Commit graph

307 commits

Author SHA1 Message Date
Andri Yngvason ab8ded626b desktop: output: Scale custom output refresh rate
This fixes an issue with wlr-output-management causing the frame rate to
jump to 60000 Hz when setting a custom mode.
2020-07-18 18:21:51 +02:00
Simon Ser 5432f00adf config/output: don't change output state before commit
Previously, we called output_disable prior to wlr_output_commit. This
mutates Sway's output state before the output commit actually succeeds.
This results in Sway's state getting out-of-sync with wlroots'.

An alternative fix [1] was to revert the changes made by output_disable
in case of failure. This is a little complicated. Instead, this patch
makes it so Sway's internal state is never changed before a successful
wlr_output commit.

We had two output flags: enabled and configured. However enabled was set
prior to the output becoming enabled, and was used to prevent the output
event handlers (specifically, the mode handler) from calling
apply_output_config again (infinite loop).

Rename enabled to enabling and use it exclusively for this purpose.
Rename configure to enabled, because that's what it really means.

[1]: https://github.com/swaywm/sway/pull/5521

Closes: https://github.com/swaywm/sway/issues/5483
2020-07-10 18:18:27 -04:00
Isaac Freund 76adcc3fd3 output: simplify loop over layer surfaces 2020-06-30 16:19:00 +02:00
Kenny Levinsen 5a4a7bc0da container: Remove useless surface dimensions
The adjustments to resize logic left them unnecessary.
2020-06-03 16:41:17 +02:00
Kenny Levinsen fcd0ab8f33 view: Save all buffers associated with view
During the execution of a resize transaction, the buffer associated
with a view's surface is saved and reused until the client acknowledges
the resulting configure event.

However, only one the main buffer of the main surface was stored and
rendered, meaning that subsurfaces disappear during resize.

Iterate over all, store and render buffers from all surfaces in the view
to ensure that correct rendering is preserved.
2020-06-03 16:41:17 +02:00
David96 8c62278207 Render layer shell popups over the top layer 2020-04-10 10:45:47 +02:00
Rouven Czerwinski ac0637708f output: remove damage listeners in damage destroy
Instead of removing the destroy listeners in the output destroy, remove
them in the damage destroy handler. Fixes the following use after free:

  ==646625==ERROR: AddressSanitizer: heap-use-after-free on address 0x61200017cab8 at pc 0x0000004f8f29 bp 0x7ffdf465ad30 sp 0x7ffdf465ad20
  WRITE of size 8 at 0x61200017cab8 thread T0

      #0 0x4f8f28 in wl_list_remove ../common/list.c:181
      #1 0x43dd24 in handle_destroy ../sway/desktop/output.c:790
  (`wl_list_remove(&output->damage_destroy.link);` here, 214e3030e1dce master branch)
      #2 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29
      #3 0x7f0e57390954 in wlr_output_destroy ../types/wlr_output.c:365
      #4 0x7f0e5735e37f in backend_destroy ../backend/x11/backend.c:128
      #5 0x7f0e57348147 in wlr_backend_destroy ../backend/backend.c:47
      #6 0x7f0e57356f75 in multi_backend_destroy ../backend/multi/backend.c:54
      #7 0x7f0e5735710e in handle_display_destroy ../backend/multi/backend.c:107
      #8 0x7f0e573f23e4 in wl_display_destroy (/lib64/libwayland-server.so.0+0x93e4)
      #9 0x42f0b2 in server_fini ../sway/server.c:177
      #10 0x42dd01 in main ../sway/main.c:414
      #11 0x7f0e570f7041 in __libc_start_main (/lib64/libc.so.6+0x27041)
      #12 0x40e3bd in _start (/opt/wayland/bin/sway+0x40e3bd)

  0x61200017cab8 is located 120 bytes inside of 320-byte region [0x61200017ca40,0x61200017cb80)
  freed by thread T0 here:
      #0 0x7f0e57aa9357 in __interceptor_free (/lib64/libasan.so.6+0xb0357)
      #1 0x7f0e5738b877 in wlr_output_damage_destroy ../types/wlr_output_damage.c:143
      #2 0x7f0e5738b2b9 in output_handle_destroy ../types/wlr_output_damage.c:13
      #3 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29
      #4 0x7f0e57390954 in wlr_output_destroy ../types/wlr_output.c:365
      #5 0x7f0e5735e37f in backend_destroy ../backend/x11/backend.c:128
      #6 0x7f0e57348147 in wlr_backend_destroy ../backend/backend.c:47
      #7 0x7f0e57356f75 in multi_backend_destroy ../backend/multi/backend.c:54
      #8 0x7f0e5735710e in handle_display_destroy ../backend/multi/backend.c:107
      #9 0x7f0e573f23e4 in wl_display_destroy (/lib64/libwayland-server.so.0+0x93e4)

