Commit graph

63 commits

Author SHA1 Message Date
Ronan Pigott 1f469e1692 focus: do nothing on focus prev|next for workspaces 2019-11-04 23:48:39 +01:00
lbonn cf95de9cae focus: add a NULL check in focus <direction>
container is checked for NULL in other conditions earlier, it's not
obvious that it can't be undefined here.
2019-11-01 12:18:09 -04:00
Ronan Pigott f5f12a69f6 focus: support focus prev|next [sibling] 2019-10-27 11:02:57 -04:00
lbonn 3ee3a9ef60 focus: support focus_wrapping workspace
Following i3 support: https://github.com/i3/i3/pull/3407
2019-10-17 13:48:52 +03:00
Brian Ashworth 69a1a0ff99 Fix scratchpad fullscreen behavior and crash
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.

This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
  into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
  scratchpad, it will be fullscreen when shown (and fullscreen disabled
  when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
  scratchpad, it will be shown immediately as fullscreen global. The
  container is not moved to a workspace and remains in the
  scratchpad. The container will be visible until fullscreen disabled
  or killed. Since the container is in the scratchpad, running
  `scratchpad show` or `move container to scratchpad` will have no
  effect

This also changes `container_replace` to transfer fullscreen and
scratchpad status.
2019-04-13 08:48:37 -06:00
Brian Ashworth bd4c3957ba cmd_focus: raise floating for <criteria> focus
Floaters are currently raised for `focus <direction>`. This extends the
same functionality to `<criteria> focus`.
2019-04-11 09:19:45 -06:00
Ryan Dwyer cdcc2a5bb5 Support focus <direction> for floating containers
This kind of worked before in that focus would change, but it wasn't
intentionally supported and had side effects such as not raising
the container, and being unable to cycle through all floaters depending
on the direction used.

This commit makes it properly supported. The new focus is chosen based
on the distance to the center point of each floating container in the
workspace, and the container is raised.

In a multi output setup, if both visible workspaces have floating
containers, focus will NOT cross into the other output. It is assumed
the user will use a workspace binding in this case.

If two floating containers occupy the exact same center point and you
try to focus in a direction, the behaviour is undefined.
2019-03-20 08:55:28 -06:00
Brian Ashworth 3330faded5 Handle seat_get_focused_workspace returning NULL
This modifiers the callers of seat_get_focused_workspace to handle
getting NULL as the return value, if they did not already.
2019-03-12 19:14:04 +01:00
Brian Ashworth d3d7956576 Handle NULL from output_get_active_workspace
This modifies the places where output_get_active_workspace is called to
handle a NULL result. Some places already handled it and did not need a
change, some just have guard off code blocks, others return errors, and
some have sway_asserts since the case should never happen. A lot of this
is probably just safety precautions since they probably will never be
called when `output_get_active_workspace` is not fully configured with a
workspace.
2019-02-21 21:18:03 +01:00
Ryan Dwyer 6b8bf10941 Introduce container_is_scratchpad_hidden
Just a convenience function that improves readability of the code.

Other things worth noting:

* container_get_siblings and container_sibling_index no longer use the
const keyword
* container_handle_fullscreen_reparent is only ever called after
attaching the container to a workspace, so its con->workspace check has
been changed to an assertion
2019-01-28 10:35:40 +01:00
Ryan Dwyer 20aa8ee67d Implement fullscreen global 2019-01-25 08:29:21 +10:00
M Stoeckl 0af5b26e41 Fix dead stores found by scan-build
In addition to removing unused code, two minor problems are fixed:
 (1) `resize set` and `resize adjust` did not error when given
too many arguments.
 (2) `orientation` was incorrectly overridden to be 'U' for
scroll events in the swaybar tray `handle_click` function.
2019-01-22 10:12:04 -05:00
M Stoeckl 1211a81aad Replace wlr_log with sway_log
This commit mostly duplicates the wlr_log functions, although
with a sway_* prefix. (This is very similar to PR #2009.)
However, the logging function no longer needs to be replaceable,
so sway_log_init's second argument is used to set the exit
callback for sway_abort.

wlr_log_init is still invoked in sway/main.c

This commit makes it easier to remove the wlroots dependency for
the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-21 12:59:42 +01:00
M Stoeckl 2a684cad5f Remove now-unused "input" argument of cmd_results_new
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))`
applied to `cmd_results_new`.

