* pio: Move interrupt related (en|dis)abling/forcing methods to the statemachine
The SM knows its id using the type system so there's no need for checking it.
This commit also adds a `PioIRQ` enum to select the output IRQ.
* Move the interrupt control to Rx & Tx and make all accesses to inte atomic
* Adjust the ergonomics of IRQ handling.
* Elide lifetimes where they can be (clippy's advice)
* Prep for HAL 0.6.0 release
* Update changelog, readme and version number for HAL 0.5.0 release
* Bump HAL version in BSP deps
* Add the missing boards to the main README.md
* Implementation of the interpolator.
* corrected formatting
* fixed documentation code
* add clamp flag to LaneCtrl
* addition of an example for the interpolator
* put documentation behind ///
* rewording comment for clarity
* using more idiomatic fn new
There are a lot of non-binary crates depending on rp2040-hal. That way,
the default-features of rp2040-hal may be activated unintentionally
through an indirect dependency. Therefore, a binary crate which wants
to disable the `critical-section-impl` feature to provide its own one
could have a hard time to do so.
In contrast, the board support crates are usually only used by top-level
binary crates. So disabling the default features on those should usually
just work.
Binary crates depending on rp2040-hal directly, which don't use any
board support crate, might need to activate the feature manually. This
is reasonable because those binary crates need to replicate some
boilerplate from the board crates anyhow.
* Use rp2040-hal in all example (possibly through their bsp)
Some of the examples were using the cortex_m_rt::entry method which
misses the device specific spinlock re-initialisation.
This commits makes the usage more consistent by using rp2040_hal exported
macro as the only `entry` method used across examples.
* Implement rp2040-E5 workaround for usb enumeration.
* Expand documentation and add to pico_usb_serial & pico_usb_twitchy_mouse
* Fix errata-5 documentation around the bus-keep state.
* Update CHANGELOG.md
Without this change, building the vector_table example fails when
building from the rp2040-hal directory:
```
rp2040-hal$ cargo build --release --example vector_table
Compiling rp2040-hal v0.5.0 (rp2040-hal)
error[E0432]: unresolved import `pac::interrupt`
--> rp2040-hal/examples/vector_table.rs:30:5
|
30 | use pac::interrupt;
| ^^^^^---------
| | |
| | help: a similar name exists in the module (notice the capitalization): `Interrupt`
| no `interrupt` in the root
error: cannot determine resolution for the attribute macro `interrupt`
--> rp2040-hal/examples/vector_table.rs:148:3
|
148 | #[interrupt]
| ^^^^^^^^^
|
= note: import resolution is stuck, try simplifying macro imports
```
* Add struct VectorTable to represent an interrupt vector table
* Add member function to VectorTable to initialise based on the current Interrupt Vector Table from VTOR
* Add member function to VectorTable to register an extern "C" function to call on interrupt
* Add example using VectorTable to demonstrate initialisation and interrupt function registration
usb_device ignores PollResult::Suspend when already suspended,
and PollResult::Resume when not suspended.
This may lead to repeatedly triggered interrupts if for some reason
the Suspend flag gets set while the device is already suspended.
I observed such a situation when a reset was triggered while the device
was suspended.
To make sure that this can't cause interrupt storms, clear the flags
before returning from poll()
- Clippy warns about empty loops, https://github.com/rust-lang/rust-clippy/issues/6161
- wfi allows to CPU to save some power
WFI was avoided in examples for fear of ill interactions with debuggers.
However the rp2040 debug port does continue to work, as long as the
relevant clocks are not disabled in SLEEP_EN0/SLEEP_EN1. (By default,
all clocks stay enabled in sleep mode.)
This patch replaces several different workarounds with just calling wfi.
The ep0-out buffer must not be marked as available unless required.
Otherwise, the controller will acknowledge the data-out packet but
won't reflect that in its status registers.
This patch forces the controller to nack the data-out phase until we have
processed the setup packet.
As per 4.1.2.5.1, the access to the DPSRAM should "be considered asynchronous
and not atomic".
It is recommended to write to buffer control register in two steps.
A first one to configure all bits but Available.
Wait clk_sys/clk_usb (typically 125MHz/48MHz).
Then set the available bit (if required).
