Commit graph

75 commits

Author SHA1 Message Date
Brian Ashworth 9670ccee68 bindings: defer while initiailizing
This adds the logic to defer binding execution while sway is still
initializing. Without this, the binding command would be executed, but
the command handler would return CMD_DEFER, which was being treated as
a failure to run. To avoid partial executions, this will defer all
bindings while config->active is false.
2019-06-12 07:56:41 +03:00
Brian Ashworth 69a1a0ff99 Fix scratchpad fullscreen behavior and crash
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.

This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
  into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
  scratchpad, it will be fullscreen when shown (and fullscreen disabled
  when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
  scratchpad, it will be shown immediately as fullscreen global. The
  container is not moved to a workspace and remains in the
  scratchpad. The container will be visible until fullscreen disabled
  or killed. Since the container is in the scratchpad, running
  `scratchpad show` or `move container to scratchpad` will have no
  effect

This also changes `container_replace` to transfer fullscreen and
scratchpad status.
2019-04-13 08:48:37 -06:00
Ryan Walklin bdb402404c Support WLR_INPUT_DEVICE_SWITCH in sway
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.

Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>

Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID

<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE

(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
2019-03-19 23:58:47 -04:00
Ryan Dwyer 7b9ae42331 Introduce default seatop
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.

The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.

Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.

The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.

The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.

The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.

The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.

The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
2019-03-17 10:02:04 -06:00
Ryan Dwyer fb3475e291 Replace seatup allows_events with button callback 2019-03-17 10:02:04 -06:00
Ryan Dwyer d16845d5f0 Don't send button events to surfaces when dragging or resizing
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.

The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
2019-03-11 14:55:54 +01:00
emersion 88b283c557 seat: don't send button release when not pressed
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.

This commit moves the logic used to send pressed/released into the "down"
operation.
2019-02-28 23:02:06 -05:00
emersion 656541bcc4
Update for swaywm/wlroots#1517 2019-02-23 19:04:10 +01:00
Las cedde21c96 Implement pointer-constraints-unstable-v1 2019-01-30 19:53:59 +01:00
emersion 75406bb93b Update for swaywm/wlroots#1402 2019-01-24 11:48:19 +01:00
Drew DeVault 23ab56bbf7
Merge pull request #3402 from RyanDwyer/refactor-seatops
Refactor seat operations to use an interface
2019-01-13 20:38:34 -05:00
Ryan Dwyer ed5aafd90b Refactor seat operations to use an interface
This splits each seat operation (drag/move tiling/floating etc) into a
separate file and introduces a struct sway_seatop_impl to abstract the
operation.

The move_tiling_threshold operation has been merged into move_tiling.

The main logic for each operation is untouched aside from variable
renames.

The following previously-static functions have been made public:
* node_at_coords
* container_raise_floating
* render_rect
* premultiply_alpha
* scale_box
2019-01-10 22:04:42 +10:00
Brian Ashworth 4696f49ecc reload: reset input configs
This resets all input options to their defaults on reload. This also
fixes some debug log typos in `input_manager_libinput_config_pointer`.
2019-01-09 11:24:15 -05:00
Brian Ashworth 5bf4daf263 Implement tiling_drag_threshold
Implements `tiling_drag_threshold <threshold>` to prevent accidental
dragging of tiling containers. If a container (and all of its
descendants) are unfocused and the tile bar is pressed, a threshold
will be used before actually starting the drag. Once the threshold has
been exceeded, the cursor will change to the grab icon and the operation
will switch from `OP_MOVE_TILING_THRESHOLD` to `OP_MOVE_TILING`.
2019-01-02 23:33:33 +01:00
Brian Ashworth 4d88c95790 hide_cursor: change to a seat subcommand
This makes hide_cursor a seat subcommand, which allows for seat specific
timeouts.
2018-12-30 14:17:24 +01:00
Ryan Dwyer c5a6c37275 Make workspace back_and_forth seat-specific
* When using multiple seats, each seat has its own prev_workspace_name
for the purpose of workspace back_and_forth.
* Removes prev_workspace_name global variable.
* Removes unused next_name_map function in tree/workspace.c.
* Fixes memory leak in seat_destroy (seat was not freed).
2018-10-21 11:26:22 +10:00
Ryan Dwyer c006717910 Minor refactor of input manager
The input manager is a singleton object. Passing the sway_input_manager
argument to each of its functions is unnecessary, while removing the
argument makes it obvious to the caller that it's a singleton. This
patch removes the argument and makes the input manager use server.input
instead.

