This restores default portable 'C' locale when target locale is unsupported
by X11 backend (Xlib).
When target locale is unsupported by X11, some locale-dependent Xlib
functions like `XSetLocaleModifiers` fail or have no effect triggering
later failures and panics.
When target locale is not valid, `setLocale` should normally leave the
locale unchanged (`setLocale` returns 'C'). However, in some situations,
locale is accepted by `setLocale` (`setLocale` returns the new locale)
but the accepted locale is unsupported by Xlib (`XSupportsLocale` returns
`false`).
Fix#636
* On Wayland, fix coordinates in touch events when scale factor isn't 1
* Explicitly state that Wayland is using LogicalPosition internally
* Fix CHANGELOG
* Don't discard high-precision cursor position data
Most platforms (X11, wayland, macos, stdweb, ...) provide physical
positions in f64 units, which can contain meaningful fractional
data. For example, this can be empirically observed on modern X11
using a typical laptop touchpad. This is useful for e.g. content
creation tools, where cursor motion might map to brush strokes on a
canvas with higher-than-screen resolution, or positioning of an object
in a vector space.
* Update CHANGELOG.md
Co-Authored-By: Murarth <murarth@gmail.com>
Co-authored-by: Murarth <murarth@gmail.com>
* Rename hidpi_factor to scale_factor
* Deprecate WINIT_HIDPI_FACTOR environment variable in favor of WINIT_X11_SCALE_FACTOR
* Rename HiDpiFactorChanged to DpiChanged and update docs
I'm renaming it to DpiChanged instead of ScaleFactorChanged, since I'd
like Winit to expose the raw DPI value at some point in the near future,
and DpiChanged is a more apt name for that purpose.
* Format
* Fix macos and ios again
* Fix bad macos rebase
* Begin implementing DPI generics
* Fix multithreaded example
* Format
* Fix serde test
* hopefully fix most of the errors
* Fix dpi module errors
* More error fixings
* Format
* fix macos errors
* Another error pass
* Replace bad type signatures
* more fixins
* Fix compile errors
* Use `mio` for the X11 event loop
* Removes `calloop` from the X11 event loop, as the method of draining a
source using a closure provided to the `calloop::EventLoop` instance
conflicts with the need to deliver events directly to the callback
provided to `EventLoop::run`, in order to respond to the value provided by
`WindowEvent::HiDpiFactorChanged`.
* Implement interactive `HiDpiFactorChanged` event for X11
* Implement interactive `HiDpiFactorChanged` event for Wayland
* Run cargo fmt
* Fix Wayland not processing events from EventQueue
* Backport #981
* On X11, make `WINIT_HIDPI_FACTOR` dominate `Xft.dpi` in some cases
This commit makes `WINIT_HIDPI_FACTOR` dominate `Xft.dpi` in general and
adds a special value `0` for `WINIT_HIDPI_FACTOR` to use winit computed
DPI factor with randr over Xft.dpi.
* Use `randr` instead of `0` for auto dpi scaling
* Update CHANGELOG
* blow up on wrong env var
* Allow empty string for env var
* Move DeviceEvent handling to the message target window.
Previously, device events seem to have only been sent to one particular
window, and when that window was closed Winit would stop receiving
device events. This also allows users to create windowless event loops
that process device events - an intriguing idea, to say the least.
* Emit LWin and RWin VirtualKeyCodes on Windows
* Implement ModifiersChanged on Windows
* Make ModifiersChanged a tuple variant instead of a struct variant
* Add changelog entries
* Format
* Update changelog entry
* Fix AltGr handling
* Reformat
* Publicly expose ModifiersChanged and deprecate misc. modifiers fields
* Change ModifiersState to a bitflags struct
* Make examples work
* Add modifier state methods
* all things considered, only erroring out in one file throughout all of these changes is kinda impressive
* Make expansion plans more clear
* Move changelog entry
* Try to fix macos build
* Revert modifiers println in cursor_grab
* Make serde serialization less bug-prone
* Implement changes to `RedrawRequested` event
Implements the changes described in #1041 for the X11 platform and for
platform-independent public-facing code.
* Fix `request_redraw` example
* Fix examples in lib docs
* Only issue `RedrawRequested` on final `Expose` event
Mutter can reposition window on resize, if it is behind mutter's "bounding box".
So, when you start winit window in maximized mode with CSD, mutter places its CSD
behind the GNOME's status bar initially, and then sends configure with the
exact same size as your current window. If winit decides to optimize calling
frame.resize(..) in this case, we won't call set_geometry(we're calling
it through resize) and GNOME won't reposition your window to be inside the
"bounding box", which is not a desired behavior for the end user.
