Commit graph

479 commits

Author SHA1 Message Date
Ryan Dwyer 61699a1146 resize: Determine if anything changed using before/after check
Returning a boolean from container_resize_tiled and resize_tiled doesn't
work in all cases. This patch changes it back to void and does a
before/after check to see if the container was resized.
2018-10-09 22:25:21 +10:00
Brian Ashworth 3f328b6276
Merge branch 'master' into popup-during-fullscreen 2018-10-08 15:18:49 -04:00
Ian Fan efb123899f commands: when setting urgency, check container is not null 2018-10-08 17:48:25 +01:00
Brian Ashworth 09c3c33081 Allow swaynag to be disabled 2018-10-08 09:59:38 -04:00
emersion 45f2cd0c73
Merge pull request #2793 from emersion/disable-swaybg
Allow swaybg to be disabled
2018-10-08 15:50:56 +02:00
emersion ab3a397d58 Fix memory leak in status_command handler 2018-10-08 15:21:20 +02:00
John Axel Eriksson 08139daaa4
Check if there is a current container before setting it's opacity 2018-10-08 15:17:37 +02:00
emersion c988b03d85 Allow swaybg to be disabled
Same as #2791 but for swaybg.

Fixes #2790
2018-10-08 15:08:33 +02:00
Ryan Dwyer 832ebc8966 Implement popup_during_fullscreen
This introduces a new view_impl function: is_transient_for. Similar to
container_has_ancestor but works using the surface parents rather than
the tree.

This patch modifies view_is_visible, container_at and so on to allow
transient views to function normally when they're in front of a
fullscreen view.
2018-10-08 22:49:59 +10:00
Ryan Dwyer 5e1983660d Allow status_command to be disabled via IPC 2018-10-08 22:23:55 +10:00
Ryan Dwyer e168e8f0ff Don't apply seat config when validating 2018-10-08 21:18:30 +10:00
Ryan Dwyer 82423991a8 Reload config using idle event
This patch makes it so when you run reload, the actual reloading is
deferred to the next time the event loop becomes idle. This avoids
several use-after-frees and removes the workarounds we have to avoid
them.

When you run reload, we validate the config before creating the idle
event. This is so the reload command will still return an error if there
are validation errors. To allow this, load_main_config has been adjusted
so it doesn't apply the config if validating is true rather than
applying it unconditionally.

This also fixes a memory leak in the reload command where if the config
failed to load, the bar_ids list would not be freed.
2018-10-08 19:28:53 +10:00
Drew DeVault 92e1fc00fd Shim client.background and client.placeholder
These are not supported by sway, but are valid i3 commands and should not
cause config errors.

Also includes a couple of minor touch-ups.
2018-10-07 14:44:37 -04:00
Jonathan Buch 298ccb539c
Add configuration for raising containers on focus
* New configuration option: raise_floating
  (From the discussion on https://github.com/i3/i3/issues/2990)
* By default, it still raises the window on focus, otherwise it
  will raise the window on click.
2018-10-03 16:23:12 +02:00
Drew DeVault e60ad3f677 Fix some missing commands in sway-input(5) 2018-10-03 07:50:37 -04:00
Drew DeVault 06c214a800
Merge pull request #2703 from RyanDwyer/csd-border
Add CSD to border modes
2018-10-03 13:03:06 +02:00
Brian Ashworth bb25194844 Handle border options for gaps
Fixes `hide_edge_borders smart` when gaps are in use.
Implements `hide_edge_borders smart_no_gaps` and `smart_borders
on|no_gaps|off`.

Since `smart_borders on` is equivalent to `hide_edge_borders smart`
and `smart_borders no_gaps` is equivalent to `hide_edge_borders
smart_no_gaps`, I opted to just save the last value set for
`hide_edge_borders` and restore that on `smart_borders off`. This
simplifies the conditions for setting the border.
2018-10-01 21:19:06 -04:00
Drew DeVault f1dbdce0b2
Merge pull request #2726 from RyanDwyer/overhaul-gaps
Make gaps implementation consistent with i3-gaps
2018-09-30 13:47:35 +02:00
Drew DeVault 8f6aca2166
Merge pull request #2725 from PumbaPe/add-tap-and-drag
Add tap and drag to sway-input
2018-09-30 13:44:11 +02:00
PP ae2b70f59e add tap-and-drag setting to sway-input 2018-09-29 11:49:41 +02:00
emersion 351e722b6e
Merge pull request #2729 from RyanDwyer/resize-return-false
Return an error when resizing is a no op
2018-09-29 11:24:54 +02:00
Ryan Dwyer 42f1fdf015 Return an error when resizing is a no op 2018-09-29 17:05:55 +10:00
Brian Ashworth af45ee2d8b Handle shell special characters in bg file path
This changes it back so the path given to swaybg is enclosed in quotes.