  previously allocated by thread T0 here:
      #0 0x7f0e57aa9887 in __interceptor_calloc (/lib64/libasan.so.6+0xb0887)
      #1 0x7f0e5738b532 in wlr_output_damage_create ../types/wlr_output_damage.c:91
      #2 0x43e4a7 in handle_new_output ../sway/desktop/output.c:875
      #3 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29
      #4 0x7f0e57357261 in new_output_reemit ../backend/multi/backend.c:143
      #5 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29
      #6 0x7f0e5736030a in wlr_x11_output_create ../backend/x11/output.c:253
      #7 0x7f0e5735e309 in backend_start ../backend/x11/backend.c:113
      #8 0x7f0e573480fb in wlr_backend_start ../backend/backend.c:36
      #9 0x7f0e57356e61 in multi_backend_start ../backend/multi/backend.c:31
      #10 0x7f0e573480fb in wlr_backend_start ../backend/backend.c:36
      #11 0x42f4ba in server_start ../sway/server.c:205
      #12 0x42dbd7 in main ../sway/main.c:394
      #13 0x7f0e570f7041 in __libc_start_main (/lib64/libc.so.6+0x27041)

Fixes #5158
2020-04-10 10:20:21 +02:00
Simon Ser f03d50f54b Add test-only support to wlr-output-management-unstable-v1
Use the new test_output_config function to implement
wlr-output-management-unstable-v1's test request.
2020-04-08 16:36:40 +02:00
Simon Ser 40e87fa98a Stop checking wlr_output_attach_buffer return value
Update for [1]. Everything is now checked at commit-time.

[1]: https://github.com/swaywm/wlroots/pull/2097
2020-04-08 16:36:40 +02:00
Tadeo Kondrak 91c0ffd6cf Null check sway_layer_surface when checking damage
Before this change, an overlay layer-shell surface without a buffer
attached would segfault the compositor on screen damage.
2020-03-10 10:59:05 +01:00
Simon Ser 9d0aa0cb83 Use wlr_client_buffer
Update for breaking changes in [1].

[1]: https://github.com/swaywm/wlroots/pull/2043
2020-03-06 23:57:43 +01:00
Simon Ser 241684eb1d Drop sway_output.surface_needs_frame
wlr_output_schedule_frame now sets output->needs_frame [1], so this
isn't needed anymore.

[1]: https://github.com/swaywm/wlroots/pull/2053
2020-03-06 21:37:53 +01:00
Simon Ser f5ba8006c9 Only schedule a frame if client has requested a frame callback
When a client hasn't damaged its surface, we only need to schedule an
output frame if the client has requested a frame callback.
2020-03-06 21:37:53 +01:00
Simon Ser c0811fcf87 Make handle_destroy and output_repaint_timer_handler static 2020-03-04 03:09:43 +01:00
Simon Ser 5ed01c861a Add support for wlr-output-power-management-unstable-v1 2020-02-26 16:26:13 +01:00
Simon Ser 5e90080468 Call apply_output_config instead of output_enable
apply_output_config will call output_enable if necessary.

This fixes a lone wlr_output_enable call (without a matching
wlr_output_commit call) which was a no-op.
2020-02-11 20:52:02 -05:00
Brian Ashworth 18507e62fd desktop/output: fix mem leak in handle_new_output
This fixes a memory leak of oc (the output config) in handle_new_output.
Output configs returned from find_output_config are not stored and need
to be freed after use.
2020-01-16 18:14:49 -07:00
Simon Ser ef2332f7a6 Re-add support for wlr_output's atomic API
This reverts commit 724926ea6a and
re-applies commit 6e0565e9de.

Outputs now need to be explicitly enabled when performing a modeset.
We need to roll back wlr_output_attach_render when we decide not to
render.

See also: https://github.com/swaywm/wlroots/pull/1797 (wlroots PR)
See also: https://github.com/swaywm/sway/pull/4355 (Original sway PR)
See also: https://github.com/swaywm/sway/pull/4434 (Revert sway PR)
2019-12-30 11:24:11 -07:00
Kenny Levinsen 275af2ad62 output: Restore previous max_render_time behavior 2019-12-01 12:44:07 +01:00
Kenny Levinsen d1eab10266 output: Schedule idle frames if we do not render
Repaint scheduling delays output render and frame done events from
output frame events, and block idle frame events from being scheduled in
between output frame done and output render in this period of time.