String usage constants have been converted from pointers to arrays when
encountered. General handler format strings were sometimes modified to
include the old input string, especially for unknown command errors.
2019-01-14 08:05:29 -05:00
Brian Ashworth 88d96bc41f Combine output_by_name and output_by_identifier
This combines `output_by_name` and `output_by_identifier` into a single
function called `output_by_name_or_id`. This allows for output
identifiers to be used in all commands, simplifies the logic of the
callers, and is more efficient since worst case is a single pass through
the output list.
2018-12-20 19:55:29 +01:00
Brian Ashworth 2942bbbc60 cmd_focus: show scratchpad if hidden
If a scratchpad container is hidden, it is still focusable using
criteria and should be shown. This fixes a segfault when attempting to
rebase the cursor since previously the scratchpad container would not be
on any output.
2018-12-03 08:49:26 +01:00
Brian Ashworth c8c1ecaf25 Fix focus_wrapping yes
It appears that the focus code that handles `focus_wrapping yes` was
removed during the conversion to type safety. This re-implements the
focus code for when `focus_wrapping` is set to `yes` (default). Neither
the `no` or `force` options appear to be effected and should be working.
2018-11-05 12:39:44 -05:00
Ryan Dwyer bf19f63a79 Wrap to fartherest output when running focus output
Also moves the `opposite_direction` function into `util.c` as it's used
in two places now.
2018-11-01 08:29:45 +10:00
Ryan Dwyer 7be309710d Remove enum movement_direction
There's no point having both movement_direction and wlr_direction. This
replaces the former with the latter.

As movement_direction also contained MOVE_PARENT and MOVE_CHILD items,
these are now checked specifically in the focus command and handled in
separate functions, just like the other focus variants.
2018-10-30 23:27:49 +10:00
Drew DeVault 51ad2676d0
Merge pull request #2975 from RyanDwyer/deny-commands-when-no-outputs
Deny several commands when there's no outputs connected
2018-10-25 17:10:36 +02:00
Ryan Dwyer 885963f11f Deny several commands when there's no outputs connected 2018-10-26 00:03:44 +10:00
Ryan Dwyer 60a1d79de7 Rebase the cursor after applying transactions
This approaches cursor rebasing from a different angle. Rather than
littering the codebase with cursor_rebase calls and using transaction
callbacks, this just runs cursor_rebase after applying every transaction
- but only if there's outputs connected, because otherwise it causes a
crash during shutdown.

There is one known case where we still need to call cursor_rebase
directly, and that's when running `seat seat0 cursor move ...`. This
command doesn't set anything as dirty so no transaction occurs.
2018-10-25 23:37:40 +10:00
Ryan Dwyer 3c7fd145d5 Rebase the cursor after focusing in a direction
Prior to this patch, creating a tabbed container with two views,
switching tab and then scrolling without motion would cause the scroll
events to be sent to the old focus. To fix this, rebasing the cursor is
needed after changing focus.
2018-10-24 18:43:32 +10:00
Ryan Dwyer 9ea71f292b Introduce cursor_rebase
This function "rebases" the cursor on top of whatever is underneath it,
without triggering any focus changes.
2018-10-19 22:47:54 +10:00
Ryan Dwyer a2fdac2c4b Consider cursor warp when switching workspaces
Fixes a regression introduced in
24a90e5d86.

consider_warp_to_focus has been renamed to seat_consider_warp_to_focus,
moved to seat.c and made public. It is now called when switching
workspaces via `workspace <ws>`.
2018-10-19 08:00:13 +10:00
Ryan Dwyer 24a90e5d86 Remove cursor warping from seat_set_focus
Because cursor warping was the default behaviour in seat_set_focus,
there may be cases where we may have been warping the cursor
unintentionally. This patch removes cursor warping from seat_set_focus
and only does it in the focus command. This is managed by a static
function in focus.c.