The only thing accessed by those methods is `&mut self`, which is
guaranteed to be a unique reference. So an interrupt can not
interfere with the correctness of the operation.
Implementing `impl From<SystemClock> for Hertz` is a footgun, as
SystemClock is not Copy, so the automatic conversion consumes the
owned clock.
This is visible in the example i2c.rs:
```
let mut i2c = hal::I2C::i2c1(
pac.I2C1,
sda_pin,
scl_pin, // Try `not_an_scl_pin` here
400.kHz(),
&mut pac.RESETS,
clocks.peripheral_clock,
);
```
If the user wants to use both `i2c0` and `i2c1` at the same time,
copying from this example won't work:
```
error[E0382]: use of moved value: `clocks.peripheral_clock`
--> rp2040-hal/examples/i2c.rs:106:9
|
97 | clocks.peripheral_clock,
| ----------------------- value moved here
...
106 | clocks.peripheral_clock,
| ^^^^^^^^^^^^^^^^^^^^^^^ value used here after move
|
= note: move occurs because `clocks.peripheral_clock` has type
`PeripheralClock`, which does not implement the `Copy` trait
```
As getting the frequency from a clock doesn't really need ownership,
changing it to `impl From<&SystemClock> for Hertz` is both more
logical and provides better usability.
This is, however, a breaking change: Code relying on this trait
implementation needs to be changed by adding a `&`.
* Improve comments
* Expose pins and all pins naming struct.
This allows users to set the interrupts on the button pins and to skip the PicoExplorer struct but still use proper naming
* Use correct interrupt names in timer::alarms macro in HAL
* Update changelog, readme and version number for HAL 0.5.0 release
* Bump HAL version in BSP deps
* Point ws2812-pio and i2c-pio-rs at hal_0.5.0 branches
* Update changelog with latest commits and release date
* Change pio::Tx::write to write u32 instead of <T>*
* Add replicated u8/u16 writes to pio::Tx::write
* Switching back to generic version of pio::fifo.write()
* Fix links to make cargo doc happy
Co-authored-by: Jan Niehusmann <jan@gondor.com>
Co-authored-by: Jan Niehusmann <jan@gondor.com>
I managed to avoid the multicore trampoline by messing with the signature of the core 1 startup function.
While the first couple arguments to a function with the arm C abi are passed in registers, once they're filled up, the rest of the arguments go on the stack; so, I put some dummy arguments before the real arguments to force them to go onto the stack. That allows it to be used directly, without needing the trampoline to move the arguments from the stack to registers.
I also changed the startup function to be generic over the function type passed, which avoids the mess of dealing with `Core1Main` and fat pointers and all that.
Using the full module structure generated by the intrinsics macro
interacts oddly with inlining on some optimization levels, causing
a duplicate identical function body to be generated. This doesn't
affect performance, but it wastes space, so just declare the alias
directly which seems to cause the symbol to be aliased as it should
be.
* add example of synchronized PIOs
* Synchronize state machines using WAIT IRQ instruction
* Use "irq wait 0" instead of "wait 1 irq 0"
This way, the initial value of the interrupt flag doesn't matter
* Start state machines synchronized without IRQ WAIT instruction
* Improve API
Co-authored-by: Andrew Straw <strawman@astraw.com>
* Add an rp2040 specific #[entry] macro.
This macro extends the one from cortex-m-rt by code to unlock
all spinlocks on boot.
* Idiomatic pointer arithmetic
Apply suggestion by @9names, improving address calculations.
(This doesn't change the generated code at opt levels 2 or "z".)
Co-authored-by: 9names <60134748+9names@users.noreply.github.com>
* Update BSP authors to include 'rp-rs developers'
* Update BSP readme's to reflect current release version
* Update BSP changelogs
* Fix version number in HAL README
* Update changelog for 0.4.0 release
* Enable rt feature for irq example in Cargo.toml
* Bump pio/pio-proc deps to 0.2.0, update pio examples
* Update BSPs to latest ws2812-pio, remove unused pio dep
* Fix usage of pio_proc in doc comment
* Clean up pio doc-example
* Update rp-pico to latest i2c-pio
Co-authored-by: Jan Niehusmann <jan@gondor.com>