On a similar note:

* sway_input_manager.server is removed in favour of using the server
global.
* seat.input is removed because it can get it from server.input.

Due to a circular dependency, creating seat0 is now done directly in
server_init rather than in input_manager_create. This is because
creating seats must be done after server.input is set.

Lastly, it now stores the default seat name using a constant and removes
a second reference to seat0 (in input_manager_get_default_seat).
2018-10-20 13:11:43 +10:00
Ryan Dwyer 4d743b64d0 Fix logic used for mouse_warping output
Turns out we don't need to store the previous focus, and it should be
based on which output the cursor was in.
2018-10-19 22:28:02 +10:00
Ryan Dwyer a2fdac2c4b Consider cursor warp when switching workspaces
Fixes a regression introduced in
24a90e5d86.

consider_warp_to_focus has been renamed to seat_consider_warp_to_focus,
moved to seat.c and made public. It is now called when switching
workspaces via `workspace <ws>`.
2018-10-19 08:00:13 +10:00
Ryan Dwyer 24a90e5d86 Remove cursor warping from seat_set_focus
Because cursor warping was the default behaviour in seat_set_focus,
there may be cases where we may have been warping the cursor
unintentionally. This patch removes cursor warping from seat_set_focus
and only does it in the focus command. This is managed by a static
function in focus.c.

To know whether to warp or not, we need to know which node had focus
previously. To keep track of this easily, seat->prev_focus has been
introduced and is set to the previous in seat_set_focus.
2018-10-18 23:08:45 +10:00
Ryan Dwyer 05284b65db Prevent duplicate workspace::focus events
Previously we would compare the last focus's workspace with the new
focus's workspace to determine if we need to emit an IPC
workspace::focus event. This doesn't work when moving the focused
container to a new workspace.

This adds a workspace property to the seat which stores the last emitted
workspace::focus workspace. Using this method, after moving the
container, refocusing it will trigger exactly one workspace::focus
event: from the old workspace to the new workspace.
2018-10-16 08:17:24 +10:00
Ryan Dwyer 26278b694c Introduce seat_set_raw_focus and remove notify argument from seat_set_focus_warp
This introduces seat_set_raw_focus: a function that manipulates the
focus stack without doing any other behaviour whatsoever. There are a
few places where this is useful, such as where we set focus_inactive
followed by another call to set the real focus again. With this change,
the notify argument to seat_set_focus_warp is also removed as these
cases now use the raw function instead.

A bonus of this is we are no longer emitting window::focus IPC events
when setting focus_inactive, nor are we sending focus/unfocus events to
the surface.

This also fixes the following:

* When running `move workspace to output <name>` and moving the last
workspace from the source output, the workspace::focus IPC event is no
longer emitted for the newly created workspace.
* When splitting the currently focused container, unfocus/focus events
will not be sent to the surface when giving focus_inactive to the newly
created parent, and window::focus events will not be emitted.
2018-10-15 21:06:24 +10:00
Ryan Dwyer f6e218a643 Rename seat_get_active_child to seat_get_active_tiling_child
Also renames container to con in one function to prevent ugly line
wrapping.
2018-09-16 22:01:54 +10:00
emersion 7699c5444c Update for swaywm/wlroots#1243 2018-09-14 19:21:44 +02:00
Ryan Dwyer 8bb40c24c7 Implement tiling drag
Hold floating_modifier and drag a tiling view to a new location.
2018-09-11 21:34:21 +10:00
Ryan Dwyer d4e80cf301 Rename OP_MOVE to OP_MOVE_FLOATING
In preparation for introducing OP_MOVE_TILING.
2018-09-11 16:56:05 +10:00
Ryan Dwyer 908095ef9a Introduce seat_set_focus_container and seat_set_focus_workspace
These are the same as seat_set_focus, but accept a specific type rather
than using nodes. Doing this adds more typesafety and lets us avoid
using &con->node which looks a little ugly.