If a surface is committed after its frame done event, but before output
render, idle frame requests will be blocked, and the surface relies on
the upcoming render to schedule a frame.

If when the repaint timer expires, output render is deemed unnecessary,
no frame will be scheduled. This can lead to surfaces never having their
frame callbacks fire.

To fix this, we store that a surface has requested a frame in
surface_needs_frame. When the repaint expires, if no render is deemed
necessary, we check this flag and schedule an idle frame.

Fixes #4768
2019-12-01 12:44:07 +01:00
Kenny Levinsen 57f615e122 output: Replace block_idle_frame with frame_pending 2019-12-01 12:44:07 +01:00
Kenny Levinsen 4b57953628 output: Ensure that frame_done is delayed on max_render_time
max_render_time can be set on output, view, or both. However, if only
applied to the output, send_frame_done_iterator would erroneously send
frame_done immediately, ignoring the output max_render_time. As
damage_handle_frame processed max_render_time correctly, idle frames
would be blocked in anticipation of the delay that was meant to happen.

Without the delay, frame events would be dispatched during the idle
frame block, and some clients would never receive the frame done events
they had requested, at least not until something else actively drove
another render.

Respecting both view and output max_render_time in
send_frame_done_iterator ensures that the frame events are always
correctly delayed.

Fixes #4756
2019-11-28 23:40:36 +01:00
Jason 939c7b2d52 Amend typos 2019-11-23 11:48:31 +01:00
Simon Ser 1d3cbe9f27 Use new presentation-time helper
This has the advantage to (1) reduce boilerplate and (2) make us
correctly handle wlr_output_event_present.commit_seq.
2019-11-21 11:19:00 -05:00
Ivan Molodetskikh 76210c141d output: check wlr_output in repaint handler
It's possible for the output to be disconnected in just the right moment
for wlr_output to be NULL in the repaint handler, causing a crash. This
check fixes that crash.
2019-11-17 20:18:42 +01:00
Ivan Molodetskikh bd9a53f1a3 view: add max_render_time 2019-11-17 20:18:42 +01:00
Ivan Molodetskikh 022df2542b output: add max_render_time 2019-11-17 20:18:42 +01:00
Simon Ser 1a253ca7ab Fix presentation feedback when scanning out fullscreen view
Closes: https://github.com/swaywm/sway/issues/4663
2019-10-27 11:07:48 -04:00
Simon Ser ec14a00e8c Fix segfault in wlr_output_manager_v1_set_configuration
Calling wlr_output_manager_v1_set_configuration with an enabled output
and a NULL mode is incorrect if the output doesn't support modes.

When DPMS'ing an output, wlr_output_enable(output, false) is called.
This de-allocates the CRTC and sets wlr_output.current_mode to NULL.

Because we mark DPMS'ed outputs as enabled, we also need to provide a
correct output mode. Add a field to sway_output to hold the current
mode.

Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27 10:51:02 -04:00
Danilo Spinella a5b6f40937 Fix refresh rate scale of output
When applying config, value mode->refresh is mHz; convert it to Hz before
assigning it to the temporary output config. oc->refresh_rate will
be converted back to mHz in set_mode function.

Fix debug log printing GHz instead of Hz.
2019-10-21 14:22:20 +02:00
Drew DeVault d19f4f7bf8 Updates per wlroots layer shell changes 2019-10-16 10:24:15 -04:00
Simon Ser 00c4c7e8cc Fix direct scan-out flickering
Sometimes when using direct scan-out, some flickering between the
fullscreen app and the regular desktop could be seen.

This happened because we called wlr_output_attach_render and then
wlr_output_attach_buffer for direct scan-out. wlr_output_attach_render
makes the OpenGL context current but also attaches the OpenGL buffer to
the primary plane apparently (all of this happens inside
eglMakeCurrent).

This patch moves the scan-out logic outside of output_render, before
wlr_output_attach_render. This lines it up with rootston's
implementation. This also makes more sense since no rendering is
involved when using direct scan-out.

Sorry about that, I should've tested this with more clients. The new
code has been tested with mpv and a GLFW demo.
2019-09-26 10:36:18 -04:00
Ilia Bozhinov 06c36f8435 properly check pixman_region32_contains_rectangle return
pixman_region32_contains_rectangle() returns
pixman_region_intersection_t not a bool.
2019-08-19 12:28:40 +03:00
Drew DeVault cb8f68d74b layer-shell: add support for popups 2019-08-14 22:10:05 +03:00
Simon Ser f984f21b6a Remove all wayland-server.h includes
The documentation for wayland-server.h says:

> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.

Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.

This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h
includes").
2019-07-27 17:16:56 -04:00
Josef Gajdusek ac87df23ea Update output manager on layout change
The output manager config was not properly updated if the position
of the output got changed.
2019-07-17 19:36:15 +03:00
murray b59139c239 use surface coordinates for damaging buffers 2019-06-22 12:16:32 +03:00
Rouven Czerwinski 5ff330e6bc desktop: output: fix use-after-free in destroy
handle_destroy would mark the output es being destroyed and commit the
transaction. Committing the transaction results in the output being
freed, the output manager can not retrieve the server reference
afterwards, resulting in the following use-after-free:

==22746==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000017088 at pc 0x560c1ac17136 bp 0x7ffeab146f20 sp 0x7ffeab146f10
READ of size 8 at 0x614000017088 thread T0
    #0 0x560c1ac17135 in handle_destroy ../sway/desktop/output.c:566
    #1 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #2 0x7f38af5d3dfc in drm_connector_cleanup ../subprojects/wlroots/backend/drm/drm.c:1448
    #3 0x7f38af5d2058 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1240
    #4 0x7f38af5c6a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
    #5 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #6 0x7f38af5e827a in udev_event ../subprojects/wlroots/backend/session/session.c:52
    #7 0x7f38aef5d7f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)
    #8 0x7f38aef5c39b in wl_display_run (/usr/lib/libwayland-server.so.0+0x939b)
    #9 0x560c1ac0afbe in server_run ../sway/server.c:225
    #10 0x560c1ac09382 in main ../sway/main.c:397
    #11 0x7f38aed35ce2 in __libc_start_main (/usr/lib/libc.so.6+0x23ce2)
    #12 0x560c1abea10d in _start (/usr/local/bin/sway+0x3910d)

0x614000017088 is located 72 bytes inside of 432-byte region [0x614000017040,0x6140000171f0)
freed by thread T0 here:
    #0 0x7f38af82df89 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:66
    #1 0x560c1acbd1ed in output_destroy ../sway/tree/output.c:243
    #2 0x560c1ac23ce5 in transaction_destroy ../sway/desktop/transaction.c:66
    #3 0x560c1ac26b71 in transaction_progress_queue ../sway/desktop/transaction.c:348
    #4 0x560c1ac284ca in transaction_commit_dirty ../sway/desktop/transaction.c:539
    #5 0x560c1ac17110 in handle_destroy ../sway/desktop/output.c:564
    #6 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #7 0x7f38af5d3dfc in drm_connector_cleanup ../subprojects/wlroots/backend/drm/drm.c:1448
    #8 0x7f38af5d2058 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1240
    #9 0x7f38af5c6a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
    #10 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #11 0x7f38af5e827a in udev_event ../subprojects/wlroots/backend/session/session.c:52
    #12 0x7f38aef5d7f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)

previously allocated by thread T0 here:
    #0 0x7f38af82e5a1 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:95
    #1 0x560c1acbc228 in output_create ../sway/tree/output.c:91
    #2 0x560c1ac17ba2 in handle_new_output ../sway/desktop/output.c:656
    #3 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #4 0x7f38af5e4ce8 in new_output_reemit ../subprojects/wlroots/backend/multi/backend.c:143
    #5 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #6 0x7f38af5d26d4 in scan_drm_connectors ../subprojects/wlroots/backend/drm/drm.c:1294
    #7 0x7f38af5c6a59 in drm_invalidated ../subprojects/wlroots/backend/drm/backend.c:135
    #8 0x7f38af69330e in wlr_signal_emit_safe ../subprojects/wlroots/util/signal.c:29
    #9 0x7f38af5e827a in udev_event ../subprojects/wlroots/backend/session/session.c:52
    #10 0x7f38aef5d7f1 in wl_event_loop_dispatch (/usr/lib/libwayland-server.so.0+0xa7f1)