Additionally, the only character that is escaped in the path stored is
double quotes now. This makes it so we don't need to keep an exhaustive
list of characters that need to be escaped.

The end user will still need to escape these characters in their config
or when passed to swaybg.
2018-09-28 23:12:24 -04:00
Ryan Dwyer bb708d0f82 Don't allow negative gaps 2018-09-29 12:58:54 +10:00
Ryan Dwyer 415a48ac63 Make gaps implementation consistent with i3-gaps
This changes our gaps implementation to behave like i3-gaps.

Our previous implementation allowed you to set gaps on a per container
basis. This isn't supported by i3-gaps and doesn't seem to have a
practical use case. The gaps_outer and gaps_inner properties on
containers are now removed as they just read the gaps_inner from the
workspace.

`gaps inner|outer <px>` no longer changes the gaps for all workspaces.
It only sets defaults for new workspaces.

`gaps inner|outer current|workspace|all set|plus|minus <px>` is now
runtime only, and the workspace option is now removed. `current` now
sets gaps for the current workspace as opposed to the current container.

`workspace <ws> gaps inner|outer <px>` is now implemented. This sets
defaults for a workspace.

This also fixes a bug where changing the layout of a split container
from linear to tabbed would cause gaps to not be applied to it until you
switch to another workspace and back.
2018-09-29 11:08:19 +10:00
Ian Fan 98576b9dda swaybar: fix setting binding mode indicator 2018-09-28 13:48:59 +01:00
Ryan Dwyer 138d10d5d6 Rename workspace_outputs to workspace_configs and fix memory leak
When we eventually implement `workspace <ws> gaps inner|outer <px>`,
we'll need to store the gaps settings for workspaces before they're
created. Rather than create a workspace_gaps struct, the approach I'm
taking is to rename workspace_outputs to workspace_configs and then add
gaps settings to that.

I've added a lookup function workspace_find_config. Note that we have a
similar thing for outputs (output_config struct and output_find_config).

Lastly, when freeing config it would create a memory leak by freeing the
list items but not the workspace or output names inside them. This has
been rectified using a free_workspace_config function.
2018-09-28 22:35:38 +10:00
Ryan Dwyer 21ff87d72b Improve CSD logic
This does the following:

* Removes the xdg-decoration surface_commit listener. I was under the
impression the client could ignore the server's preference and set
whatever decoration they like using this protocol, but I don't think
that's right.
* Adds a listener for the xdg-decoration request_mode signal. The
protocol states that the server should respond to this with its
preference. We'll always respond with SSD here.
* Makes it so tiled views which use CSD will still have sway decorations
rendered. To do this, using_csd had to be added back to the view struct,
and the border is changed when floating or unfloating a view.
2018-09-27 22:51:37 +10:00
Ryan Dwyer efcfe57b10 Remove CSD from toggle list if client doesn't support it 2018-09-27 22:51:37 +10:00
Ryan Dwyer 7b138e5ef0 Add CSD to border modes
This replaces view.using_csd with a new border mode: B_CSD. This also
removes sway_xdg_shell{_v6}_view.deco_mode and
view->has_client_side_decorations as we can now get these from the
border.

You can use `border toggle` to cycle through the modes including CSD, or
use `border csd` to set it directly. The client must support the
xdg-decoration protocol, and the only client I know of that does is the
example in wlroots.