This fixes a crash that pretty much nobody would ever come across. If
you have a bindsym for "focus" with no arguments and run it from an
empty workspace, sway would crash because it assumes `container` is not
NULL.
2018-09-06 19:26:56 +10:00
Ryan Dwyer 7586f150c0 Implement type safe arguments and demote sway_container
This commit changes the meaning of sway_container so that it only refers
to layout containers and view containers. Workspaces, outputs and the
root are no longer known as containers. Instead, root, outputs,
workspaces and containers are all a type of node, and containers come in
two types: layout containers and view containers.

In addition to the above, this implements type safe variables. This
means we use specific types such as sway_output and sway_workspace
instead of generic containers or nodes. However, it's worth noting that
in a few places places (eg. seat focus and transactions) referring to
them in a generic way is unavoidable which is why we still use nodes in
some places.

If you want a TL;DR, look at node.h, as well as the struct definitions
for root, output, workspace and container. Note that sway_output now
contains a workspaces list, and workspaces now contain a tiling and
floating list, and containers now contain a pointer back to the
workspace.

There are now functions for seat_get_focused_workspace and
seat_get_focused_container. The latter will return NULL if a workspace
itself is focused. Most other seat functions like seat_get_focus and
seat_set_focus now accept and return nodes.

In the config->handler_context struct, current_container has been
replaced with three pointers: node, container and workspace. node is the
same as what current_container was, while workspace is the workspace
that the node resides on and container is the actual container, which
may be NULL if a workspace itself is focused.

The global root_container variable has been replaced with one simply
called root, which is a pointer to the sway_root instance.

The way outputs are created, enabled, disabled and destroyed has
changed. Previously we'd wrap the sway_output in a container when it is
enabled, but as we don't have containers any more it needs a different
approach. The output_create and output_destroy functions previously
created/destroyed the container, but now they create/destroy the
sway_output. There is a new function output_disable to disable an output
without destroying it.

Containers have a new view property. If this is populated then the
container is a view container, otherwise it's a layout container. Like
before, this property is immutable for the life of the container.

Containers have both a `sway_container *parent` and
`sway_workspace *workspace`. As we use specific types now, parent cannot
point to a workspace so it'll be NULL for containers which are direct
children of the workspace. The workspace property is set for all
containers, except those which are hidden in the scratchpad as they have
no workspace.

In some cases we need to refer to workspaces in a container-like way.
For example, workspaces have layout and children, but when using
specific types this makes it difficult. Likewise, it's difficult for a
container to get its parent's layout when the parent could be another
container or a workspace. To make it easier, some helper functions have
been created: container_parent_layout and container_get_siblings.

container_remove_child has been renamed to container_detach and
container_replace_child has been renamed to container_replace.

`container_handle_fullscreen_reparent(con, old_parent)` has had the
old_parent removed. We now unfullscreen the workspace when detaching the
container, so this function is simplified and only needs one argument
now.

container_notify_subtree_changed has been renamed to
container_update_representation. This is more descriptive of its
purpose. I also wanted to be able to call it with whatever container was
changed rather than the container's parent, which makes bubbling up to
the workspace easier.

There are now state structs per node thing. ie. sway_output_state,
sway_workspace_state and sway_container_state.

The focus, move and layout commands have been completely refactored to
work with the specific types. I considered making these a separate PR,
but I'd be backporting my changes only to replace them again, and it's
easier just to test everything at once.
2018-09-05 18:01:43 +10:00
Ryan Dwyer 07a897b3b7 Don't send motion if the cursor hasn't moved
Prevents GTK+ comboboxes from immediately closing.
2018-08-18 09:29:18 +10:00
Ryan Dwyer b637b61a7a Rename mousedown to down and make seat operation a named enum 2018-08-18 09:18:32 +10:00
Ryan Dwyer a36625a482 Implement mousedown operation
This allows you to move the cursor off the surface while dragging its
scrollbar.
2018-08-18 09:18:32 +10:00
Ryan Dwyer 3a888163a0 Refactor seat_get_focus functions
Fixes #2467.

This commit introduces seat_get_focus_inactive_floating to supplement
seat_get_focus_inactive_tiling, and uses it during `focus mode_toggle`
which fixes a focus bug.

This also refactors the seat_get_focus_inactive functions so that they
do their selection logic themselves rather than offloading it to
seat_get_focus_by_type which was getting bloated. seat_get_focus_by_type
is now removed.

