for client to lease.
If the surface the pointer started to interact with is destroyed we also
want the seatop_down to end. In case a drag is initiated we receive a
call to handle_end.
This solves an issue where layer-shell items would not receive a button
release event when the pointer left them while being pressed. The
default seatop changes focus immediately while seatop_down defers any
focus changes until the pointer is released or seatop_down is destroyed.
The title itself and marks were being rendered by two very-similar yet
different functions, and any changes made to one had to be reflected on
the other.
This mostly prevents such oversights from happening, and keeps makes
sure we keep both consistent.
Use fixed titlebar heights. The default height is calculated based on
font metrics for the configured font and current locale.
Some testing with titles with emoji and CJK characters (which are
substantially higher in my setup) shows that the titlebars retain their
initial value, text does shift up or down, and all titlebars always
remain aligned.
Also drop some also now-unecessary title_height calculations.
Makes also needed to be updated, since they should be positioned with
the same rules.
Sometimes the preferred mode is not available due to hardware
constraints (e.g. GPU or cable bandwidth limitations). In these
cases it's better to fallback to lower modes than to end up with
a black screen.
When a layer surface shrinks we need to damage the area it previously
occupied, but we don't know the location of all its subsurfaces in the
previous state, so instead damage a rectangle that encloses the entire
previous extent.
The xdg-decoration protocol allows clients to request whether they want
to use server side decorations or client side decorations. Currently,
sway ignores this and always enforces whatever the server is currently
set to. Although tiled clients cannot be allowed to set borders, there
is no harm in listening requests from floating clients. Sidenote: also
fix an unrelated style error.
Losing the precision resulted in wlr_cursor and wlr_seat::pointer_state
getting out of sync during pointer motion in seatop_down.
Since the difference was always under 1 px, it was practically
impossible to notice in normal use.
But because of being out of sync, cursor_rebase would always end up
incorrectly calling wlr_seat_pointer_notify_motion from
seatop_default_begin (on releasing mouse button) which broke cursor
locking.
See #5405Closes#4632
When emulating touch, the simulating_pointer_from_touch field is
set to true. It's switched back to false when a touch_up event is
received. However we need to ensure we always send a wl_pointer.frame
event following a group of other wl_pointer events.
Since a touch_frame event is always guaranteed to come after a group
of touch events, unset simulating_pointer_from_touch in the touch_frame
handler instead of the touch_up handler. Add a new field to know whether
the touch_frame handler should stop emulation.
If HOME environment variable is not set, sway fails startup with a
segmentation fault due to null pointer dereference.
Also check calloc return value and only perform the fallback code when
really needed.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Add a subcommand for `gaps` that allows to toggle gaps at
runtime. This functionality is part of i3-gaps since [1]
but is missing in sway.
[1] https://github.com/Airblader/i3/pull/264
When setting the geometry from content for floating windows, the
coordinates for borders are normally taken into account. However in the
case of a floating fullscreen window, we should not be doing this. Since
the content of the container takes the space of the entire output, this
causes the calculated borders to neccesarily be outside of the output.
This later causes a problem when sending surface entrance events since
in a multi-monitor setup, the border coordinates will overlap with
another output despite the surface not actually being on that output at
all. The fix is to just ignore border coordinates for a floating
fullscreen container since fullscreen, of course, does not actually have
any borders. Fixes#6080.
get_current_time_msec is only used in cursor.c, so we can move it in and
make it static. This is primarily intended to avoid a symbol collision
with wlroots, which we unfortunately do not have a good solution for
yet.