If the client switches from SSD to CSD without us expecting it (via the
server-decoration protocol), we stash the previous border type into
view.saved_border so we can restore it if the client returns to SSD. I
haven't found a way to test this though.
2018-09-27 22:51:37 +10:00
Brian Ashworth baeb28ea62 Implement support for input wildcard 2018-09-23 19:56:52 -04:00
Ryan Dwyer 9753e52d6b Flatten container in workspace_rejigger 2018-09-23 14:32:26 +10:00
Ryan Dwyer 0b7fb6943e Fix some bugs as a result of removing move_out_of_tabs_stacks 2018-09-23 13:55:06 +10:00
Ryan Dwyer 93624599b3 Remove move_out_of_tabs_stacks
This fixes the following. Create these layouts and run move right:

(Initial layout -> expected result -> actual result)

* `H[S[unfocused focused] unfocused]` ->
`H[S[unfocused] focused unfocused]` ->
`H[H[S[unfocused] focused] unfocused]`
* `H[S[unfocused focused] V[unfocused]]` ->
`H[S[unfocused] V[unfocused focused]]` ->
`H[H[S[unfocused] focused] V[unfocused]]`

move_out_of_tabs_stacks was originally made to allow views to move out
of the tabbed/stacked container in the parallel direction, but at some
point this has started working using the regular logic.
2018-09-23 13:10:36 +10:00
Ryan Dwyer cb66bbea42 Allow running commands on containers without focusing them
This adds a `con` argument to `execute_command` which allows you to
specify the container to execute the command on. In most cases it leaves
it as `NULL` which makes it use the focused node. We only set it when
executing `for_window` criteria such as when a view maps. This means we
don't send unnecessary IPC focus events, and fixes a crash when the
criteria command is `move scratchpad` (because we can't give focus to a
hidden scratchpad container).

Each of the shell map handlers now check to see if the view has a
workspace. It won't have a workspace if criteria has moved it to the
scratchpad.
2018-09-23 08:39:11 +10:00
Marien Zwart 37e51a20cc Fix compilation against wlroots without X11 backend 2018-09-21 21:25:03 +10:00
Ryan Dwyer db28459634 Introduce create_output command (for developer use)
Should help with testing hotplugging.
2018-09-19 21:54:27 +10:00
William Wold f48999dd24 Fix crash moving out of tab container 2018-09-17 01:20:45 -07:00
Ryan Dwyer f6e218a643 Rename seat_get_active_child to seat_get_active_tiling_child
Also renames container to con in one function to prevent ugly line
wrapping.
2018-09-16 22:01:54 +10:00
Brian Ashworth 17fe8924f2 Address ianyfan's comments
wordexp p is now initialized to {0} to prevent a segfault on wordfree
in the failure case.

File paths with single quotes and double quotes are now supported. The
quote can either be wrapped in the other quote or escaped with three
backslashes.

Additionally to make passing file paths with double quotes to swaybg
easier, instead of enclosing the path given to swaybg in quotes, all
spaces, single quotes, and double quotes in the resulting path are now
escaped with a single backslash.
2018-09-14 08:51:01 -04:00
Brian Ashworth 1cf737489d Escape spaces in background file path 2018-09-13 22:21:10 -04:00
Brian Ashworth 0b64cce733 Allow spaces in background file paths 2018-09-13 22:21:10 -04:00
Ryan Dwyer 2f6935e00f Remove bad assertion in workspace_rejigger
The assertion can be (rightfully) triggered by creating layout
V[H[view view] view] and moving the top right view to the right.

After removing the assertion I found the container being moved needs its
size reset to prevent it from being sized wrongly after arranging.
2018-09-13 17:02:10 +10:00
emersion af9e8f94cc
Merge pull request #2620 from ianyfan/commands
commands: when moving a container, restore focus properly
2018-09-12 09:20:47 +02:00
Brian Ashworth 0b7fe54f9e Update textures for cmd_client_* commands
Since the `client.{focused,focused_inactive,unfocused,urgent}` commands
change colors, the textures need to be updated otherwise the textures
and the rest of the title bar may utilize different colors.
2018-09-11 19:34:57 -04:00
Ian Fan ae535396b0 commands: when moving container, remove its gaps 2018-09-11 16:46:11 +01:00
Ian Fan c770949a9f commands: when moving container, restore focus properly 2018-09-11 16:46:07 +01:00
Ryan Dwyer 8bb40c24c7 Implement tiling drag
Hold floating_modifier and drag a tiling view to a new location.
2018-09-11 21:34:21 +10:00
Ryan Dwyer ec9c4de564 Introduce tiling_drag directive 2018-09-11 17:17:19 +10:00
William Wold e787a1581c Give windows pointer focus immediately when they are switched to
Fixes #2401 (aka #2558)

Previously, when switching windows, pointer focus was not changed until the pointer was moved. This makes the pointer enter happen immediately, without the side effects of other attempted fixes.
2018-09-10 10:18:12 -07:00