* Add rtic-monotonic support for timer & alarms
* Force Alarm interrupt if timer is set too soon
* timer: Remove non_exhaustive attribute from ScheduleAlarmError
* timer: TooSoon is no longer emitted so it can be removed
* Prep for HAL 0.6.0 release
* Update changelog, readme and version number for HAL 0.5.0 release
* Bump HAL version in BSP deps
* Add the missing boards to the main README.md
There are a lot of non-binary crates depending on rp2040-hal. That way,
the default-features of rp2040-hal may be activated unintentionally
through an indirect dependency. Therefore, a binary crate which wants
to disable the `critical-section-impl` feature to provide its own one
could have a hard time to do so.
In contrast, the board support crates are usually only used by top-level
binary crates. So disabling the default features on those should usually
just work.
Binary crates depending on rp2040-hal directly, which don't use any
board support crate, might need to activate the feature manually. This
is reasonable because those binary crates need to replicate some
boilerplate from the board crates anyhow.
* Implement rp2040-E5 workaround for usb enumeration.
* Expand documentation and add to pico_usb_serial & pico_usb_twitchy_mouse
* Fix errata-5 documentation around the bus-keep state.
* Update CHANGELOG.md
Without this change, building the vector_table example fails when
building from the rp2040-hal directory:
```
rp2040-hal$ cargo build --release --example vector_table
Compiling rp2040-hal v0.5.0 (rp2040-hal)
error[E0432]: unresolved import `pac::interrupt`
--> rp2040-hal/examples/vector_table.rs:30:5
|
30 | use pac::interrupt;
| ^^^^^---------
| | |
| | help: a similar name exists in the module (notice the capitalization): `Interrupt`
| no `interrupt` in the root
error: cannot determine resolution for the attribute macro `interrupt`
--> rp2040-hal/examples/vector_table.rs:148:3
|
148 | #[interrupt]
| ^^^^^^^^^
|
= note: import resolution is stuck, try simplifying macro imports
```
* Update changelog, readme and version number for HAL 0.5.0 release
* Bump HAL version in BSP deps
* Point ws2812-pio and i2c-pio-rs at hal_0.5.0 branches
* Update changelog with latest commits and release date
* Add an rp2040 specific #[entry] macro.
This macro extends the one from cortex-m-rt by code to unlock
all spinlocks on boot.
* Idiomatic pointer arithmetic
Apply suggestion by @9names, improving address calculations.
(This doesn't change the generated code at opt levels 2 or "z".)
Co-authored-by: 9names <60134748+9names@users.noreply.github.com>
* Update changelog for 0.4.0 release
* Enable rt feature for irq example in Cargo.toml
* Bump pio/pio-proc deps to 0.2.0, update pio examples
* Update BSPs to latest ws2812-pio, remove unused pio dep
* Fix usage of pio_proc in doc comment
* Clean up pio doc-example
* Update rp-pico to latest i2c-pio
Co-authored-by: Jan Niehusmann <jan@gondor.com>
Somehow we already had a bunch of commits talking about 0.3.0, but it
was never released. Hence why this maybe doesn't change as many version
numbers as you might expect.
* Update to PIO 0.1.0
* Update to latest ws2812-pio and i2c-pio.
These depend on pio 0.1.0, avoiding a conflict
* Rename CI tests.
Also check we can cargo build. And remove 'on host tests' that didn't
do anything.
Co-authored-by: Jonathan Pallant <jonathan.pallant@42technology.com>
* Add boot2 feature. Add boot2 linkage into each BSP optional on feature
* Enable boot2 feature in BSPs by default. Remove boot2 decl from all BSP examples
* Add EXTERN in memory.x for BOOT2_FIRMWARE, rename bootloader static slice to BOOT2_FIRMWARE
* Update new examples and itsy_bitsy BSP to use boot2 feature
* Remove boot2 as a dev-dependency for the BSPs, no longer needed
* Add no_mangle BOOT2_FIRMWARE to adafruit_macropad
* Fix itsy-bitsy blinky - it wasn't using the BSP, so it didn't get BOOT2_FIRMWARE linked in
* Add basic interrupt_disable+spinlock critical-section
* Update impl based on feedback from jannic
* Get rid of count variable, switch to AtomicU8 for lock state
* Remove interrupt::disable that isn't necessary for safety
* Rename variables, re-write most of the comments
* Add fences to ensure ordering
* Implement peripheral support for i2c and an advanced example for the pico board.
* Simplify i2c peripheral bootstrap and add a "free" function to allow switching modes.
* Set dependency to futures & nostd_async to specific version/revision.
* move enum & struct to the start of the file
* Add a bit of documentation to the pico_i2c_controller_peripheral demo.
* Migrate to pico_i2c_controller_peripheral to embassy & simplify the peripheral support
nostd_async is broken since last stable roll out.
The pico_i2c_controller_peripheral is being migrated to use embassy's executor.
The Controller Async API is now aligned with embassy's traits to facilitate integration.
The peripheral no longer require async to run and now appears as an event iterator.
Embassy's support relies on unstable features (generic_associated_types and type_alias_impl_traits)
and is therefore gated behind the `embassy-traits` feature flag.
* make futures & embassy optional for the pico board too
* Pin embassy to a specific rev.
* Impl embassy_traits::i2c::WriteIter & enable unlimited transfer size on i2c
* Applies comment suggestion from @9names for the advanced i2c example.
Co-authored-by: 9names <60134748+9names@users.noreply.github.com>
* use `I2C block` instead of `IP`.
* Fix formatting (unnecessary space at end of line)
* Enhance explanation for why `rd_req()` is not cleared in `Iterator::next`'s
implementation.
Co-authored-by: 9names <60134748+9names@users.noreply.github.com>