Lastly, this commit changes seat_get_focus to just return the first
container in the focus stack rather than looping and calling
seat_get_focus_by_type.
2018-08-17 17:32:53 +10:00
Ryan Dwyer b4a0363d17 Implement resizing tiled containers via cursor
* The OP_RESIZE seat operation has been renamed to OP_RESIZE_FLOATING,
and OP_RESIZE_TILING has been introduced.
* Similar to the above, seat_begin_resize and handle_resize_motion have
been renamed and tiling variants introduced.
* resize.c's resize_tiled has to be used, so container_resize_tiled has
been introduced in resize.c to allow external code to call it.
2018-08-12 10:45:54 +10:00
Ian Fan 03eaf444a4 ipc: prevent emitting a workspace::focus event when moving a container to a different workspace or output
When a container is moved from, say, workspace 1 to workspace 2, workspace 2 is focused in order to arrange the windows before focus is moved back to workspace 1, which caused a workspace:focus event from workspace 2 to workspace 1 to be emitted. This commit inhibits that event.
2018-08-01 16:57:15 +01:00
Ryan Dwyer da2a87f6c7 When unfloating, return container to previously focused tiled container
This introduces seat_get_focus_inactive_tiling and updates
`focus mode_toggle` to use it instead, because the previous method
wasn't guaranteed to return a tiling view.
2018-07-28 22:41:04 +10:00
Ryan Dwyer 9df660ee31 Store last button and use it when views request to move or resize 2018-07-22 23:10:19 +10:00
Ryan Dwyer 0c87bff5d1 Replace static handle_end_operation with seat_end_mouse_operation 2018-07-22 23:10:19 +10:00
Ryan Dwyer ff445cc855 Implement xdg shell request_move and request_resize events
Also does a few other related things:

* Now uses enum wlr_edges instead of our own enum resize_edge
* Now uses wlr_xcursor_get_resize_name and removes our own
find_resize_edge_name
* Renames drag to move for consistency
2018-07-22 23:10:19 +10:00
Ryan Dwyer 9fbe13b9be Implement floating_modifier and mouse operations for floating views
This implements the following:

* `floating_modifier` configuration directive
* Drag a floating window by its title bar
* Hold mod + drag a floating window from anywhere
* Resize a floating view by dragging the border
* Resize a floating view by holding mod and right clicking anywhere on
the view
* Resize a floating view and keep aspect ratio by holding shift while
resizing using either method
* Mouse cursor turns into resize when hovering floating border or corner
2018-07-22 23:10:19 +10:00
emersion 747725b8bb Don't unfocus when an override redirect window is mapped 2018-07-18 20:00:48 +01:00
Ryan Dwyer a120d4c79f Make focus part of transactions
Rather than maintain copies of the entire focus stack, this PR
transactionises the focus by introducing two new properties to the
container state and using those when rendering.

* `bool focused` means this container has actual focus. Only one
container should have this equalling true in its current state.
* `struct sway_container *focus_inactive_child` points to the immediate
child that was most recently focused (eg. for tabbed and stacked
containers).
2018-07-15 22:08:26 +10:00
Ryan Dwyer 32b865e610 Fix crash when deleting last child in a tabbed or stacked container
There was no `current` child because the container was destroyed. This
makes it fall back to looking in the parent's current children list.
2018-06-23 17:47:28 +10:00
emersion cfd02918c0
Render drag icons 2018-06-09 13:26:03 +01:00
Ryan Dwyer efc07fb3d4 Don't track damage for views on inactive tabs 2018-05-21 20:16:56 +10:00
Tony Crisci e7771c507a 80char 2018-04-08 15:32:19 -04:00
Tony Crisci de811823b6 seat focus inactive children foreach 2018-04-07 16:14:12 -04:00
Tony Crisci c0f9ee7bd1 seat get focus inactive view 2018-04-07 16:06:36 -04:00
emersion 2b357af7ee
Give keyboard focus to unmanaged xwayland surfaces
This fixes dmenu
2018-04-07 14:03:30 -04:00
Drew DeVault d2d050d59c Address review feedback 2018-04-04 18:47:48 -04:00
Drew DeVault b7e7794912 Implement input-inhibit in sway, swaylock 2018-04-04 18:47:48 -04:00