Pending state is currently inlined directly in the container struct,
while the current state is in a state struct. A side-effect of this is
that it is not immediately obvious that pending double-buffered state is
accessed, nor is it obvious what state is double-buffered.
Instead, use the state struct for both current and pending.
When gaps are resized for lack of space the calculation could result in
a gap size of non-integer pixels. This would result in containers
located at non-integer pixels which would be subtly broken.
Because the layout code rounds down the dimensions of the windows
resizing would often be off by one pixel. The width/height fraction
would not exactly reflect the final computed width and so the resize
code would end up calculating things wrong.
To fix this first snap the container size fractions to the pixel grid
and only then do the resize. Also use round() instead of floor() during
layout to avoid a slightly too small width. This applies in two cases:
1. For the container we are actually resizing using floor() might result
in being 1px too small.
2. For the other containers it might result in resizing them down by 1px
and then if the container being resized is the last all those extra
pixels would make the resize too large.
Fixes#4391
When arranging the workspace, prev_x and prev_y should be ignoring the
current gaps otherwise the workspace diff_x and diff_y location deltas
will be off. When the deltas are off, each arrangement of the workspace
would incorrectly move floaters an extra -workspace->current_gaps.left
along the x-axis and an extra -workspace->current_gaps.top along the
y-axis.
Instead of tracking gaps per child apply gaps in two logical places:
1. In tiled containers use the layout code to add the gaps between
windows. This is much simpler and guarantees that the sizing of children
is correct.
2. In the workspace itself apply all the gaps around the edge. Here
we're in the correct position to size inner and outer gaps correctly and
decide on smart gaps in a single location.
Fixes#4296
Instead of using container->width/height as both the input and output
of the layout calculation have container->width_fraction/height_fraction
as the share of the parent this container occupies and calculate the
layout based on that. That way the container arrangement can always be
recalculated even if width/height have been altered by things like
fullscreen.
To do this several parts are reworked:
- The vertical and horizontal arrangement code is ajusted to work with
fractions instead of directly with width/height
- The resize code is then changed to manipulate the fractions when
working on tiled containers.
- Finally the places that manipulated width/height are adjusted to
match. The adjusted parts are container split, swap, and the input
seat code.
It's possible that some parts of the code are now adjusting width and
height only for those to be immediately recalculated. That's harmless
and since non-tiled containers are still sized with width/height
directly it may avoid breaking other corner cases.
Fixes#3547Fixes#4297
If there is more than one new window layout correctly by calculating the
default size of the new windows using the information of how many of
them there are in total.
This helps with issue #3547 but doesn't fix it in all situations. Things
now work correctly if the first layout of new windows happens after
leaving fullscreen. But if for some reason an arrange_container() gets
called while we are fullscreen the windows will still be incorrectly
sized after saved_width/saved_height get used to restore the first
window's size before going fullscreen.
This changes `apply_tabbed_layout` and `apply_stacked_layout` to use
`int` instead of `size_t`. This is necessary for tabbed and stacked
containers to be positioned correctly when the y-location is negative.
The reasoning for this is signed plus unsigned is always an unsigned
value. This was causing the y-location of the container to be
positioned near `INT_MIN` due to an unsigned integer underflow
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.
wlr_log_init is still invoked in sway/main.c
This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
When locked, there is no active workspace so it must find the
focus_inactive workspace instead.
Additionally, this adds a check for if a view maps while there are no
outputs connected and handles it gracefully.
If you have swaybar docked to the top, and you create a floating sticky
container and switch workspaces on the same output, the sticky container
would move down by the height of swaybar on each switch.
This happens because when creating the workspace we set the dimensions
to the same as the output, then the subsequent arrange corrects it.
During this arrange, floating containers are translated so they stay
relative to the workspace. This translation needs to not occur for the
initial arrange.
This patch makes workspaces have a zero width and height when first
created, so we can detect whether this is the initial arrange and avoid
translating the floating containers if so.
Prior to f5b9815128, children of tabbed
and stacked containers would have their container size and position set
to the same as the tabbed/stacked container. Normally this would be a
problem for a layout such as T[V[view]], but there was some code in the
arrange functions which would check if the grandparent of the view was a
tabbed or stacked container and would offset the view's Y accordingly.
Commit f5b9815128 changed the box to
exclude the titlebar for all tabbed/stacked children so that the
grandparent check could be removed. But this meant the title was not
covered in the container and wasn't damaged when the child changed its
title.
This patch changes it so that a child of a tabbed/stacked container will
have its box include the title bar if the child is a view, but not if
it's a layout container. This fixes the title damage issue while
avoiding the grandparent check in the arrange functions, and matches
what we see visually.
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.
In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.
If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.
There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.
In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.
The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.
The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.
Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.
Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.
In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.
container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.
`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.
container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.
There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.
The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
This commit changes the arrange code in a way that will support type
safe arguments.