To know whether to warp or not, we need to know which node had focus
previously. To keep track of this easily, seat->prev_focus has been
introduced and is set to the previous in seat_set_focus.
2018-10-18 23:08:45 +10:00
Ryan Dwyer f6e218a643 Rename seat_get_active_child to seat_get_active_tiling_child
Also renames container to con in one function to prevent ugly line
wrapping.
2018-09-16 22:01:54 +10:00
William Wold e787a1581c Give windows pointer focus immediately when they are switched to
Fixes #2401 (aka #2558)

Previously, when switching windows, pointer focus was not changed until the pointer was moved. This makes the pointer enter happen immediately, without the side effects of other attempted fixes.
2018-09-10 10:18:12 -07:00
Ryan Dwyer 908095ef9a Introduce seat_set_focus_container and seat_set_focus_workspace
These are the same as seat_set_focus, but accept a specific type rather
than using nodes. Doing this adds more typesafety and lets us avoid
using &con->node which looks a little ugly.

This fixes a crash that pretty much nobody would ever come across. If
you have a bindsym for "focus" with no arguments and run it from an
empty workspace, sway would crash because it assumes `container` is not
NULL.
2018-09-06 19:26:56 +10:00
Ryan Dwyer 8859da1dc3 Fix crash when focusing from fullscreen in an invalid direction
* Fullscreen a view
* Run `focus <direction>` where there is no output in that direction

The output returned was rightfully NULL, which needs to be handled.
2018-09-06 12:03:13 +10:00
Ryan Dwyer 7263e39f64 Fix crash when using focus parent/child from an empty workspace 2018-09-05 18:01:43 +10:00
Ryan Dwyer 7f40b928c7 Fix another focus bug when moving into output
Find the focused_inactive view rather than possibly selecting a parent.
2018-09-05 18:01:43 +10:00
Ryan Dwyer 0df04e27b6 Fix crash when focus hits edge of root 2018-09-05 18:01:43 +10:00
Ryan Dwyer 7586f150c0 Implement type safe arguments and demote sway_container
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.

In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.

If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.

There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.

In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.

The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.

The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.

Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.

Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.

In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.

container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.

`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.

container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.

There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.

The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
2018-09-05 18:01:43 +10:00
Ryan Dwyer 5dbbab7bdc Remove layout.c
When we have type safety we'll need to have functions for
workspace_add_tiling and so on. This means the existing container
functions will be just for containers, so they are being moved to
container.c. At this point layout.c doesn't contain much else, so I've
relocated everything and removed the file.

* container_swap and its static functions have been moved to the swap
command and made static.
* container_recursive_resize has been moved to the resize command and
made static.
* The following have been moved to container.c:
    * container_handle_fullscreen_reparent
    * container_insert_child
    * container_add_sibling
    * container_add_child
    * container_remove_child
    * container_replace_child
    * container_split
* enum movement_direction and sway_dir_to_wlr have been moved to util.c.

Side note: Several commands included layout.h which then included
root.h. With layout.h gone, root.h has to be included by those commands.
2018-08-26 12:05:16 +10:00
Ryan Dwyer f4bc25bcc6 Relocate container_move, container_move_to and container_get_in_direction
* container_move is only called from the move command
* container_move_to was called from both the move command and the sticky
command, but the sticky command can easily not call it
* container_get_in_direction is only called from the focus command

Moving these functions to their respective commands gives better
separation of code and removes bloat from layout.c. These functions will
need to be refactored to take advantage of type safety, so separating
them will make this easier to refactor.

The following static functions have also been moved:

* is_parellel
* invert_movement
* move_offs
* container_limit
* workspace_rejigger
* move_out_of_tabs_stacks
* get_swayc_in_output_direction

They were all used by the move functions, except for the last one which
is used by focus.

