c28802c3d8
ccs: tristar: get scaling on launch
...
this should also make Tristar::new return an error if the port exists
but doesn't have a modbus device there - previously this would fail
later when it times out reading registers
2025-01-09 11:32:02 +11:00
20a7ad6ddd
ccs: tristar: remove useless Option around scaling
2025-01-09 11:23:33 +11:00
9d8b4b23b1
ccs: modbus tcp
2025-01-09 10:22:35 +11:00
7e664848dd
release v1.9.9-pre-15
Build and release .deb / Release (push) Successful in 52s
2025-01-09 10:00:02 +11:00
cc2f493401
ccs: pl: retry reads
2025-01-09 09:51:30 +11:00
7ceaf73037
ccs: migratable config
2025-01-09 09:20:09 +11:00
8b26a8d6bb
ccs: tristar: explicit serial timeout
Build and release .deb / Release (push) Successful in 53s
2025-01-03 14:16:34 +11:00
9c87f12a7d
pl: charge/load ah
...
commented out for now; because reading from the pl takes ages
2024-12-31 15:35:19 +11:00
97b5cfc370
v1.9.9-pre-13: optionally log pl accumulators
Build and release .deb / Release (push) Successful in 57s
2024-12-31 15:05:18 +11:00
9272aa20ad
v1.9.9-pre-12: fix pl load current
Build and release .deb / Release (push) Successful in 55s
2024-12-30 22:07:28 +11:00
4445f874ea
release v1.9.9-pre-11
Build and release .deb / Release (push) Successful in 52s
2024-12-30 20:45:37 +11:00
5a0265f6df
ccs: send disable voltage when follow disabled
2024-12-30 20:45:27 +11:00
ea3a88eb4a
release v1.9.9-pre-10
Build and release .deb / Release (push) Successful in 1m55s
2024-12-30 20:30:59 +11:00
ad8a7b253f
ccs: disable from web
2024-12-30 20:30:45 +11:00
ec8bbdbd41
nightly toolchain
2024-12-30 20:28:29 +11:00
5359d679cb
ccs: disable/enable control from endpoint
2024-12-30 20:00:45 +11:00
fbe4214918
format toml
2024-12-30 19:52:11 +11:00
a1a80276c9
ccs: clippy
2024-12-30 15:16:04 +11:00
51aec2ce00
release v1.9.9-pre-9
Build and release .deb / Release (push) Successful in 52s
2024-12-30 14:10:14 +11:00
46e23d1da1
ccs: actually follow primary! please be careful
2024-12-30 14:09:43 +11:00
296e1d0ccf
release v1.9.9-pre-8
Build and release .deb / Release (push) Successful in 53s
2024-12-30 13:47:19 +11:00
11503615de
ccs: follow primary
...
so far only printing so that we dont cook it
2024-12-30 13:47:01 +11:00
59994c75c1
tesla charge rate controller: builds
2024-12-29 16:20:59 +11:00
786701794e
release v1.9.9-pre-7
Build and release .deb / Release (push) Successful in 53s
2024-12-29 12:28:31 +11:00
8a48645b53
tristar: add gauges and fix negative temperatures
2024-12-29 12:28:15 +11:00
1552a10518
v1.9.9-pre-6: clean exit
Build and release .deb / Release (push) Successful in 51s
2024-12-28 22:57:13 +11:00
0205b9be37
cleanup
2024-12-28 22:53:01 +11:00
34a735deec
v1.9.9-pre-5: primary interface endpoint
Build and release .deb / Release (push) Successful in 50s
2024-12-28 22:45:31 +11:00
0a4e7055fe
v1.9.9-pre-4
Build and release .deb / Release (push) Successful in 51s
2024-12-28 22:39:26 +11:00
bda2d63e99
pl: async serial
2024-12-28 22:39:15 +11:00
bc0da6be11
cleanup+change label names
Build and release .deb / Release (push) Successful in 51s
2024-12-28 21:09:19 +11:00
29dcb5b9d8
release 1.9.9-pre-2
Build and release .deb / Release (push) Successful in 52s
2024-12-28 20:40:48 +11:00
70c9188f55
supervisor: web
2024-12-28 20:39:07 +11:00
2c7aa8641c
split: initial (and bad)
Build and release .deb / Release (push) Successful in 52s
2024-12-28 19:04:43 +11:00
5d2d310e6e
begin restructure into two binaries
2024-12-28 13:52:49 +11:00
983f2fe1a8
v1.5.2 release
Build and release .deb / Release (push) Successful in 1m23s
2024-12-28 12:45:45 +11:00
f7e0d43789
charging state: add unavailable
2024-12-28 12:45:13 +11:00
04deece7c1
v1.5.1 release
Build and release .deb / Release (push) Successful in 1m24s
2024-12-28 09:18:48 +11:00
f337e0335d
webapp: formatting
2024-12-28 09:18:26 +11:00
9e072863f7
webapp: remove reauthenticate link
2024-12-28 09:17:20 +11:00
2fe3182706
actions: simplify
Build and release .deb / Release (push) Successful in 1m26s
2024-12-26 23:00:56 +11:00
88ba179ad1
actions: cargo deb + reorder
Build and release .deb / Build (push) Failing after 1m26s
Build and release .deb / Release (push) Failing after 3s
2024-12-26 22:51:40 +11:00
8b92775e31
actions: rustup default stable
Build and release .deb / Build (push) Failing after 1m37s
Build and release .deb / Release (push) Failing after 3s
2024-12-26 22:46:04 +11:00
1db851f286
actions: update toolchain
Build and release .deb / Build (push) Failing after 3s
Build and release .deb / Release (push) Failing after 2s
2024-12-26 22:45:13 +11:00
3e19cc01fa
actions: remove sccache
Build and release .deb / Build (push) Failing after 9s
Build and release .deb / Release (push) Failing after 3s
2024-12-26 22:35:37 +11:00
401266689b
version 1.5.0
Build and release .deb / Build (push) Failing after 11s
Build and release .deb / Release (push) Failing after 9s
2024-12-26 22:33:11 +11:00
081997bb1c
update packaging to use musl target
2024-12-26 22:31:58 +11:00
0553cdd8bf
gauges: set as disconnected if no data
2024-12-26 22:30:21 +11:00
33f484846f
remove dead code
2024-12-26 22:27:39 +11:00
f3a09c9363
update to use ble http proxy
2024-12-26 22:22:21 +11:00