The arrange_output et al functions are now public, however I opted not
to use them directly yet. I've kept the generic arrange_windows there
for convenience until type safety is fully implemented. This means this
patch has much less risk of breaking things as it would otherwise.
To be type safe, arrange_children_of cannot exist in its previous form
because the thing passed to it could be either a workspace or a
container. So it's now renamed to arrange_children and accepts a list_t,
as well as the parent layout and parent's box.
There was some code which checked the grandparent's layout to see if it
was tabbed or stacked and adjusted the Y offset of the grandchild
accordingly. Accessing the grandparent layout isn't easy when using type
safe arguments, and it seemed odd to even need to do this. I determined
that this was needed because a child of a tabbed container would have a
swayc Y matching the top of the tab bar. I've changed this so a child of
a tabbed container will have a swayc Y matching the bottom of the tab
bar, which means we don't need to access the grandparent layout. Some
tweaks to the rendering and autoconfigure code have been made to
implement this, and the container_at code appears to work without
needing any changes.
arrange_children_of (now arrange_children) would check if the parent had
gaps and would copy them to the child, effectively making the
workspace's gaps recurse into all children. We can't do this any more
without passing has_gaps, gaps_inner and gaps_outer as arguments to
arrange_children, so I've changed the add_gaps function to retrieve it
from the workspace directly.
apply_tabbed_or_stacked_layout has been split into two functions, as it
had different logic depending on the layout.
Lastly, arrange.h had an unnecessary include of transaction.h. I've
removed it, which means I've had to add it to several other files.
When we have type safety we'll need to have functions for
workspace_add_tiling and so on. This means the existing container
functions will be just for containers, so they are being moved to
container.c. At this point layout.c doesn't contain much else, so I've
relocated everything and removed the file.
* container_swap and its static functions have been moved to the swap
command and made static.
* container_recursive_resize has been moved to the resize command and
made static.
* The following have been moved to container.c:
* container_handle_fullscreen_reparent
* container_insert_child
* container_add_sibling
* container_add_child
* container_remove_child
* container_replace_child
* container_split
* enum movement_direction and sway_dir_to_wlr have been moved to util.c.
Side note: Several commands included layout.h which then included
root.h. With layout.h gone, root.h has to be included by those commands.
When a workspace is moved to another output, or the output it's on
changes its global layout position, the floating containers on that
workspace should be translated by the same amount as the workspace. This
keeps the floating containers in the same position relative to the
workspace.
A check is done to make sure the floating container's center point isn't
being moved off screen. If it is, it is centered within the workspace.
Fixes part of #2500.
Workspaces previously had a magical `workspace->floating` container,
which had a layout of L_FLOATING and whose children were actual floating
views. This allowed some conveniences, but was a hacky solution because
the container has to be exempt from focus, coordinate transactions with
the workspace, and omit emitting IPC events (which we didn't do).
This commit changes it to be a list directly in the sway_workspace. The
L_FLOATING layout is no longer used so this has been removed as well.
* Fixes incorrect check in the swap command (it checked if the
containers had the L_FLOATING layout, but this layout applied to the
magical container).
* Introduces workspace_add_floating
This creates a root.c and moves bits and pieces from elsewhere into it.
* layout_init has been renamed to root_create and moved into root.c
* root_destroy has been created and is called on shutdown
* scratchpad code has been moved into root.c, because hidden scratchpad
containers are stored in the root struct
This PR changes the way we handle transactions to a more simple method.
The new method is to mark containers as dirty from low level code
(eg. arranging, or container_destroy, and eventually seat_set_focus),
then call transaction_commit_dirty which picks up those containers and
runs them through a transaction. The old methods of using transactions
(arrange_and_commit, or creating one manually) are now no longer
possible.
The highest-level code (execute_command and view implementation
handlers) will call transaction_commit_dirty, so most other code just
needs to set containers as dirty. This is done by arranging, but can
also be done by calling container_set_dirty.
* The arrange_foo functions are now replaced with arrange_and_commit, or
with manually created transactions and arrange_windows x2.
* The arrange functions are now only called from the highest level
functions rather than from both high level and low level functions.
* Due to the previous point, view_set_fullscreen_raw and
view_set_fullscreen are both merged into one function again.
* Floating and fullscreen are now working with transactions.
This allows the title's texture to always be the full width of the text,
and clipped at render time according to the desired width (eg. tabs...).
As an added bonus, the texture no longer needs to be updated when
containers are arranged.
Implements rendering of borders. Title text is still to do.
Implements the following configuration directives:
* client.focused
* client.focused_inactive
* client.unfocused
* client.urgent
* border
* default_border
Replaces arrange_windows() with arrange_root(), arrange_output(),
arrange_workspace() and arrange_children_of().
Also makes fullscreen views save and restore their dimensions, which
allows it to preserve any custom resize and is also a requirement for
floating views once they are implemented.