Other changes:

* index_child has been renamed to container_sibling_index, moved to
container.c and made public
* sway_output_from_wlr has been renamed to output_from_wlr_output, moved
to output.c and made public
* container_handle_fullscreen_reparent has been made public
* sway_dir_to_wlr has been made public

No changes have been made to any of the moved functions, other than
updating calls to functions that have been renamed.
2018-08-25 12:09:42 +10:00
Ryan Dwyer 2b5a404ac9 Replace hacky L_FLOATING container with a list
Workspaces previously had a magical `workspace->floating` container,
which had a layout of L_FLOATING and whose children were actual floating
views. This allowed some conveniences, but was a hacky solution because
the container has to be exempt from focus, coordinate transactions with
the workspace, and omit emitting IPC events (which we didn't do).

This commit changes it to be a list directly in the sway_workspace. The
L_FLOATING layout is no longer used so this has been removed as well.

* Fixes incorrect check in the swap command (it checked if the
containers had the L_FLOATING layout, but this layout applied to the
magical container).
* Introduces workspace_add_floating
2018-08-19 16:18:33 +10:00
Ian Fan b3f7801fca commands: prevent focusing mode with no containers
Explicitly fail when trying to focus tiling/floating when there are no tiling/floating containers.
2018-08-18 17:25:06 +01:00
Ryan Dwyer 3a888163a0 Refactor seat_get_focus functions
Fixes #2467.

This commit introduces seat_get_focus_inactive_floating to supplement
seat_get_focus_inactive_tiling, and uses it during `focus mode_toggle`
which fixes a focus bug.

This also refactors the seat_get_focus_inactive functions so that they
do their selection logic themselves rather than offloading it to
seat_get_focus_by_type which was getting bloated. seat_get_focus_by_type
is now removed.

Lastly, this commit changes seat_get_focus to just return the first
container in the focus stack rather than looping and calling
seat_get_focus_by_type.
2018-08-17 17:32:53 +10:00
Ryan Dwyer 538e083f61 Fix focus mode_toggle from a child of a floating container
Also fixes a crash when unfloating a window. It needs to add it back to
the tiling tree as a sibling rather than a child, because the reference
container might be a view.
2018-07-28 22:41:04 +10:00
Ryan Dwyer da2a87f6c7 When unfloating, return container to previously focused tiled container
This introduces seat_get_focus_inactive_tiling and updates
`focus mode_toggle` to use it instead, because the previous method
wasn't guaranteed to return a tiling view.
2018-07-28 22:41:04 +10:00
Ryan Dwyer 32806d16ee Use parse_movement_direction 2018-07-19 20:17:48 +10:00
Ryan Dwyer 08736255a3 Defer the focus commands 2018-07-19 16:41:02 +10:00
Ryan Dwyer a173b79c54 Implement focus output command 2018-07-19 16:33:27 +10:00
emersion 48c98b676f
Implement focus mode_toggle 2018-07-09 22:22:17 +01:00
Tony Crisci 5e024278a6 Merge branch 'wlroots' into seat-fixes 2018-04-02 13:23:43 -04:00
Drew DeVault b2d871cfe2 Partially implement move command
Works:

- move [container|window] to workspace <name>
    - Note, this should be able to move C_CONTAINER but this is untested
- move [workspace] to output [left|right|up|down|<name>]

Not implemented yet:

- move [left|right|up|down]
- move scratchpad
- move position
2018-04-02 11:12:18 -04:00
Tony Crisci e677c5b204 rename seat functions 2018-04-02 08:45:37 -04:00
Tony Crisci dc8c9fbeb6 Revert "Merge pull request #1653 from swaywm/revert-1647-refactor-tree"
This reverts commit 472e81f35d, reversing
changes made to 6b7841b11f.
2018-03-29 23:41:33 -04:00
Drew DeVault d0c7f66e95
Revert "Refactor tree" 2018-03-29 23:29:29 -04:00