SUMMARY: AddressSanitizer: heap-use-after-free ../sway/desktop/output.c:566 in handle_destroy
Shadow bytes around the buggy address:
  0x0c287fffadc0: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
  0x0c287fffadd0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c287fffade0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c287fffadf0: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c287fffae00: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
=>0x0c287fffae10: fd[fd]fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c287fffae20: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd fd
  0x0c287fffae30: fd fd fd fd fd fd fd fd fd fd fd fd fd fd fa fa
  0x0c287fffae40: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
  0x0c287fffae50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x0c287fffae60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Retrieve the reference before the output is destroyed and update the
output_management state with the saved reference.
2019-06-02 19:36:16 +03:00
Josef Gajdusek 0e582f1a51 Update output manager config on all output events
The output manager config was not properly updated when output
configuration was changed through some other means (such as a command).
2019-05-24 22:52:07 +03:00
Josef Gajdusek b3a5effef2 Implement wlr-output-management-v1 2019-05-24 18:59:14 +03:00
Moelf ed2e553b8d Implement output toggle
discussed in #4136, this can't handle wildcard but won't crash.
2019-05-14 00:11:04 -04:00
Simon Ser b6e55064fe Update for wlroots#1660 2019-04-23 14:37:44 -06:00
Brian Ashworth 69a1a0ff99 Fix scratchpad fullscreen behavior and crash
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.

This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
  into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
  scratchpad, it will be fullscreen when shown (and fullscreen disabled
  when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
  scratchpad, it will be shown immediately as fullscreen global. The
  container is not moved to a workspace and remains in the
  scratchpad. The container will be visible until fullscreen disabled
  or killed. Since the container is in the scratchpad, running
  `scratchpad show` or `move container to scratchpad` will have no
  effect

This also changes `container_replace` to transfer fullscreen and
scratchpad status.
2019-04-13 08:48:37 -06:00
Brian Ashworth 75e7bd24cc swaybg: one instance for all outputs
This makes it so there will only be one swaybg instance running
instead of one per output. swaybg's cli has been changed to a xrandr
like interface, where you select an output and then change properties
for that output and then select another output and repeat. This also
makes it so swaybg is only killed and respawned when a background
changes or when reloading.
2019-04-04 20:08:21 +03:00
Brian Ashworth 3106ef23a7 Fix output config retrieval for new outputs
This removes `output_find_config`, which would take the first matching
output config it found. This is fine if only a name output config,
identifier output config, or even just wildcard exist, but if there is
a name output config and identifier output config, they are not merged.
Instead, this introduces find_output_config, which is just a wrapper
for `get_output_config`. This ensures that both the name and identifier
output configs are respected.

This fixes the following case:
- For simplicity in this example, remove all output configs from config
- Run `swaymsg output <name> bg #ff0000 solid_color`
- Run `swaymsg output <identifier> scale 2`
- Disconnect and reconnect output

Without this, the output will have the background, but not the scale.
With this, the output will have both the background and scale
2019-03-16 10:40:46 -06:00
emersion 076257a978 Stop using wlr_output->{lx,ly}
Also fixes sway_output->{lx,ly,width,height} not being updated. Also fixes
output_get_in_direction adding buffer coords to layout coords.
2019-03-11 12:43:01 -04:00
Brian Ashworth c02d2a0128 damage: remove output_damage_view
This removes `output_damage_view` since it is unnecessary. The logic
has been moved into its only caller `output_damage_from_view`. When
damaging the whole view, `output_damage_whole_container` should be used
instead
2019-03-10 01:23:03 +01:00
Brian Ashworth 7580718d12 output_damage_whole_container: damage subsurfaces
This adds an iterative call in `output_damage_whole_container` to
damage the subsurfaces for all visible views that are inside of the
container. This is needed to damage subsurfaces that extend outside the
box of the container. Without this, those subsurfaces will create
artifacts when moving or resizing.
2019-03-10 01:20:36 +01:00
Brian Ashworth d3d7956576 Handle NULL from output_get_active_workspace
This modifies the places where output_get_active_workspace is called to
handle a NULL result. Some places already handled it and did not need a
change, some just have guard off code blocks, others return errors, and
some have sway_asserts since the case should never happen. A lot of this
is probably just safety precautions since they probably will never be
called when `output_get_active_workspace` is not fully configured with a
workspace.
2019-02-21 21:18:03 +01:00
Brian Ashworth 03dfdb1edb output_get_active_workspace: check workspaces length
If an output's node was dirty and the transaction was committed before a
workspace was moved to or created for the output, the instruction would
have a bad value for `state->active_workspace` due to a missing
length check in `output_get_active_workspace`. If there was no focus on
the output, the first workspace was being returned. If the workspace
list was currently empty, the value was either garbage, or in the case of
an output being disabled and re-enabled, a workspace that may have been
previously freed. This just adds the length check to avoid returning out
of bounds value.
2019-02-21 08:06:35 -05:00