* X11: Report `CursorMoved` when touch event occurs
* Only trigger CursorMoved events for the first touch ID
* Fix testing for current touch events
* Fix first touch logic
* X11: Sync key press/release with window focus
* When a window loses focus, key release events are issued for all pressed keys
* When a window gains focus, key press events are issued for all pressed keys
* Adds `is_synthetic` field to `WindowEvent` variant `KeyboardInput`
to indicate that these events are synthetic.
* Adds `is_synthetic: false` to `WindowEvent::KeyboardInput` events issued
on all other platforms
* Clarify code with comments
* X11: Fix incorrect modifiers when events are missed
* Syncs modifier state with state data in X key/button/motion events.
* Fixes modifier state in XWayland, as xinput2 raw input events will
not be received when a window does not have focus.
* Removes `impl From<_> for ModifiersState` on X11/Wayland API types,
replacing them with `pub(crate)` methods.
* Cleanup modifier state update using a macro
* Remove keys from modifier state when updating
* X11: Fix window creation hangs when another application is fullscreen
Previously, the X11 backend would block until a `VisibilityNotify` event
is received when creating a Window that is visible or when calling
`set_visible(true)` on a Window that is not currently visible. This
could cause winit to hang in situations where the WM does not quickly
send this event to the application, such as another window being
fullscreen at the time.
This behavior existed to prevent an X protocol error caused by setting
fullscreen state on an invisible window. This fix instead stores desired
fullscreen state when `set_fullscreen` is called (iff the window is not
visible or not yet visible) and issues X commands to set fullscreen
state when a `VisibilityNotify` event is received through the normal
processing of events in the event loop.
* Add window_debug example to facilitate testing
* Add a CHANGELOG entry
* Call `XUnmapWindow` if `VisibilityNotify` is received on an invisible window
* Prevent EventLoop from getting initialized outside the main thread
This only applies to the cross-platform functions. We expose functions
to do this in a platform-specific manner, when available.
* Add CHANGELOG entry
* Formatting has changed since the latest stable update...
* Fix error spacing
* Unix: Prevent initializing EventLoop outside main thread
* Updates libc dependency to 0.2.64, as required by BSD platforms
* Update CHANGELOG.md for Linux implementation
* Finish sentence
* Consolidate documentation
* Fixed relative_pointer not being set up when the "zwp_relative_pointer_manager_v1" callback comes after the "wl_seat" callback
* Ran cargo fmt
* Updated changelog
* Added wayland support for set_grab_cursor and set_cursor_visible
* Updated changelog
* Ran cargo fmt
* Fixed set_cursor_visible and set_cursor_grab so they can be called from any thread.
* Ran cargo_fmt
* Improved CHANGELOG
* Added workaround so that when cursor is hidden it takes effect before the cursor enters the surface. Making the cursor visible again still only happens once the cursor re-enters the surface
* Switched to using Rc<RefCell> instead of Arc<Mutex> since all accesses to the relative_pointer_manager_proxy will happen on the same thread.
* Forgot to run cargo fmt
* Switched to using Rc and RefCell instead of Arc and Mutex where applicable.
* Improved comments and documentation relating to changing a hidden cursor back to visible on wayland.
* Wayland: Fixed cursor not appearing immendiately when setting the cursor to visible.
* Forgot to run cargo fmt
* Switched to only storing the pointers in CursorManager as AutoPointer.
* Fixed typo and removed println
* Update CHANGELOG.md
Co-Authored-By: Kirill Chibisov <wchibisovkirill@gmail.com>
* Fixed relative_pointer not being set up when the "zwp_relative_pointer_manager_v1" callback comes after the "wl_seat" callback
* Ran cargo fmt
* Updated changelog
* Improved CHANGELOG
* Switched to using Rc<RefCell> instead of Arc<Mutex> since all accesses to the relative_pointer_manager_proxy will happen on the same thread.
* Forgot to run cargo fmt
* X11: Fix panic when no monitors are available
* Set dummy monitor's dimensions to `(1, 1)`
* X11: Avoid panicking when there are no monitors in Window::new
* Allow using multiple `XWindowType`s on X11 (#1140)
* Update documentation to make combining window types clearer
* Update build flags because X11 runs on more than just Linux
* Revert "Update build flags because X11 runs on more than just Linux"
This reverts commit 882b9100462a5ee0cf89dcd42891ebd0f709964f.
* Revert "Update documentation to make combining window types clearer"
This reverts commit da00ad391a8ce42cea08b577b216316b013f9e36.
* Revert "Allow using multiple `XWindowType`s on X11 (#1140)"
This reverts commit a23033345697463400286c4d297f5c1552369fc2.
* Allow using multiple `XWindowType`s on X11 (slice variant) (#1140)
* Multiple `XWindowType`s, with non-static lifetime.
* Multiple `XWindowType`s (#1140) (`Vec` variant)
* Append change to changelog.
* Fix formatting.
